I am running OS X 10.8.5, recently upgraded.

Now my iMac does a soft crash when it auto sleeps, and requires a hard restart.  The Calander icon also goes transparent and you just see the icon name as part of the symptoms.  Any one else have that issue?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

    I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
    The version of SharePoint foundation running on the server is more recent than the version  of SPD you are using, you need a more recent version of SPD.
    These are the ways I tried
    1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
    2) I uninstalled restarted my machine and installed it again still no use.
    3) I installed SPD 2010 Service Pack 2 of 64 bit
    4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
    How to solve this issue?
    I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

    Please update us SharePoint version 
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • I have a IMac G5 A1058 that was running Mac OS 10.3.8 I upgraded to 10.4

    I have a IMac G5 A1058 that was running Mac OS 10.3.8 I upgraded to 10.4, shortly after upgrading the system would no longer boot so I booted from the 10.4 Tiger upgrade disk from which I had upgraded and disk utility found errors on the HD file system  that it said could not be repaired. I removed the HD from the system and connected it to my other IMac G5 A1312and ran disk utility and found the same errros. I re partitioned the HD put it back into the G5 and atempted to reinstall the OS. I keep getting a grey screen with a circle and a line through it.It does this with OS 10.2 and 10.3 when I tried 10.4 tiger upgrade it says it need their to be a system all ready installed. My Q's is do I need Mac OS 10.3.8 disks since that is the system that this computer was released with?
    Any idea why it will not let me install 10.3 and work my way up?
    Any help would be great thanks

    Welcome to Apple Communities
    If it came with Mac OS 10.3.8, you can't install an early version. You need the discs with it

  • How do i turn off apps running in the background with the new upgrade?

    how do i turn off apps running in the background with the new upgrade?

    They changed it a bit, but you can still close apps. Double click the Home button to pull up the currently running apps. Side scroll over to the app you want to close, then swipe up on the app *window* (not the icon at the bottom).
    = L.I.

  • Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup

    Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup. How do I ensure I get all my photos etc onto new phone?
    Thanks

    If you're old phone that was repalced was a higher version of iOS, it wont be able to restore. Update your iPhone to the lastest iOS 7.0.4 and try to restore it then.

  • I've recently upgraded to OS 10.6.8 and now can't get my Corel Painter IX to run.

    :II've recently upgraded to OS 10.6.8 on my desktop and have had to reinstall all my software programs. I can't seem to get my Corel Painter IX to run. It appeared to install correcly and will open momemtarily, but then stops the process and shuts down. I've searched the Corel help site and can't seem to find any help. Anybody else encounter this issue? I know it's an old version and I should upgrade, but this version suits my needs and I honestly don't have an extra $199 to upgrade. Any help is appreciated. Thank you in advance.
    Terri Shaver
    Mid-Michigan
    Message was edited by: shavert

    That version will not run on 10.6. The new X3 does. Contact Corel to see about an upgrade.

  • I have Adobe Acrobat Pro 9 version 9.5.2 running on my mac. I recently reinstalled my mac from a bac

    I have Adobe Acrobat Pro 9 version 9.5.2 running on my mac. I recently reinstalled my mac from a backup and now Acrobat will not update. Thanks Glyn.

    Hi  GlynIC,
    What exactly is happening when you try to update.
    How are you trying to update it, using patch or doing a check for update from application itself.

  • I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have be

    I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
    == This happened ==
    A few times a week
    == Upgraded to 3.6.3.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Help required in running SPAU and SPDD transactions for post upgrade

    Hi All,
    We are doing a system upgrade to EHP1.
    We need help in SPAU and SPDD runs and why are they required in upgrade activity.
    Kindly respond.
    Thanks in advance
    Regards
    Rashmi

    Hi Rashmi,
    SPDD and SPAU are modification adjustments that you need to adjust after upgrade. This is a situation where the upgrade has to enhance some structures and elements that was available in previous version (probably 3.x). The system can not determine whether to overwrite the structures or to retain the old version. If the structures are custom structures, the system might overwrite any enhancements that you have done. In this kind of situations, the system puts any such structures and elements that it can not make a decision into these 2 lists. SPDD is for dictionary objects and SPAU is for configurations. You have to fix all the issues that are produced in these transactions. You need to first fix the ones in SPDD list and then the SPAU list. Once you drill down in those lists, it asks you to take actions like "change it", "keep the old version" or "ignore the changes" (I think these are the options). You need to chosse these options based on your analysis and turn all the yellow and red ones into green. Hope this gives you some idea.
    Thanks and Regards
    Subray Hegde

  • My pic 3 has suddenly started draining the battery in only a few hours even when I am not using it. Might this mean something is running all the time? I recently downloaded Dropbox. How do I check? What do I do about it? Or is battery faulty? Tim

    My ipad 3 has suddenly started draining battery in only a few hours. Even if not in use. Might this be because a programme is running in he background? I recently downloaded Dropbox. Might my photos still be downloading after a few days? How do I check? What do I do about it? Or might my battery be faulty? Thanks, Tim.

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon.  The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A."  The symbol between volts and amps is the symbol for DC.  Do NOT use an iPhone charger.  Do NOT use an iPod charger.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.
    According to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

    Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

    Since iPLM failed to help try the following:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please t

    Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please try again. If it continues to fail contact adobe support. Please assist me asap, i need this working ASAP as i specially purchased for immediate use.. thanks:)

    No, there was no option for enter the serial number, which i gather u mean by S/N?

  • I recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in notebook trying to record.

    i recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
    Also, I feel that it overheats often and my battery runs out pretty quickly.  I had the macbook (black) and this never happened before.  I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

    This is exactly what keeps happening to mine too.  I was at a conference taking notes, and I was
    using the Notebook template, and doing some audio recording simultaneously.  About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working.  However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it). 
    Does the crash happen to you under similar cirucumstances?  The update might help a little, but it is definitely not the solution.  Does anyone have any solutions?  Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

  • I'm running Snow Leopard, do I have to upgrade to maverick or can I just upgrade to the new one?

    I'm running Snow Leopard, do I have to upgrade to maverick or can I just upgrade to the new one?

    If your Mac's compatible with Yosemite, you can upgrade directly to it.
    (116191)

Maybe you are looking for