I am paying a large amount of money to Comcast for high speed internet

I am paying a large amount of money to Comcast for high speed internet and it is terribly slow. I have been trying to get to my email for more than an hour and all I get is that spinning blue circle. Please refund my money.

I to have been having the same problem for months and I get ABSOLUTELY no where when I contact customer service. I have tried the reboot and everything else. I am really considering switching carriers at this point. I have even pulled out the old blue ethernet cord to try and accomplish SOMETHING. This is ridiculous. I to pay a high cost for this service and NEVER seem to get it bit YET, Comcast wants their payment monthly!!!cpakker wrote:
I am paying a large amount of money to Comcast for high speed internet and it is terribly slow. I have been trying to get to my email for more than an hour and all I get is that spinning blue circle. Please refund my money.

Similar Messages

Paying Too much Bill and still not getting the High speed Internet that I am Supposed to

First month I got my bill it was acceptable over $150 because all the technician work and line-up and everything. So I have Verizon double play and Direct Tv together and in 2nd month I got $143.14 bill just for 3mbps internet and on the bill it says i added the service "Change in the Partial Month". First of all I didn't even added the service and it was supposed to be less than $100 dollar bill because the Direct Tv is $23.99 which is my Entertainment Package and the Double Play is $50.99, so the total bill is going to be pretty much like $90-$100 with tax and everything. If the next month bill comes more than $100, then I am definitely cancelling Verizon and switch to Optimum Cable. By the way I had Comcast triple play which was $100 for Tv, Internet & Phone for 2 yeas before I had Verzon and I used to get more than 20 mbps internet speed but in Verizon I am getting only 3mbps which is very unsatisfied.
Thank you for your time, Verizon

Rounding to the nearest dollar is $75.00, plus an additional $10-$12,
would not equal $143 per month.
Is there a possibility you went to your online account and accidentally
pressed for a change in a particular service? Check your online account
to determine what may have occurred.

Constantly getting messages Firefox is using large amounts (600,000+) CPU & sometimes for the plug-in,too. Solution?

When using Firefox, I now get messages from Norton, constantly, stating CPU usage is abnormally high (600,000+). I sometimes notice a plug-in container usage is also high on my Windows task manager. It's making my computer very slow. Any suggestions?

I think your 4GB of RAM could have something to do with it. 4GB is a pretty small amount and the minimum. Your system is really like a clogged vacuum and is not running to it's full potential. I would upgrade the RAM. My Macbook Pro is a Late 2011 2.2ghz i7 quad-core with 8GB RAM and fly's... After all, RAM is used to store files as you are using your system and when it uses up the 4GB writes those files to the HDD/SSD. The more RAM, the faster you'll be, because it will take a lot longer to fill up the RAM. I can put 16GB of RAM in my model, and plan on it. I also will be getting a SSD very soon and probably first.

BEX large amount of filter values

We have BEX Reports within webtemplates for the users. They want to filter a large amount of values (about 100)for e.g. the materialnumber. The materialnumbers for the filter differ from day to day.
Does anybody know how it is possible to add so many values in the filter or in the variable screen without typing them one after another?
Is it possible to add the filter values via an excel sheet?
Thanks for tips.
Eva

Hi,
just some addition.
Filling a variable (a select-option table) with lots of values (like you want maybe 100 entries) may lead to a short dump 'SQL STATEMENT TOO LARGE'.
In that case, if this selection is not too dynamic, I would recommend to use hierarchies and do the restriction on hierarchy nodes instead of single entries.
Siggi

Re: Paying for blast speed - getting only 30 Mbps

Thanks Lewis I will give it a shot And I will continue to focus on this until its resolved....In my entire life (over 40 years) i have only complained to one other company, I am usually the type who will just walk away to never come back. This, however, feels like being robbed monthly and since I am not made of money (quite far from it) it has stepped up to a whole new level of personal.But look on the bright side, Tech number 8? 9? will be here friday!lol

kibbleman wrote:
After all that went on, comcast was still only able to get my "105" speeds up to around 37mbs...I asked for a credit back from the year I paid for that service, and was denied. So I decided to step down to the "25" internet speed. Customer retention gave me a "deal" for a year (which I assume will slowly crawl back up over 100 dollars a month). They also told me there was a charge for some "install package" that had to be shipped. I told the man that if I was charged for that, I would cancel comcast entirely, so that was waved (YAY)After about a week since downgrading, my internet speeds are pulling about 57mbs pretty constantly, what magic occured to fix a problem that could not be figured out before I could not tell you, but it just makes me think that the entire company is a joke. I have started a nice letter to comcast as I am still pretty upset over being ripped off for a year.....but what does one customer (of 17 years) really matter to them anyway.I suggest that everyone who pays for this high speed internet to really check what they are actually getting out of it, and also have your friends check as well.....Another company to big for its own good, and pretty much a monopoly in certain markets.Bravo Comcast.....BravoI will say something here, I too have been on the Comcast internet since at least the Kuwait war which was when? So call me a long time user. Right now I am on the Blast 50 (down) 10 (up) plan & I on average get 55-62 down & 10-12 up but this is on my laptop with the intel [email protected] Ghz. with turbo mode of 3.3. if I use my 13 year old HP desktop @ 2.53 Ghz. I am lucky if I get 13 Mbps. down & 6 Mbps up. I feel it is because the HP is loaded with tons of software that is slowing it all down. So how old is your computer?

Can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...

can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...
and i m getting locked phone from my family memeber for free. but he's with some other carrier. so can i get official unlock for that phone. please help me with this.
thank you

Only the original cellular provider can authorize unlocking. You will need to contact them to determine if they offer unlocking and if the phone qualifies.

How many times do you have to pay for Creative Cloud complete plan prepaid if it says an amount of money per year? do you have to pay that every year?

how many times do you have to pay for a Creative Cloud complete plan prepaid if it says an amount of money per year? do you have to pay that every year?

Perhaps the unclear part here is that the Cloud is a subscription offering. You never pay for it outright and never actually own it.
12 months pre-paid simply means paying the full 12 months subscription upfront. The following year, you do the same. And the same every year after that.
Like any subscription, if you want to keep using the software, you keep paying the monthly (or annual) fee every month (or year), year in, year out.
When you cancel your subscription, or it expires and you don't renew, then the software stops working.

What does "other" mean at the bottom of the sync page? It is taking up a large amount of space on my phone.

What does "other" mean at the bottom of the sync page? It is taking up a large amount of space on my phone.

The other section contains temporary files, such as text messages, iMessages, voicemail, and other storage that is meant for small short term use. If the other section of your phone has grown quite large and you can't account for what it could be then you may have experienced a syncing error to iTunes.
I have experienced this problem frequently during my years with the iPhone. The other portion of my phone grows with every sync of my phone to iTunes. There comes a point where it takes up the majority of the space on my iPhone, making the device near unusable.
When it grows to this extent is usually cased by an error during the syncing process. Any information iTunes can't reconcile during the syncing process is saved out of sight, out of mind, in the 'other' section.
You will never be able to see or recover this section unless you are very savvy and know how to poke around the archived iPhone back-up on your computer. (if you are thinking of trying, stop. It will not be worth your time and effort, or if using third party software, the money or spyware associated with it *cough* iTools *cough*).
The only fix I have found that works is to back up your phone to iTunes, and preform a 'restore'. This erases the content of your phone, and restores it to factory settings.
That is you phone will be as if you took it fresh out of the box. You can preform a restore from back-up through iTune, or iCloud to get your content back.
Lo and behold your have trimmed the mystery meat.

Am I really the winner of a very large sum of money?

Yesterday, I received a post on Skype, from a christopher.foster16 who wanted to make contact with me, but also informed me that I was the winner of a very large sum of money in Great British Pounds. He gave security ? numbers and a name I must contact to have the money sent to my address which I was asked to give in an email to Mr Petersen whitehead skype cash [email protected]
The prize amount is very tempting ofcourse, but my son said it has to be checked out as he thinks it is a definite scam. what can I do about this?...anyone know Please. I am 83 years old, and only use skype to contact my relatives and friends who are overseas.
Thankx.
Post transferred from blog article;
subject/title edited accordingly.

Just ask them to send the money to you with a currier post.

Firefox is using large amounts of CPU time and disk access, and I need to know how to shut down most of this so I can actually use the browser.

Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.

Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working.

Creation of data packages due to large amount of datasets leads to problems

Hi Experts,
We have build our own generic extractor.
When data packages (due to large amount of datasets) are created, different problems occur.
For example:
Datasets are now doubled and appear twice, one time in package one and a second time in package two. Since those datsets are not identical, information are lost while uploading those datasets to an ODS or Cube.
What can I do? SAP will not help due to generic datasource.
Any suggestion?
BR,
Thorsten

Hi All,
Thanks a million for your help.
My conclusion from your answers are the following.
a) Since the ODS is Standard - within transformation no datasets are deleted but aggregated.
b) Uploading a huge amount of datasets is possible in two ways:
b1) with selction criteria in InfoPackage and several uploads
b2) without selction criteria in InfoPackage and therefore an automatic split of datasets in data packages
c) both ways should have the same result within the ODS
Ok. Thanks for that.
So far I have only checked the data within PSA. In PSA number of datasets are not equal for variant b1 and b2.
Guess this is normal technical behaviour of BI.
I am fine when results in ODS are the same for b1 and b2.
Have a nice day.
BR,
Thorsten

Large Amount of Data in JSF

Hello,
I am using the Table Group component for displaying data in my application designed in Java Studio Creator.
I have enabled paging on the component. I use CachedRowSet on the bean for the page for getting the data. This works very well at the moment in my development environment. At the moment I am testing on small amount of data.
I was wondering how does this component perform with very large amounts of data (>75,000 rows). I noticed that there is a button available for users to retrieve all the rows. So I was wondering apart from that instance, when viewing in a paged mode does the component get all the results from the database everytime ?
Which component would be best suited for displaying large amounts of data in a table format?
Thanks In Advance!!

Thanks for your reply. The table control that I use does have paging as a feature and I have enabled it. It still takes time to load the data initially.
I wonder if it is got to do with the logic of paging. How do you specify which set of 20 records to extract from SQL.
Thanks for your help!!

Open Large amount of data

Hi
I have a file on application server in .dat format, it contains large amount of data may be 2 million of records or more, I need to open the file to check the record count, is there any software or any option to open the file, I have tried opening with Notepad, excel .... it gives error..
please let me know
Thanks

Hi,
Try this..
Go to AL11..
Go to the file directory..Then in the file there will be field called length..which is the total length of the file in characters..
If you know the length of a single line..
Divide the length of the file by the length of single line..I believe you will get the number of records..
Thanks,
Naren

Bex Report Designer - Large amount of data issue

Hi Experts,
I am trying to execute (on Portal) report made in BEx Report Designer, with about 30 000 pages, and the only thing I am getting is a blank page. Everything works fine at about 3000 pages. Do I need to set something to allow processing such large amount of data?
Regards
Vladimir

Hi Sauro,
I have not seen this behavior, but it has been a while since I tried to send an input schedule that large. I think the last time was on a BPC NW 7.0 SP06 system and it worked OK. If you are on a recent support package, then you should search for relevant notes (none come to mind for me, but searching yourself is always a good idea) and if you don't find one then you should open a support message with SAP, with very specific instructions for recreating the problem from a clean input-schedule.
Good luck,
Ethan

Why each time I try to save my day's work,version WITH mark-ups and version w/o, does it say "you have placed a large amount of text on clipboard do you want to access this? What is clipboard and how can I just save my work in its proper file?

I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

I am paying a large amount of money to Comcast for high speed internet

Similar Messages

Maybe you are looking for