I am receiving mail on my home network,but not at work
i am able to receive email at home, but not when i am connected to my office network.
Most likely, you have a POP account, and your home computer is deleting the mail from the server after retrieving it. Check the settings. An IMAP account is more suitable if you want to access mail from more than one device.
Another possibility is that your email provider is your home ISP, and it doesn't allow access from outside its own network.
Similar Messages
-
Receiving mail through AT&T 3G but not able to send
I can receive all my mail on iphone through AT&T 3G but I cannot send, can anyone help me.
That's one option. Another is to use AT&T's outgoing mail server to send from that account. You can enable that in Settings > Mail, Contacts, Calendar > tap insight account > Outgoing Mail Server/SMTP > set AT&T SMTP server to ON. That way, the AT&T server will be used away from home (as long as you're connected to 3G/EDGE/GPRS - if you're connected to another Wi-Fi network it won't work) and your ISPs server will be used at home.
-
Mail.03 will download received mail from Gmai uising pop but not sent mail
After upgrading to Leonard, I decided to reconfigure my gmail with Mail.03 (hopping to eliminate the non sound issue when new mail arrives. Prior to this Gmail downloaded all received and sent mail. After, only received mail is downloaded but sent mail is No not. (Nor can I successfully send mail using Mail 0.3 through gmail.
I tried setting up an imap account and could not download any sent or received items.Hi Hector.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Move any “IMAP-” or “Mac-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder. -
Using my LinkSys WRT54G as a router in a home network, but not as the Gateway of the same?
Greetings,
I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.
Any pointers will be appreciated because so far, my efforts have failed.
Jean-PIerreThere are two (2) ways to cascade a Linksys router to another router:
1. LAN to LAN – Connecting one of the Ethernet ports (LAN ports) of the Linksys router (router A) to one of the Ethernet ports (LAN ports) of another router (router B).
This type of cascading requires the main and the secondary router to be on the same LAN IP segment to allow the computers and other devices to connect to both routers. This configuration is recommended if you want to share files and resources within the network.
2. LAN to WAN – Connecting one of the Ethernet ports (LAN ports) of router A to the Internet port (WAN port) of router B.
This type of cascading requires the main router and the secondary router to have different IP addresses. This connection makes it easier to identify which router the computers and other devices in the network are connected to since they will have different LAN IP segments. However, computers that are connected to router A will not be able to communicate with router B, and vice versa since they are two different networks.
Here is the link for same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=d4bfc9fde5284a4b845c9057ffbeb644_4735.xml&pid=80&r... -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
My printers works fine on my home network but disappears on a remote desktop terminal connection
As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style. Here is the question to the above answer. Well close enough.
Many people have reported all over the net issues with printers working just fine on their home network but disappearing when they connect to a server via RDT. There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment. There are Mr. Fix it's for those and registry patches. When all of that fails, the information highway seems to dead end.
Here is what I learned today via 2 specific printers: HP1022 and HP2840 lasjerjets.
After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style. Here is the question to the above answer. Well close enough.
Many people have reported all over the net issues with printers working just fine on their home network but disappearing when they connect to a server via RDT. There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment. There are Mr. Fix it's for those and registry patches. When all of that fails, the information highway seems to dead end.
Here is what I learned today via 2 specific printers: HP1022 and HP2840 lasjerjets.
After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router. -
I cannot send or forward email but I do receive mail OK. All of the same settings work on my wife's IPhone and our Ipad. All are running on IOS 5.0.1. I get a message of your email has been put in your outbox because the receipent "%@" does not allow relaying.
Try deleting the mail account and setting it back up again.
-
I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.
Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio -
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
Why doesn't Firefox Sync work in my home network, but at work?
Firefox Sync on my laptop does not work when my laptop is connected to my home network, but e.g. if I'm at my office.
The internet connection at my home is fine, I can surf the web with that very Firefox on both IPv4 and IPv6, DNS etc. is also working. Logging in to accounts.firefox.com also works, as does connecting Firefox to the Sync account. Only the process of syncing itself fails. On my desktop computer at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that sync runs on that server, so apparently the network path between my computer and that server is free.
Upon investigation with Wireshark, I see the successful TLS handshake, then some packets from the client that are not answered and after some time the server closes the connection (Encrypted Alert). Apparently, no content is transferred between client and server. I attach a screenshot of how Wireshark sees the conversation between server and client (The image upload here didn't work so I put it on the web: http://ibin.co/1zXABHKdj5mA).
To exclude a possible misconfiguration or bad add-on, I created a clean new Firefox profile and connected it to my Firefox account, but this shows exactly the same problems.
Fun fact: Firefox on my Android phone does sync in my home network.
Below, I will link two log files, one successful sync (office network) and one failed sync (home network):
Sync @ office: http://pastebin.com/rZmfrbdL
Sync @ home: http://pastebin.com/a3KUCevJAny chance you are on a DS-Lite network at home? If so, what's your ISP? The home network symptoms look a little like https://bugzil.la/1118958
-
Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet. -
Unable to access website using home network but able to access using school network.
Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
Any suggestions?Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I can receive mail on my mac account, but I can't send mail. What should I do?
I can receive mail on my mac account, but I can't send mail. What should I do?
Hello, sounds like you haven't switched to iCloud yet, the old dot Mac & MobileMe servers are going away or gone for most already.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
Hi
I just got new router and had to reset my network settings on IPad. Since then, my ipad will connect onto the main home network but will not attach to my extension booster (netgear) which is linked to the home network. It will also not attach to networks outside my home that it has previously worked with. i have reset the settings again, powered off and on again, updated to the latest IOS update, but nothing is working. Please help, as I can only use wifi in a few rooms in my house and i do not have 3G on my my ipad.Did you try forgetting the network and starting all over again?
Settings>WiFi>Network Name>Tap the blue arrow>Forget this Network. Restart your iPad and then try joining again.
Try rebooting your router. Even though everything else may be connecting to your Network, it might help with the iPad. Unplug the router for about 30 seconds and then plug it in again.
Reset Network settings on the iPad?
Settings>>General>Reset>Reset Network Settings. You will have to start all over again, Tap WiFi in the settings, find your network and enter the password.
Maybe you are looking for
-
Hi Exeperts, We are planning the project in networks and also in CJ40 -overall Values in WBS,But when I see the strcture report CN41,I'm able to see only cost planned innetwork.The cost planning done in WBS in CJ40 is not at all appearing. Also in R
-
FOR XML to generate dynamic script to drop multiple tables
Log_Table has a column named Col1 where we have table names Col1 TableA1 TableA2 TableA3 TableB1 TableC1 TableC2 Generate dynamic script to drop tables that are in Log_Table and starts with TableA. Instead of using the loop, use For XML
-
WHERE DATE QUERY Problem. Need Help.
Hi, I have a problem doing a query on the clause where. I want to filter all the data on my table with a date filtering, I just want to show all the data with Date bigger than where specification. This is what I do. Select * from Table where DateLoca
-
Link from safari direct in iMail
Safari is going through Outlooked (install 2 Moth ago; but would like to send link from Safari direkt through Mail program?
-
I have correct version, still have problems
I have the correct version of Flash Player (11.7.700.224 for windows xp/firefox). Still, certain you tube videos give me a black screen and a message to install the correct version of Flash Player - over and over. How can I correct this?