I am really confused about the so many versions of Mozilla Firefox and whcih version is the best ???

Iam using now Firefox 10.0 but iam not sure whether it is the latest version or even the best one ??

Firefox 9 is latest, if you are not a expert or a tester, you should use always release stable version, you are using Firefox 10 which is beta, i suggest you to install Firefox 9, but i dont know it is best or not, but its good.:)
* getfirefox.com

Similar Messages

Confused about the battery...

Hello everyone,
I'm from Pakistan and I just switched to Mac almost 2-3 weeks ago. Since, they have proper apple authorized dealers here so I finally decided to get one for myself. I had some confusion about the battery and my system and now I'm getting very much concerned and worried as a matter of fact.
I installed coconut battery (as few people suggested me) to check my battery status. First of all, it shows the age of my Mac as 5 months, which is pretty surprising since I got a brand new one and even the condition is of a brand new one so I have no clue why did it say that.
Secondly, I would like to tell the condition of my battery:
Current Battery Charge: 3591 mAh (I'm using on battery power right now)
Maximum Battery charge: 4068 mAh
88%
Current Battery Capacity: 4068 mAh
Original Battery Capacity: 4100 mAh
99%
Additional info:
Battery-Loadcycles : 12
Age of your Mac: 5 months
Charger connected: No
Battery is charging: No
I am just concerned that my battery current capacity decreased to 99% after just 12 load cycles. Why is that? Some people tell that they have a 100% even after using it for a long time and other than that does anyone have any idea why is the age being shown as 5 months when I have only used it for 2 weeks.
I'm really confused.
Another suggestion that I want is that in Pakistan, we are having major electricity load shedding so I can't keep it on AC power most of the time so if my computer is shut-down and being charged. If the electricity goes and when it comes back and it starts charging to the point from where it left, will that waste the load-cycle or will it continue to charge it from there without wasting cycle? Does that affect the battery life? (Assuming that the computer is shut-down while being charged)
Last thing, should I use it mostly on AC power or is it better to charge it and then drain the battery and then charge it and then use. Till how much percent should I keep using on the battery power and then connect the Magsafe connector?
Please help people
I'd highly appreciate if you could answer my questions.
Thank you.

I was told that it is best to keep it plugged in and connected to the charger when you can, but if you are not able to do that then just use battery power. I just know you don't want too many cycles, which means you don't want to drain the battery completely then fully recharge it. You should calibrate the battery, which is pretty much just draining battery then recharging it, every couple of months if you keep it plugged into the charger and don't use just the battery often.

I'm confused about the apple ID transition from my aol screen name. Does it continue to use my aol email as my apple ID, converting it somehow or do I need to provide a new email address or just create a new username for the apple ID?

I'm confused about the transition to an apple ID that doesn't use my aol email to sign in. The instructions are vague and ambiguous. Any help would be appreciated.

OK, so if your current Apple ID using your AOL Username (like johndoe), then you need to log onto Manage your Apple ID and EDIT that AOL Username to a valid email address: Apple - My Apple ID
If you have an AOL email address (like [email protected]), and you are not using that as another Apple ID, you can change the AOL Username Apple ID to that. Otherwise, you can change it to any valid email address (which you will have to verify when you change to it).
Hope that clears it up. Post back if it doesn't!
Cheers,
GB

Confuse about the document

Hi,all . From the document ,i had confused about the following .
Automatic Undo Management in Oracle RAC
url >> http://docs.oracle.com/cd/B19306_01/rac.102/b28759/adminrac.htm#CHDGAIFJ
Oracle automatically manages undo segments within a specific undo tablespace that is assigned to an instance. Only the instance assigned to the undo tablespace can modify the contents of that tablespace. However, each instance can read the undo data blocks created by any instance. Also, when performing transaction recovery, any instance can update any undo tablespace, as long as that undo tablespace is not currently being used by another instance for undo generation or transaction recovery
what's the meaning of above that is bold ?

Say you're running a 2-node RAC and node 2 dies. The services which were running on node 2 now get re-located to node 1. It is then possible that node 1 will perform transaction rollback/recovery and, when it does so, it will need to be able to read from node 2's undo tablespace (and maybe update the undo segment headers in node 2's undo tablespace, too).

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Confused about the meaning of Time Quota Types

I am learning SAP-HCM on IDES 6.0. I am confused about the meaning of Time Quota Type. I have gone thru the SAP documentation, but still not clear about it. Please help me with a few examples. How is it different from Absence Type?

Hi Gopal ,
Absences are very generic ones that we create which needs to be reflected in IT2001 and dedcution can happen.
Absence Quotas are the limited entitlement that is fixed say ur eligible for 10 days sick leave so here this is a Quota for each year and so becomes a Quota say Sick leave Quota =10 and will be seen in IT2006.
Now an absence needs to be linked to this Quota for dedcution.
An absence can be or may not be linked to a Quota.This depends on business Requirement.
Let me know if u have further Questions.
Thanks
Swati

Confused about the 'cpu fsb clock frequency' setting, etc., in cell in bios

just got a new k8n neo2-f nforce3 board with an a64 3500+ venice chip. It is properly recognized in the bios and windows as an a64 3500+ at 2.2ghz, but I'm confused about the cell menu settings in the bios. I see a 'cpu fsb clock frequency' which was automatically set at 200mhz, but the fsb runs at 1Ghz (1000mhz), so what is the 'fsb clock frequency' if not equal to the cpu fsb? Is 200 the correct setting for that? Should I need to change any of the other settings in here? I wonder, because my 3dmark03 score only went up 200 points from the same system with a AthlonXP 2500+ chip and kt4avl mobo, which seems like a low increase to me.....

I would set that to Manual in BIOS, so that you can incremently increase the CPU speed without causing a sudden crash. Each system is different and operates within the specs of not only the CPU, but system memory and PCI-E add-ins as well. Your video card is the primary driver behgind your 3DMark scores...but you haven't listed that?!

Confused about the default schema

Hi,
I am a little bit confused about the schema concept.
I want to create a new schema called APP and then create several users and roles based on the schema APP. The default schema for the users should be APP achema.
How can I make the schema APP the default schema for the new users that I am creating?
I feel that there are some schema design concepts that I have to learn. Is there any resource on the internet that I can read and learn more about oracle schema design best practices?
Any help would be appreciated,
Ali

A schema holds object definitions, and in the case of table & index objects the schema also holds the data.
A user owns the schema.
Therefore the user 'owns the definitions (including any functions, procedures, sequences, tabels, etc.)
Other users may be granted access to some, or all, of the objects in a schema. This is done through the 'GRANT ...' command. For example, consider the following steps:
1) create user app_owner
2) create table object test owned by the app_owwner
3) create user app_user
4) grant select, update, insert and delete on app_owner's test table to app_user
5) add synonyms to avoid needing to qualify the table's schema name.
done as follows:
oracle@fuzzy:~> sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 3 20:07:32 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Create the app owner userid. Note there is no need to ever log in to that user, even to create tables.
SQL> create user app_owner
2 identified by xyz
3 account lock
4 quota unlimited on users
5 default tablespace users
6 temporary tablespace temp;
User created.
Creating objects in a schema can be done by providing the schema name, or by switching schema in newer versions of Oracle
SQL> create table app_owner.test ( t number );
Table created.
Create a userid that will access the table. Set that userid up to access the database and (for future) give it the capability to create it's own synonyms
SQL> create user app_user
2 identified by xyz
3 temporary tablespace temp;
User created.
SQL> grant create session to app_user;
Grant succeeded.
SQL> grant create synonym to app_user;
Grant succeeded.
Now give the user access to the objects
SQL> grant select, update, insert, delete on app_owner.test to app_user;
Grant succeeded.
Let's test it out. Insert by qualifying the schema name on the object, then create a synonym to avoid using schema, and try it all using the synonym
SQL> connect app_user/xyz
Connected.
SQL> insert into app_owner.test values (4);
1 row created.
SQL> create synonym test for app_owner.test;
Synonym created.
SQL> insert into test values (3);
1 row created.
SQL> select * from test;
         T
         4
         3
SQL> Note that some people want to use PUBLIC grants and PUBLIC synonyms. This is a real bad idea if you want to ensure long term security of the data and want to host several different applications in the same Oracle instance.
This, and a whole lot more, is in the 'Concepts' manual for your version of the database at http://docs.oracle.com

Suggestions about the best tool for quality check for an ADF application

Hi All,
I need a few suggestions about the best tool for quality check in our ADF applicaiton.
ours is a small size WebCenter Portal application which neither uses any task flows nor consumes any portlets.
It has many jspx pages that use ADF components like table etc, consume web services using web service clients, and has some java classes.
We have come across below option to implement the code quality tools.
1. Jdeveloper inbuilt Staus option in View tab
2. PMD extension for Jdeveloper
3. Red Samurai
Few more suggestions or best practices would be really helpful.
Thanks,
Usha

Some general ADF / Webcenter coding standards -
http://umeshagarwal24.blogspot.com/2012/06/adf-coding-standards-check-points.html
You can use JAudit as well as mentioned in the blog.

When I click the View option to view a document on my insurance website, I only get a blank screen with words Mozilla Firefox, and below it, "Search Bookmarks and History" in the upper left corner of the screen.

This also happened at a bookseller's website, when I clicked on the photo of a book to enlarge it. Instead of showing me an enlargement, it took me to the same blank screen with the title bar, "Mozilla Firefox", and below it another bar with the words "Search Bookmarks and History," both at the top left of the screen. This has happened repeatedly at the two websites I have mentioned. When I went to the same sites using Internet Explorer, the error didn't occur. I did a Microsoft system restore for a previous restore point, but it still did not eliminate this glitch.

Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* New Old Menu: https://addons.mozilla.org/firefox/addon/new-old-menu/
* Personal Menu (Personal Firefox Button): https://addons.mozilla.org/firefox/addon/personal-menu/

I switched from Internet Explorer to Mozilla Firefox and my bookmarks don't appear to have been transferred. The FAQ's say it should be in a folder marked Internet Explorer in the "Bookmarks Menu", but it's not there.

I switched from Internet Explorer to Mozilla Firefox and my bookmarks don't appear to have been transferred. The FAQ's say it should be in a folder marked Internet Explorer in the "Bookmarks Menu", but it's not there.

Did you see a "Bookmark" tab in your Menu Bar? All of your IE Favorites should be there if you pull it down.
FYI, It's called Bookmarks in Firefox.

I open up Mozilla Firefox and shortly after another Minimized Mozola Firefox opens up but with out anything on the screen???

As I said I open up Mozilla Firefox and sometimes right away a new Mozilla Firefox open up only in the Minimized state. I can cancel it and it will come back. If I don't cancel it it will open up directing me to a program or sometimes it will open up soon to Fox news or something like that. If I X it out soon it will come back and will continue this.

same problem too. what do we do?

Not very savvy, confused about the features(client hosting, in browser editing)! Clarify for me, please?

Hi! I'm in love with the idea of in-browser editing. I'm doing web design for clients using Adobe Muse at the moment, and it's great. The only setback is that it's really hard for the clients to update the page themselves, etc. My main and only reason to use BC would be to upload all of my clients websites on it and let them use the in-browser editor. Am I wrong to think that that's how it will work? I sign up, and just upload the websites with their own domains, then set up the client's log in info for them?
I've heard about a limit to how many websites I can have, and users. Are the users the amount of clients I can let use the in-browser editing? Only 3? Please help me out, team!
Right now I'm using a different hosting (will not name) it was my first hosting provider, and I've used it ever since so I'm so used to unlimited websites, etc. Obviously, I'm so impressed by the BC features though that I really want to be apart of it.
Also, would this be under the $12 a month plan?

Adobe just released this in-browser editing tool for Muse websites- you might want to try it:
Adobe® Muse™ CC In-Browser Editing
As far as I am aware, there is no limit to how many website you can have. The 3 that you have mentioned is likely referring to 3 admins per site- but note that you can have more admins for a fixed fee.
You might also be getting confused by 5 free basic sites that come with a creative cloud subscription- so fyi, you can have as many sites as you like and the hosting fees, I believe, start from around $6-$39 per month.

So confused about the size.... how exactly should i set them?

i've written codes like:
JFrame fr = new JFrame ("FR");
JTabbedPane tp = new JTabbedPane();
JPanel pa = new JPanel();
JTextArea ta = new JTextArea;
fr.add(tp.add(pa.add(ta)));
Questions:
1. How do I set the SIZE (dimension) of the GUI (the whole thing)
2. How do I set the size of the TextArea
I was thinking:
setSize = set the default size of a panel/compent
setMaximumSize = set the maxium area of that panel/compent (that'll allow you to drag to )
setMinimumSzie = set the smallest window/pan/comp that you can drag to
i tried fr.setSize or whatever... nothing just work.....!!
Sorry... im really a beginner and i don't know where can I have a good read about all these Java.awt objects... JPanel/Frame/tabbedPanel/TextArea/button/watever.... sooo many and so easy to be confused....
sorry i about the poor english... hope someone can help me out....
thanks!

Some helpful resources in the tutorial:
Trail: Creating a GUI with JFC/Swing
1 - Lesson: Using Swing Components
a) - A Visual Index to the Swing Components
b) - Using Top-Level Containers
2 - Lesson: Laying Out Components Within a Container
For the JFrame or other top-level container we use the "setSize" method.
For JTextArea the api recommends we set the rows and columns to provide size information for the parent layout manager. For example - "new JTextArea(6, 18)"
Some layout managers, such as FlowLayout and GridBagLayout will use the preferredSize for sizing components so you can use the "setPreferredSize" method (in Swing and in j2se 1.5+ AWT).

Confused about the 2 Different Verizon 4G, 3G Maps and if I have 4G in Salt Lake City, Utah

Hello-
I am really wanting either the Samsung MIFI type 4G device or the Thunderbolt HTC phone but I can't get a straight answer on if I am in a 4G area. I called and one Verizon agent sent me to a URL that had various shades of red, supposedly showing the various levels of 4G, and 3G in the Salt Lake Area. it made no sense to me because the various shades of red changed depending on whose computer I was checking and the display settings. it looked like there was 4G, not extended but the full on 4G in a large part of Salt Lake City. I called back and this person took me to the map that is just red and white. I think the red was either 3G and the white is not 3G or the red is 4G and the white areas are not 4G
Why would they not have one map that is clear about if areas have 4G, have a mix of 4G & 3G and whatever else is available? what is up with 2 maps, one being very subjective because the various shades of red can be different depending on the display settings.
I did get a reply from an earlier post that was an article someone sent me to saying Salt Lake City has no 4G but should by the end of 2011. what is up with leaving Salt Lake city behind? This is one of the fastest growing cities in the nation. If I get a 4G device like the Samsung MIFI device or a smartphone that is 4G like the thunderbolt HTC does that mean that these will not work in a 3G area?
Just when I am brave enough to get my first smartphone, it seem silk I get so many various answers from Verizon employees, that they do not really even know.
any advice. I learn from other's suggests, examples, but I do not run out and follow them just because somebody tells me to do it. it is part of how I gather information, learn from other's experiences, and hopefully can make a decision as to what I should do. the 3G MIFI I have had for years does not stay connected past 5 minutes and starting the device and restarting the device is getting to be a bit too much/
thanks in advance for any help. ,Feel free to send me a PM if my post ad your reply seems too novice. I do not care as long as I can learn from what others have to say. :-)

Yes that is the map but the area that is 4G is North-West Salt Lake. Some of downtown is 4G (I guess 4G and extended 4G is that extended is or can be sometimes 4G and sometimes 3G.) I never doubted that Salt Lake had some 4G. I was trying to tell you that the Verizon agent told me that Salt Lake city will not have 4G until the end of 2011. she gave me the URL to an article that validates that. the other map which another agent used is just red and white. She said go by this map since it is more accurate as of now and the one with the various reds is toward the end of 2011. whatever the story is, I have no idea but if you look at the map that you are questioning if I refreshed the map aft checking 4G you will see that most of downtown Salt Lake is not the burgundy red and south of downtown has no 4G at al, just 4G extended and 3G. If you want to check the area where I live it is near 3900 South or on the section of the map you are showing in your post, it is South of 215 and 80 frwys. this area on the map I used this morning is all 4G extended and 3G. I have no idea why the only pure 4G is near the Great Salt Lake, but that area is out where the airport is (west of downtown Salt Lake). Have you looked at the other map that is just red and white? I am not sure of the difference but the agent told me that map is the most current map if you want something that is current.
I am confused. But I am still confused as to why you were wondering if I was refreshing the map? I was telling or describing in my post what the agents at Verizon had told me, not what I had seen on the multi colored map.
thanks,

I am really confused about the so many versions of Mozilla Firefox and whcih version is the best ???

Similar Messages

Maybe you are looking for