I am receiving "500 Internal Server Error" whenever I use Firefox

I have un-installed, cleaned my registry, restarted, done all the cache etc. and still after re-installing I receive a 500 Internal Server Error.
Firefox is my favourite browser, I'd hate to lose it.

Ajay Sharma wrote:
Hi,
Please tell me How to run autoconfig. on application tier ?
should I run this after shutting down the application tier ?
Regards,
AjayBefore you run AutoConfig, please compile the JSP files as per the doc referenced above and see if this helps (stop the application services, compile the JSP pages, then start the application services).
You can run AutoConfig while the application services are up, but you need to restart after AutoConfig is done.
Thanks,
Hussein

Similar Messages

Receiving "500 - Internal Server Error" on Oracle hosted free workspace

Hello everyone...is there any planned outage for http://apex.oracle.com/pls/apex/?
I'm receiving an error: 500 - Internal Server Error
Best regards.

Just tried it here and received the usual login screen....
Thank you,
Tony Miller
LuvMuffin Software
Ruckersville, VA

I keep getting "500 Internal Server Error" when I open Firefox. I don't know why. This just began.

I recently uploaded the latest version of McAfee Security Center and the latest version of Firefox. Now when I open Firefox all I get is "500 Internal Server Error." I am now sure what do to.

There is an existing thread which might help you with this : see
https://support.mozilla.com/en-US/questions/780053
For background information, see the Wikipedia article on HTTP Codes at http://en.wikipedia.org/wiki/List_of_HTTP_status_codes
- and, if you want more information, there's a page explaining the 500 Error [http://www.checkupdown.com/status/E500.html HERE]
In brief, the 500 means that your request has reached the server but the server cannot process it, for some unspecified reason. It is not a client-side error message.

Receive "500 Internal Server Error" message

I receive the following message when trying to login to a website. I've deleted all cookies, passwords, etc associated with this site with no luck.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Error Message Received:
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
IBMHTTPServer at www26.anthem.com Port 81

HI,
It's the website, not your browser or connection.
http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
Try here: http://www.anthem.com/
Carolyn

500 internal server error..plz help

hi,
since i started working on oracle apps...this forum has proved itself alt helpful...
i have performed a single node installation successfully over my laptop on win xp sp2 os.
alt of error generated bt in da end i always found a solution here...
guys like hsawwan are a great asset for this forum.....
may GOD reward u guys fr da job u r doing by helping others....
my recent problem has left me in a fix....
problem:
after a successful installation my system was working very fine ... i used the application and every thng seemed to work ok...
bt thren i restarted my pc nd this chaos started ....
first m receiving
500 internal server error...
thn a blank screen
now again 500 internal server error...
steps i performed
1-restarted db listener
2-Disabled Distributed JVM Cache by changing "LONG_RUNNING_JVM=" from "true" to "false" in the oc4j.properties.
reference =metalink Doc ID: 761869.1
plz help me get rid of this error.....
m nt an xpert .m a newbie.. so if u xplain in plain simple word i'l b grateful....
thanx thanx thanx in advance ....

HI
Sorry for late response ...
actually i performed the installation of 12R ON MY LAPTOP...
SORRY for posting it in 11I INSTALLATION issues...
my problem was solved by this action plan...
i am writing it here for some future reference ...
open a new shell and set your apps environment
then goto following directory -------->>> cd $ADMIN_SCRIPTS_HOME
stop this service ---->>> adopmnctl.sh stop
make a check if it is really down--------->>> ps -ef | grep <USER> grep opm (optional)
delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/* (optional but it would be better if u perform it)
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
again start the services ------>>> adopmnctl.sh start
restart your machine ....
this solution worked for my pc ...
note ** solution may differ for different users ....
thanks a lot helios and hsawwan for ur support .... :)

Error 500--Internal Server Error while trying to create a new DataModel

Infrastructure_: OBIEE 11.1.1.5 on 64 bit Linux (RHEL)
Issue:* We get Error 500--Internal Server Error whenever we try to create a new data model in BI Publisher.
Details:* We installed OBIEE 11.1.1.5 on 64 bit Linux machine. Whenever we try to create a new data model in BI Publisher, the page errors out with the message
"Error 500--Internal Server Error, From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request"
Edited by: user9544005 on Dec 29, 2011 7:02 AM

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

Cups - 500 Internal Server Error

hi,
I have just installed cups and I keep getting a "500 internal server error" whenever I navigate off the home page of my CUPS web admin.
I tried cups-1.4.6 and 1.4.4 but same problem
please help
/var/log/cups/error_log
E [29/Apr/2011:00:07:40 +0200] PID 5457 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 6!
E [29/Apr/2011:00:09:42 +0200] PID 5505 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 6!
E [29/Apr/2011:00:09:47 +0200] PID 5506 (/usr/lib/cups/cgi-bin/printers.cgi) crashed on signal 6!
E [29/Apr/2011:00:12:18 +0200] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [29/Apr/2011:00:12:26 +0200] PID 5616 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 6!
E [29/Apr/2011:00:13:23 +0200] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [29/Apr/2011:00:13:32 +0200] PID 5650 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 6!
E [29/Apr/2011:00:13:43 +0200] PID 5652 (/usr/lib/cups/cgi-bin/printers.cgi) crashed on signal 6!

here it is.
I can also say that I was using cups a few months ago and work properly on same system. But I uninstalled it because the printer broke and now I install it again with new printer and got this error
TARGET SOURCE FSTYPE OPTIONS
/ /dev/sda6 ext4 rw,relatime,barrier=1,data=ordered
├─/proc proc proc rw,nosuid,nodev,noexec,relatime
├─/sys sys sysfs rw,nosuid,nodev,noexec,relatime
│ └─/sys/fs/fuse/connections fusectl fusectl rw,relatime
├─/dev udev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=191754,mode=755
│ ├─/dev/pts devpts devpts rw,relatime,mode=600,ptmxmode=000
│ └─/dev/shm shm tmpfs rw,nosuid,nodev,relatime
├─/home /dev/sda7 ext4 rw,relatime,barrier=1,data=ordered
│ └─/home/chmurli/.gvfs gvfs-fuse-daemon fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100
├─/mnt/xp /dev/sda1 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
└─/mnt/dane /dev/sda5 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
Last edited by chmurli (2011-04-29 06:52:54)

As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
Ruchi

Hi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo

Received HTTP response code 500 : Internal Server Error

Hi All,
In my scenario EANCOM to IDOC, I am getting an error in the sender communication channel (FILE Adapter). It is being picked up from the sender directory successfully but not reaching the XI box (no messages seen in SXMB_MONI).
The error in the runtime Workbench says the following:
Transmitting the message to endpoint http://gdrsap.nestle.com:50000/XIAxisAdapter/MessageServlet? using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Internal Server Error.
Regards,
Manohar

Hi Murli
error code 500 stands for Internal Server Error
This code is the default for an error condition when none of the other 5xx codes apply.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
you have to restart J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

SOAP Receiver error - HTTP 500 Internal Server Error

Hi,
We have a FILE to SOAP Asynchronous scenario to send data from our PI to customer PI.
We are sending PGP encrypted file as the payload. So, foll settings have been maintained:
Do not use SOAP envelope in Sender and Receiver SOAP
nosoap=true in the URL.
Message transform bean in the SOAP channels.
File is successfully sent and received through SOAP protocol.
But, both the SOAP Receiver and Sender channels are in error:
SOAP Receiver error:
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error.
As, this is a asynch scenario, we are not expecting the response.
SOAP sender at customer PI is in error. Error text is not mentioned. It just displays: error occured.
At both the ends, we do not have Repository objects as there is no mapping.
Kindly help...
Thanks,
Pratibha.

Hi All,
For the same scenario, we need to Sign the data using the WebServices Security.
(We are sending PGP encrypted data as SOAP payload using MTB, i have ticked "Do not use SOAP envelope")
I have selected WebServicesSecurity as the security profile in the SOAP Receiver and selected "Sign" in the Receiver agreement, have provided our private cert.
Tried sending a message. Communication channel audit Log shows the message:
Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
Success SOAP: request message entering the adapter with user J2EE_GUEST
Success SOAP: Web Services Security processing...
Success SOAP: Web Services Security processing skiped. Empty body...
Success SOAP: completed the processing
Please suggest how I can apply the WSS..
Thanks,
Pratibha.

ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error, in Receiver soap A

Greetings All,
In my scenario i am calling external service of SFDC using receiver soap adapter but i am facing below error in the response.
ADAPTER.HTTP_EXCEPTION, HTTP 500 Internal Server Error
I am creating the soap structure/envelope using Java mapping since need to add additional parameter in soap header.
I am setting the URL in java UDF using parameter TServerLocation.
In comm channel checked "do not use soap envlope" also set the format to text/xml using MessageTransformBean.
The service was working fine when tested in SoapUI tool.
Looking forword for your help and will be appreciated.
Thanks,
Sandip

Hello Sandip, I hope you are doing fine!
I`m not sure if you are using a sync or async scenario...
The behavior that you describe is the expected behavior for SOAP receiver adapter in nosoap mode, asynchronous case.
The explanation that lies behind it is that in nosoap mode the bahavior is just similar to pure HTTP communication. An HTTP 4/5 error received from the target server is treated as HTTP internal error and logged into AFW as an error. The message in an asynchronous scenario without acknowledgements is normally seen as successful on IE side as it is successfully sent to the target system. It can be even successfully consumed by the target webservice, but for amo other reason, the HTTP request from SAP PI to the target system returns HTTP 500 error.
If you ask for system delivery acknowledgements, you should get a non-successful delivery acknowledgement.
In synchrnous scenarios, when a response is expected, the behavior is different.
If this is a sync scenario, there is an official patch released on the service marketplace. SAP Note 1533195 is released.
In addition to deploying the patch, apply the additional configuration steps. As per this note, for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
you will need to set:
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
If you need to bypass the HTTP errors in the communication with the target system, you need to apply note 1055678.
To apply it, just add for the default module
sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean in your receiver
channel, Modules tab the following:
Module Key = soap
Parameter Name = XMBWS.NoSOAPIgnoreStatusCode
Parameter Value = false
If you need any SOAP fault related behavior or any other SOAP related feature, you should setup the channel to run normal SOAP mode, since as already mentioned nosoap mode is used now.
In addition, check note:
856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
section "1. Sender Connection"
Q: I get a server error "500 Internal Servler Error" from the
adapter's servlet. What went wrong?
and get the trace to give you more details of the error.
One more thing, VERY IMPORTANT.
I STRONLGY recommend you to update all XI-PI components to latest patch available in the Service Marketplace. Thery are:
XITOOLS, XIESR, XIAF, XIAFC, MESSAGING, XIGUI. Some of them might not be present depending on the release of you system. e.g: 3.0, 7.0, 7.1
I hope this helps you.
Cheers
Jorge Eidelwein

Received HTTP response code 500 : Internal Server Error in XI

Hi,
I have configured a scenario SOAP to RFC in XI. when I am sending a message from web service, I got following error
<SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>DeliveryException</code>
                         <text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:144)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
Please suggest.
Thanks,
Ashish

Read blog for all HTTP response code:Http* Errors in XI
and read sap note 804124, 807000

I am receiving 2 errors 500 internal server error nginx and 404 internal server error nginx

I also cannot go from and email message in outlook to the youtube website nor can I get youtube.com to come up. That page gives me a 404 internal server error nginx. Until the last few days I have been able to get to you tube and have not received these errors.

Which security software (firewall, anti-virus) do you have?
Some have been reported to cause these errors.<br />
Panda anti virus may cause the 404 internal server error nginx<br />
I can't remember which software can be causing the 500 internal server error, but it is usually caused by security software adding a proxy to monitor internet traffic

I am receiving "500 Internal Server Error" whenever I use Firefox

Similar Messages

Maybe you are looking for