I am running OSx 10.7.5 on 2008 MacBook is it possible to run 10.8.?

So early white is a no.
I'm afraid so. The tech specs for Mountain Lion and Mavericks are the same.

Similar Messages

HT201475 I am currently running OSX 10.6.8 on my MacBook Pro. Can I upgrade straight to Yosemite and if I can what issues will I face?

I am currently running OSX 10.6.8 on my MacBook Pro. Can I upgrade straight to Yosemite and if I can what issues will I face?

1. It depends on what Mac model you have. If it's incapable of running Yosemite, installing an intermediate version won't help with that.
2. You'll lose the ability to run PowerPC software, and some other programs may also be incompatible. If something goes wrong, you might lose data; back your computer up first. There aren't any issues specifically associated with skipping versions.
(119335)

I have a mid a Mid 2007 13-inch macbook running OSX 10.7.5 is this the latest software I can run on this machine?

I have a mid a Mid 2007 13-inch macbook running OSX 10.7.5 is this the latest software I can run on this machine?

Yes.

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

I have the same Macbook Pro as you. You should read this Apple page: http://www.apple.com/osx/how-to-upgrade/?cid=wwa-us-kwg-mac-com While you can install Yosmite, many cool features will not work on pre-2012 models, including: Handoff and Instant Hotspot, AirDrop, AirPlay Mirroring, Peer-to-Peer AirPlay and Power Nap. Additionally, if you have not already upgraded your iPhoto library from iPhoto 8.1.2 (as I have not), I believe you will need to purchase the upgrade after you install Yosemite based on what I read here: https://discussions.apple.com/thread/6602872 . Good luck! If you do or have proceeded with updating to Yosemite, please come back to this thread and share how the experience went. Thanks.

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

I am running OSX 10.7.5 on my Macbook Pro. I have iChat but not Messages. IS there some way to upgrade or download an app for Messages? Thank you!

Would like to get Messages on Macbook Pro OSX 10.7.5 so that I can sync with iMessages from my iPhone 3GS. Not sure if this is possible though. Or do you have to have Mountain Lion to get Messages? It seems that I only have iChat on my Macbook.
Thank you!!

You need to have Mountain Lion to get it.
(89065)

I've tried to run the update 3 times on my MacBook Pro - it never finishes running. Why?

A pop up keeps telling me to update Firefox. Three times I've tried and it just keeps trying to contact the server. Could this be caused my lousy internet service?

When you reopen Mail, immediately click on the Outbox, select the message and delete it. You can also try taking the account offline. If the spinning stops, delete the message.

I have a MacBook Pro 5,5 2.26 Ghz 2GB memory . Can I run OSX 10.7 . I am on 10.6.8 and am told software is up to date?

I would like to be able to run OSX 7 on my wife's MacBook Pro , as I have a new printer which required OSX7 or above.
Her Macbook Pro is Model MacBook Pro 5,5 2,26GHz speed and 2GB memory.
When I look for software updates I get the message that software is up to date.
Is it possible to run OSX7 on this Macbook Pro , and if so , how do I get it.
Many thanks , Sam

Open the Mac App Store and download Yosemite, or if you don't want to upgrade all the way immediately, click here and order a download code for Lion 10.7; codes for Mountain Lion are also available.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116492)

Can an intel iMac run OSX Tiger from an external hard drive?

Hi can anyone please tell me if it is possible to run OSX Tiger from an external hard drive on an Intel iMac running OSX 10.5 Leopard or later?
Or is it possible to partition the intel iMac's hard drive and add Tiger?
At the moment I am running Tiger on a partitioned hard drive shared with OSX Leopard and wish to upgrade to an intel Mac. I need tiger to run some software not compatible with newer Macs and also to access OS9 Classic. Thanx for your help.

IF you upgraded from Panther as you know you do not have an Intel based iMac. I beleive the limit of your upgrades on your current machine is going to be Leopard. The system requirements for Snow Leopard are:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply
This is straight from Apple so yes if you want to go beyond Leopard then you must purchase a new machine. My suggestion would be to begin replacing your legacy apps, you are extremely far behind and the longer you wait the more painful it will be to get current.
Good luck.

How can I upgrade to OSX Lion when I am running OSX 10.5.8?

I am currently running OSX 10.5.8 on my MacBook and have no idea how to upgrade to OSX Lion as I do not have Snow Leopard. Can anyone help? Thanks!

You can order a Snow Leopard 10.6 install disk for $29 as long as you have at least 1gb of RAM and 5gb of free space on your hard drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
Or you can wait until August when Apple will sell Lion on a USB Flash Drive for $69

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(116042)

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

My mid 2010 Macbook pro running OSX 10.8.4 sd card reader will not work

I have a Macbook Pro 13" mid 2010 model running OSX 10.8.4. I don't use the card reader very often so I can't tell you the last time it worked, but I have used it a few times without issue. (probably not for at least a year though)
I searched the forums and it seems this was an older problem with lots of suggested fixes. I tried blowing air through the slot and I also went looking for XQuartz but cannot find it under my utilities. (I assume it must be in the X11 category that is no longer supported under 10.8.4?)
I have tried putting it in all the way and pulling it out slightly as one person suggested and that also did not work.
Any ideas? For the first time in a long time I need the card slot and it doesn't feel like cooperating. LOL
edited to add that I am trying to access a Sony SDHC 32GB card model SF-32NX
Thanks in advance,
Wayne

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

I am running OSx 10.7.5 on 2008 MacBook is it possible to run 10.8.?

Similar Messages

Maybe you are looking for