I am running on Windows 7 and my close tabs are blacked out??

The tab in the upper right-hand corner of the page is blacked out. This is the tab to
close Firefox. When I click in the black box where the close button should be; it closes.

Note black rectangle in upper right-hand corner.

Similar Messages

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

'''''thedanbot''''':
I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

You might want to post this over in the iTunes Match forum.

I bought a new Windows 7 computer. I currently have Lightroom 3.6. Will this run on WIndows 7 and how do I download it onto my new computer?

I bought a new Windows 7 computer. I currently have Lightroom 3.6 on the old computer. Will this run on Windows 7 and how do I download it to the new computer?

Yes, Lightroom 3.6 runs on Windows 7
Go to Google, type in:
Lightroom 3.6 Download Windows

When I have the downloads window open and I close the browser window, how can I get the browser to open the homepage the next time I start it while the download window is still open?

When I have the downloads window open and I close the browser window, the next time I reopen the browser while the downloads are still going, it returns me to the last page I was on. All previous versions of Firefox would return me to my homepage which I would prefer. Please let me know if this is possible.

When you re-open Firefox and choose Restore Session, by default it picks up your most-recently-open window, and the other windows should then show up in Recently Closed Windows.
The Firefox add-on Session Manager lets you manage how many closed windows and closed tabs are saved, in case it's not enough.

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?

I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?

Here is a recent post I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open, modify and save your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Trying to print a book with Aperture 2.1.4, everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window.

everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

New session started with an advertizing page and all my tabs are lost

New session started with an advertizing page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

This advice might come too late, but, don't exit Firefox! Or if you already did, don't start it back up again!
''If Firefox is running:'' Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window listed various files and folders. For best results, change the view to "Details".
(''If Firefox not running, get to this folder by pasting the following in the Run box on the start menu and pressing Enter: %APPDATA%\Mozilla\Firefox\Profiles and then double-click into the most recently updated semi-randomly-named folder you find there.'')
In the window that launches, scroll down and double-click into the '''sessionstore-backups''' folder. Save all files here to a safe location, such as your Documents folder, so Firefox doesn't overwrite them. We may be able to use them to recover your lost tabs.
Also, if you return to the main level of the profile folder, you may find some sessionstore files. Copy those to the safe location as well.
Could you report back on what you found?
Note: If Windows hides the .js file extension from you, you can change a setting so that you can see all file extensions (this helps when renaming files). This support article has the steps: http://support.microsoft.com/kb/865219 or http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
The kinds of files you may find among your sessionstore-backup files are:
* recovery.js: the windows and tabs in your currently live Firefox session (or, if Firefox is closed, your last session)
* recovery.bak: a backup copy of recovery.js
* previous.js: the windows and tabs in your last Firefox session
* upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Firefox 12 is very slow to load pages and if two tabs are opening it lags.

Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

I have the exact same problem.
Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
Something is wrong with Firefox 12, it shouldn't be this slow.
How is that each version is progressively worse than the one before it?.
Stop releasing so many versions Mozilla, release one that works and build from there.

I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs mem

I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

HT5167 Why is it using 5.1.6 I can no longer enter ID's and passwords in my secure accounts-the spaces are blacked out?

Why is it using 5.1.6 I can no longer enter ID's and passwords in my secure accounts-the spaces are blacked out? I can use Firefox.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

I have made a swirl, but the allign stroke inside, and allign stroke outside are greyed out. Why? And how can I fix it?

I have made a swirl, but the allign stroke inside, and allign stroke outside are greyed out. Why? And how can I fix it?

Thank you, that kind of explains the why. Is there a how? Meaning is there a workaround? Basicly I have two strokes. One white thin stroke on the path (black background), Now I want my second stroke (which is a blue gradient) to start from the path and continue inward, as if it was "alligned innside"

I am running on Windows 7 and my close tabs are blacked out??

Similar Messages

Maybe you are looking for