I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem
I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem and I am not running any similar program.
yes, photoshop.
Col. 3:17
Sam Collins
Similar Messages
-
running parallels with windows xp and OS X Lion. Trying to upgrade my Quickbooks on the windows side to the new 2013 version. The windows side does not even recognize the disc. What am I doing wrong?
S that QB edition is only for windows 8. It won't run on any earlier version of windows.
Looking at the QB 2013 system requirement it runs on XP.
http://support.quickbooks.intuit.com/support/articles/INF21187
So the version of windows is not your problem. Your problem is the virtual machine is not se to use the mac dvd drive. Have you looking into the machine settings. Not windows settings, the virtual machine settings. Make sure it is set to connect the mac dvd drive to the virtual machine.
A good place to start would be the parallels help system. Not the windows help system. -
Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7
Windows Movie Maker can't start. Dell XPS L502X running 64 bit Windows 7
Used to work fine until we updated MS licence. Seems to be a problem with graphics driver, yet I've tried all the posted fixes with no luck.Hi,
Due to Windows Movie Maker is an additional application, you can reinstall it for repair.
Alex Zhao
TechNet Community Support -
How can I run java in Window XP?
Hi, all;
Since MS didn't support JVM in window XP, do anyone have any idea to run java in Window XP? Thanks for helps.Hi, all;
Since MS didn't support JVM in window XP, do
, do anyone have any idea to run java in Window XP?
Thanks for helps.The MS version of Java was not up to date, and for most purposes (like using in Java 2 technology) you have had to download a Sun or IBM JVM anyway. The fact that Microsoft doesn't have a JVM is fine with me save the lack of a JVM in IE 6.x.
Chuck -
Can Crystal Server 2011 run on a Windows 2012, R2 server?
Hey,
I purchased Crystal Server 2011 in April 2013. Unfortunately, due to a heavy workload I'm just now ready to install it in a test environment. Will Crystal Server 2011 run on a Windows 2012, R2 server?If you update your CR Server to SP 5, then yest, it is supported on WIN 2012.
See the PAM.
To get SP5 you will have to loin to the SAP Market Service Place.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada -
I have windows xp sp3, run Mcaffee security software- when I open I-Tunes it does open however it will not connet to the I-Tunes store. I-Tunes diagnostic indicates that it does connect to the internet but the secure ling to I-Tunes fails. I-Tunes diagnostic attached. Hope some one can help. Microsoft Windows XP Professional Service Pack 3 (Build 2600) Dell Inc. MP061 iTunes 11.0.2.26 QuickTime 7.7.3 FairPlay 2.3.31 Apple Application Support 2.3.3 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 6.1.0.13 Apple Mobile Device Driver 1.64.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.6.502 Gracenote MusicID 1.9.6.115 Gracenote Submit 1.9.6.143 Gracenote DSP 1.9.6.45 iTunes Serial Number 0012B5500B576CC8 Current user is an administrator. The current local date and time is 2013-04-28 10:27:11. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information ATI Mobility Radeon X1400 **** External Plug-ins Information **** No external plug-ins installed. iPodService 11.0.2.26 is currently running. iTunesHelper 11.0.2.26 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {7282B8D2-078A-4414-82D6-A506F9C935D0} Description: WiMAX Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 255.255.255.255 Lease Obtained: Wed Feb 13 12:30:29 2013 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {9CE46F79-8015-4C15-A074-B1ACA4388E56} Description: Sierra Wireless Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {1A876FC9-50B6-4101-8E4F-838AF1D1CB32} Description: Dell Wireless 1390 WLAN Mini-Card - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {E64A2DD8-7A18-4784-8DC0-08B143E504A7} Description: Broadcom 440x 10/100 Integrated Controller - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 10.0.40.20 Lease Obtained: Thu Aug 23 15:54:15 2012 Lease Expires: Thu Aug 23 17:54:15 2012 DNS Servers: Adapter Name: {2A9F97F5-D693-427F-BA40-9C3AA36937B1} Description: WAN (PPP/SLIP) Interface IP Address: 107.42.83.109 Subnet Mask: 255.255.255.255 Default Gateway: 107.42.83.109 DHCP Enabled: No DHCP Server: Lease Obtained: Wed Dec 31 18:00:00 1969 Lease Expires: Wed Dec 31 18:00:00 1969 DNS Servers: 66.1.77.7 68.29.73.7 Active Connection: Mobile Connected: Yes Online: Yes Using Modem: Yes Using LAN: No Using Proxy: No Firewall Information Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was unsuccessful. The network connection timed out. Basic connection to the store failed. The network connection timed out. Connection attempt to Gracenote server was successful. The network connection timed out. Last successful iTunes Store access was 2013-04-16 10:14:47.
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Is there a way of running cd's"windows" formatted with inf and swf files?
Is there a way of opening and running CD's 'window' formatted with .inf and .swf files on a mac??
In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
-
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Problem to run executable in windows 7 64.
I developed an application using labview 8.5. Created an executable from it.
In windows XP i installed the labview runtime engine 8.5 and visa runtime and my EXE worked fine.
Tried the same on windows 7 64 and my application hangs the PC, tried the latest visa runtime with no success.
I basically uses a serial port (com 1) to comunicate witha device.
Tried to run it as windows xp compatible, same problem.
Any ideas?Thanks for the reply.
Here is my setup:
the runtime for labview - LabVIEW85RuntimeEngineFull.exe
the visa runtime - visa501runtime.exe
and windows 7 64
The application was developed on labview 8.5
According to this URL (http://zone.ni.com/devzone/cda/tut/p/id/10383), the minimum versios of VISA is 4.6.
And checking your FAQ link i got this:
Q. Can I run an executable built with LabVIEW 32-bit on a 64-bit PC?
A. Windows can run 32-bit executables on a 64-bit PC. Therefore, the LabVIEW 32-bit Development System, Run-Time Engine, and executables can be run on Windows 64-bit.
I can send the file, its a stand alone executable, just click and run, no installation required. -
How can I run 2 Dreamweaver windows at the same time?
How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
MauriceOpen the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
> -
Full Steps to run CS3 in Windows 7
How to run CS3 in Windows 7....Full Steps
How to work with old software in Windows 7 Ultimate.....(That is the software that I used for Adobe CS3 and it worked beautifully. Other versions may be slightly different, but in general, the same steps apply.)
Note: This is written with the issue of Windows 7 will not run software designed for XP or Vista.
What you will need:
If you have Windows7 Home or Home Premium, you MUST upgrade to Windows 7 Professional, or Windows 7 Ultimate or Windows 7 Enterprise.
Otherwise, you will be wasting your time and money trying to figure out how to do it with other processes.
If you need a good software to partition your hard drive, to run other types of operating systems, I recommend Paragon Partition Manager 10.0 Professional, but for Windows 7, you will not need it.
What you will need, after upgrading your computer and operating system to the one's listed above is two downloads from Microsoft.
The first download: XP Mode Software
The second download: Virtual PC Software
This link and address will take to you to Microsoft to first run a system check to see if your software and hardware are compatible and able to run the additional needed software.
http://www.microsoft.com/windows/virtual-pc/download.aspx
This page will run the needed test to see if your system is compatible to run the next steps.
Once your computer passes the compatibility tests, it will then present you with two links to download the necessary software for Windows 7 to operate in XP Mode for your older software.
Installation:
Download and install 1st: XP Mode
Download and install 2nd: Virtual PC
Once installed, restart your computer and if needed, you will need to get into the BIOS to turn on Virtualization Technology.
This next step is based on the HP Pavillion Elite e9260f PC. Your system may be different, but these instructions will follow based on the system above and Windows 7 Ultimate.
On the first start up page, you have options at the bottom to get into the BIOS.....F10 is the option to stop startup and enter the BIOS.
Move over to Power Options and you'll see Virtualization Technology.
Arrow down to that setting and hit Enter. A small window will open with Disable and Enable.
Choose Enable and then F10 to save and exit.
Then let the computer go through the start up process again, all the way to Windows Desktop.
Once you are up and running, Go to Programs through the Start button.
Click the folder named: Virtual PC
Then click on : XP Mode to finish setting up. (this process is literally setting up an XP Operating system, so follow the instructions it offers carefully.)
Once the setup is complete, you will be given a User Name and a choice of a password. With this mode, you must enter a password.
The next window to appear will be for XP Updates. Turn that on for a very smooth setup for the rest of the process.
Once this is done, then you will see the setup process taking place.
When XP Mode finishes installing, it will ask about the settings for Virus Protection, just click that you will manage the virus protection yourself.
Then, you are set up with XP and are now able to install Adobe CS3 software and other to work with.
The internet works with the XP Mode desktop, but virus protection is possibly not enabled on the XP Mode, so I recommend not using the internet through XP Mode to search the web. Use Windows 7 for that.
When setting up CS3, disable your antivirus software to prevent any conflicts while loading.
Put your CS3 disk in the disk drive and instead of letting it run automatically in Windows 7, on the Start button of XP Mode, go to and click RUN.
Click Browse for the DVD-CD and then Explore the disk for the Autorun file.
Then you will be presented with the Adobe install window and just follow the instructions for Adobe from there.
It may ask for the RAM to be at a minimum of 1GB. Just ignore this for now and you can make adjustments later, within the software.
Once Adobe CS3 has finished loading, it will may ask for a restart.
Close the XP Mode Window at the X and it will then say, "Going into Hibernate."
Do a shutdown or restart in Windows 7 and then go to Programs and choose, Virtual PC, click on XP Mode and it will then open the XP mode again.
Go to the Start button to Programs, Choose your Adobe CS3 program and go to work!!
You're Done!!!
All old software that you were working with before, will operate the very same as it did when it was on a straight XP or Vista computer.
Hope this helps and after finally getting all this information, which did not come with my new computer, it was a VERY SMOOTH transition.
Enjoy!!! and you are welcome....
The Cajun LadyI don't quite understand your question....The issue before was that Photoshop CS3 will not run
in Windows 7 as a stand alone program, making it necessary to have Windows XP Mode to run it.
They said here at Adobe that the CS4 upgrade and stand alone software was designed to run in Windows 7, but CS3 was not and would not be changed, that the only option was to upgrade to CS4.
I felt that was a little unfair to the one's that got CS3 in the past year and from what I understand, CS5 will be coming out soon.
This doesn't particularly apply to Adobe, but to other software as well. I had read that iTunes will not work in windows 7 and has to have XP Mode to run. There was an issue that I read in a forum about the "Bonjour" file had a conflict with the systems folders and I experienced the issue of it causing my registry to drop out with each shutdown.
Once removed, drivers and software had to be reinstalled and activated, only to have it do it again for the required shutdowns during setup.
Once I upgraded to Windows 7 Ultimate, and removing Bonjour from the system, the problem went away and I haven't had to reinstall anything since.
So that is something to also think about, before trying to upload any software that is related to Apple/Mac on the Windows 7 platform. If it has to use the Bonjour file, you will be much better off to upload directly to XP Mode instead, as there are no issues with XP.
Basically, it's a "trial and error" process to see what works and what won't within Windows 7. All the information is brand new to me and so I'm still asking questions myself.
Thanks for asking. -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!
Maybe you are looking for
-
Hi everyone, I'm working on a 2.26GHz MacPro with 12GBs of RAM. Notable installed software includes Adobe Master Collection and Final Cut Pro. I have 3 (standard) Nvidia GeForce GT 120 graphics cards. I also have three 27" cinema displays, one for
-
Saving PDF as Word .doc or .rtf portrait landscape weirdness
Hello all, I have a PDF that was originally created in Word (by someone, not sure who) and I have been asked to modify the text a bit. I began doing that in Acrobat 7.0.9 - but kept running into font encoding issues, and I'm almost dangerously cluele
-
How to send screen shots from IM?
Hi, Is there a way to send screen shots through IM? Like copy and paste? I used IBM's Sametime earlier which allowed to send screen shots through the IM. Can you please tell me how to send it through Lync? I know how to send the files, but I just wan
-
i do i get bluetooth on my imac if is not already on here...
-
Could an A5200 storage support bigger disk to 73GB ?