I am receiving configuration error 16 when attempting to start any ot the CS6 trail apps. Help?

I am about halfway through my trail period using Creative Suite 6 on my new MacBook Pro using Mountain Lion 10.8.3 (the newest version). I keep recieving the "Configuration Error 16" message. What should I do to finish the remainder of my trial period?
With kind regards,
Vincent J. Flotta

http://forums.adobe.com/message/4830552

Similar Messages

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    From an existing Discussion:
    Go to Safari --> Preferences
    Click Security
    Show Cookies
    Type "apple.com" in to top search field
    Select All
    Click Remove
    Click Done
    Repeat the above to confirm they are gone (mine took two attempts)
    Choose Update Genius again in iTunes.
    iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150

  • M Having this error when ever i start any program in windows 7 professional 64bit. please help me

    i scanned my for viruses but no viruses has been found .. i have also scanned my system for malware too and found some threads but now they all are removed .. but m still getting this error ''The Parameter Is Incorrect'' when ever i start any program a runtime
    error occured.. 

    Hi,
    Could you let us know the exact and complete error message?
    The easier way is to use
    system restore to roll back to the previous point without any problem for test.
    Karen Hu
    TechNet Community Support

  • Error when trying to generate any of the 6 DPM reports

    When I try to generate a report I get the following error ( Defers a bit between the reports)
    This one was when I tried to get Tape Management report
    An error has occurred during report processing.
    (rsProcessingAborted)
    Query execution failed for dataset 'DataSet1'.
    (rsErrorExecutingCommand)
    Invalid object name
    'vw_DPM_Media'.

    I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed.  We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory.  Does this confirm that I did have XI installed and licensed at one time?
    If I purchase a more recent version, couldn't I update the reports to use the newer version?  I have all the source code.
    Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
    Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive?  Would that work if I registered all the dll's?
    Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
    To be clear, I do have VS 2003 & 2005, and I have the source code.  I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
    Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
    Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET.  Does that mean that this dll was bundled with Visual Studio?
    I also found this directory on the old server...does this tell you anything?
    C:\Program Files\Business Objects\BusinessObjects Enterprise 11
    I did see that you can still buy XI from CDW.  I have a call into them currently to check with Business Objects for any registrations from my company.
    Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

  • ASP app is throwing error when trying to load any of the Crystal Reports

    The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
    A couple notes:yes, I did search for this problem, I've read (and have been confused by) the documentation both on MSDN and this site. I've never used Crystal within a .NET application that I've written, so please treat me like an idiot.  I've got 16 hours in this issue and I can't figure out what to do.  I don't want to go too far into what I have already tried; I'd rather start a fresh conversation with you (the kind person who is going to save me from death at the hands of my users).
    My application was written in .net 1.1 by an outside source.  Since then, other apps were installed on the same server that were .net 2.0 (don't know if this is relevant).  Recently, we reformatted the server.  When I dropped the application back into its former location and hooked it up to IIS, everything was fine except now we can't get any of the reports to load.  We just get the error above, along with another that says "CrystalReportViewer - rptViewer Error: Object reference not set to an instance of an object."
    The same thing happens on both my Win 2003 app server and my XP SP4 development machine.

    I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed.  We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory.  Does this confirm that I did have XI installed and licensed at one time?
    If I purchase a more recent version, couldn't I update the reports to use the newer version?  I have all the source code.
    Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
    Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive?  Would that work if I registered all the dll's?
    Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
    To be clear, I do have VS 2003 & 2005, and I have the source code.  I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
    Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
    Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET.  Does that mean that this dll was bundled with Visual Studio?
    I also found this directory on the old server...does this tell you anything?
    C:\Program Files\Business Objects\BusinessObjects Enterprise 11
    I did see that you can still buy XI from CDW.  I have a call into them currently to check with Business Objects for any registrations from my company.
    Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

  • I receive an error when attempting to distribute a new form

    I saw this post at some point with no answers. My error states, "The filename you specified is not valid because it does not include a .pdf extension, contains one or more invalide characters or the path preceding it refers to a protected system location". I am choosing to manually collect responses in my email inbox and to distribute it by sending it automatically using Adobe Acrobat; however, i've tried to other response and distribute options and get the same error.  My file name is TestForm.pdf and I have save both a Static PDF (*.pdf) version and a dynamic xml pdf version to trouble shoot. All options still get me the same result when using the distribute wizard. Also, I have Administrator rights to my C: and netword drives, so there's no permission (path) error, no invalid characters issue and it has a pdf extension. - Angela

    I have not. I think it was answered, but I had to find another solution. Waiting months for someone to answer from Adobe was not an option for me.

  • I receive this error when attempting to open up HP Solutions.

    I have an HP Officejet Pro L7590.  It worked fine on my previous HP computer with Windows XP PRO.  I got  an HP computer wiht Windows 7 Pro and updated the driver and it worked as well.  At some point I started getting the following message and now can't open the HP Solution Center.  I tried uninstalling the software and reinstalling. 
    I gave up and used my Sony Laptop with Windows 7 Pro and it worked for 2 years but now I have a different message on that computer which I will address if we can fix this one first.
    parsing error in file c:\ program files (x86) hp\digital\imaging\bin\hpqscloc\1033.xml

    Hi Ralph_Go, and welcome to the HP Forum,
    I understand that you are getting a Parsing error. I will try my best to help you resolve this issue.  I recommend following the steps in cpwizard post for Re: Parsing error in file C:\Program Files (x86)\hp\Digital Imaging\bin\hpqscloc\1033.xml.
    You will be downloading the HP Officejet Pro Full Feature Software and Driver for the HP Officejet Pro L7590 All-in-One Printer.
    I hope this helps, let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • I keep getting an error when attempting to start Match.  It looks like it uploaded all my music, but it won't complete the task without an error.

    Is anyone else having problems getting started with Match?  I keep getting an error message and
    then it requests I close down iTunes.

    Hi,
    Try holding shift key whilst signing out of match then close iTunes. Reboot computer then launch iTunes. Now sign back into iTunes Store and activate iTunes Match. You will be asked to add this computer, do so.
    You should add iCloud status to song view. Go to menu > view > view options and tick box. This will tell you what has been matched, uploaded, purchased, duplicate, inelligible or waiting. If match process is failing to complete, you should delete "waiting" tracks but do not move to trash. Those tracks may include some that match does not like and is preventing process from completing.
    Once process has complete, try adding those tracks again, a small number at a time.
    Jim

  • Acrobat 11.0.7 electronic signature error, "There was an error when attempting to commit this signature".

    Since updating to Acrobat 11.0.7, the electronic signature function has broken. Users receive an error message when trying to insert an electronic signature "There was an error when attempting to commit this signature. The document was not saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder. The document could not be signed. HFT error. This file is already open or in use by another application."
    Error occurs even after saving the PDF locally and renaming. This issue is affecting multiple users and has never occurred in previous versions of Acrobat installed. Temporary workaround is to rollback users to Acrobat 11.0.6.

    Can you try to manually download and install the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000

  • "Unknown Error" when attempting to publish through Muse

    I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
    Any help in the right direction is appreciated!

    Hello,
    I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
    I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
    Chris Mayer
    The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

  • Error when attempting to get processing resources: com.sap.aii.af.service.

    Dear All,
    i am getting below error in RWB in receiver Channel
    Error
    "Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
    Note: outbound has processed succesfully in both ABAP and Java Stack.

    Hi,
    Can you please let us know, which receiver adapter are you using??
    I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
    JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
    CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
    -Rahul

  • Receiving an error when checking out Visio 2013 file from a Sharepoint 2010 site.

    Receiving the following error when attempting to checkout a Visio 2013 file from a SharePoint 2010 site: "Sorry, we couldn't open 'http://sharepoint/folder/folder/folder/folder/file name".  If you need to know the length of any of the folder
    or file name, please let me know. I have checked answers to other questions but none seem to apply or the person responded that the answer did not work.

    Seems that your Microsoft Office Document cache is corrupted.  please try deleting cache folder :
    Clear the Microsoft Office Document Cache by opening the Upload Center->Settings->Delete cached files.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\14.0\OfficeFileCache.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\15.0\OfficeFileCache.
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Error when attempting to IMPORT object "TS_CHECK".

    When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
    The following short dump occurs:
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          19.11.2008 15:14:08
    Short text
    Error when attempting to IMPORT object "TS_CHECK".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTD4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
    by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "TS_CHECK", the component no. 4 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLSTD4".
    The data type is "I" in the dataset, but "N" in the program.
    Missing RAISING Clause in Interface
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Trigger Location of Exception
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     51
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Source Code Extract
    Line
    SourceCde
    21
    DATA: BEGIN OF TD110.
    22
    INCLUDE STRUCTURE TD110_STRU.
    23
    DATA: END OF TD110.
    24
    25
    CURR_TIME = SY-UZEIT.
    26
    CURR_DATE = SY-DATUM.
    27
    28
    CALL FUNCTION 'GET_DB_ORA_RELEASE'
    29
    IMPORTING
    30
    ORACLE_RELEASE = ORA_REL.
    31
    32
    IF FLAG_REFRESH = 'y'.  FLAG_REFRESH = 'Y'. ENDIF.
    33
    flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
    34
    35
    CLEAR TS_CHECK. REFRESH TS_CHECK.
    36
    CLEAR CRITOBJ. REFRESH CRITOBJ.
    37
    CLEAR NR_CRIT_OBJ.
    38
    39
    IF FLAG_REFRESH <> 'Y'.
    40
    41
    Suche zunächst im Arbeitsspeicher !
    42
    CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
    43
    IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
    44
    TS_CHECK[] = TS_CHECK_CACHE[].
    45
    CRITOBJ[] = CRITOBJ_CACHE[].
    46
    OK_1 = 'Y'.
    47
    48
    Suche danach in 'MONI' !
    49
    ELSE.
    50
    PERFORM PREPARE_MONIKEY USING 2.
    >>>>>
    IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
    52
    53
    IF SY-SUBRC = 0.
    54
    OK_1 = 'Y'.
    55
    TS_CHECK_CACHE[] = TS_CHECK[].
    56
    CRITOBJ_CACHE[] = CRITOBJ[].
    57
    ENDIF.
    58
    ENDIF.
    59
    60
    'Same procedure' für datetime:
    61
    IF NOT ( TD110_CACHE IS INITIAL ).
    62
    DATETIME-MONI_DATE = TD110_CACHE-DATUM.
    63
    DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
    64
    ELSE.
    65
    PERFORM PREPARE_MONIKEY USING 3.
    66
    IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
    67
    IF SY-SUBRC = 0.
    68
    DATETIME-MONI_DATE = TD110-DATUM.
    69
    DATETIME-MONI_TIME = TD110-UZEIT.
    70
    TD110_CACHE = TD110.
    Only related SDN post is following, but solved by changing permissions for saposcol.
    Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
    For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
    Thanks in advance for any assistance.
    KR
    Gidion

    Received the solution from SAP Active Global Support:
    This error occurs due a corruption in the table MONI.
    For solving this issue you need to clean the records of this table via the following path :
    1. Call transaction ST03
    2. With GOTO -> Performance database -> Content of database
    3. Push button Delete data group
    4. Enter ID DB
    5. Continue
    6. Confirm the delete
    If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
    Regards,
    Gidion

  • When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

    please someone who help me please
    when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

    You need to help us first ...
    Computer specs:
    OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
    Program specs:
    Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
    Footage file type: MXF, AVCHD, MOV, m2s, what?
    Even the camera it was shot on can be of interest at times.
    And did you use media browser to import, then project panel to drag & drop?
    Neil

Maybe you are looking for

  • Some Apps don´t appear in my apple tv

    Have two apple tvs in my home, one displays VEVO, HBO GO and other apps, but the second one, which I recently installed and updated, doesn´t have those apps. Why is this? How can I solve it?

  • My Bill Increased, Promised it would go back down by representative

    I called last month when my bill jumped up $40. I talked to a representative who was very nice and told me my bill was able to go back down to what I was paying. I go and look at my bill for this month and it is $30 higher than she told me it would b

  • Error message : No order corresponds to selection criteria

    Hi,    I am using T code CN24N for scheduling networks for a project and entering Project as the input. But I am getting the error: No order corresponds to selection criteria networks are there for the selected Project. Can anyone tell me the possibl

  • How to restore files from Carbonite

    My computer crashed and I had to reinstall my software. I previously had not backed things up on Mozbackup, but Carbonite backed my files up. now, can you tell me the procedure to restore my addresses and other files from carbonite's backup?

  • Why there is not decline button in 4S after upgraded to iOS7

    In iOS6, the "Decline" button was there along with "Remind me", "Reply with Message" and "Accept". After upgrading my iPhone 4S with iOS7, the "Decline" is missing. Do you have any idea to get it back or its a bug in iOS7 Thanks, J Ayyappaswami.