I am running Photoshop CC on a Windows 7 Toshiba PC and my text will not appear on the background when I type it.

I am running Photoshop CC on a Toshiba laptop running Windows 7. When ever I try to type text on a background image, the words don't appear. NOW...I had been using it for two or three weeks with no problems whatsoever...but then about 5 days ago, it just quit working. What I type shows up on a the layer pallet on a tab in the lower left corner of the screen, but it just won't show up on the graphic. HELP!!! I'm about ready to cancel my monthly subscription to Photoshop!! I tried to reset my text "T" in the upper right corner, but I think I made things worse.
Can I delete the program from my computer and REdownload it??? I've got things I've GOT to get done and I'm dead in the damn water and I can't seem to get any help. I will tell you up front, I am NOT a computer genius, so any help will be GREATLY appreciated and if you could put it into step by step parts that would GREATLY help me. I appreciate it.

Thanks for the screenshot. You do not have to get rid of CC 2014.
Open your Creative cloud panel, select Previous versions and 14.0 under Photoshop.

Similar Messages

My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

my itunes on a windows 7 pc with dsl connection will not connect with the itunes store. Any suggestions about why not or how to get it to connect?

After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013.
The only clue is that "bootstrap loader error" ...
It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
Windows clean boot mode.
Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
http://support.microsoft.com/kb/826511/en-us
Tony Chen
TechNet Community Support

Just purchased Imac running Lion - doc. and cwk. extensions will not open . whats the fix?

just purchased Imac running Lion - doc. and cwk. extensions will not open. whats the fix?

Pages 4.3 is the most recent, but no matter. If Pages cannot open it, there are many other programs that may be able to. Some of them are free.
LibreOffice (donation-supported)
NeoOffice ($10 but older version is free if you can find it)
OpenOffice (completely free)
Try TextEdit also. It is included in OS X.
If you are trying to open the document by double-clicking it, don't, since the Finder may be looking for a program that is no longer installed. Use Pages' File > Open... menu. The same recommendation applies to using any of the above alternatives - use their File > Open menu.
The least attractive alternative is to purchase Microsoft Word, but I have been completely Microsoft-free since updating to Lion.

Windows 8.1 and officejet 6110xi - Will not print but scans okay?

Today Jan 5th, 2014 installed Windows 8.1 on my dell desktop.
Now the HP officejet 6110xi will not print.
The scan mode seems to work.
I have tried all of the HP work-a-rounds but no luck!

Hi kmwenman,
Is this issue happening on all 4 machine that you have installed the Officejet 8620 on?
Please download and install the HP Print and Scan Doctor and let me know the outcome of each test performed. Please run this on all of the computers the printer is installed on if the issue is occurring.
You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
Click here to download and run the utility > HP Print and Scan Doctor
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Do you have any other HP Printers installed on these computers? If so, do you still have the printer(s)?
Is this an HP laptop or a different brand?
Are all the computers running 8.1?
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Ff 26 just installed an update and now downloads do not appear in the download window.

I've tried several solutions recommended to people who had this problem in prior versions but none of them work. It does not matter whether I display downloads in a separate window or sidebar. The downloads are actually happening in the background (when I open windows explorer the file is listed in the folder) and the download window is there, but nothing about the file or its status appears in the window.
I use Download Manager Tweak 0.9.8 open in a sidebar but the problem persists when I have downloads open in a separate window.

I was using the add-on Download Manager Tweak 0.9.8 rather than the native FF download manager and just discovered that Tweak will not work with FF 26. The Tweak download window stays blank even if files are downloading. When I downloaded and re-installed FF 25.0.1 my downloads showed up in my download window again as they always did before the upgrade to FF 26.
Can the Mozilla FF team track down what caused this problem and correct it so that Tweak will work again or at least contact the provider of Tweak to try to find a fix?

Uninstall and reinstall hp7400 all in one to my windows xp computer and cd rom will not run

I have a HP 7410 All in one, I uninstalled the software, when I went to reinstall the cd-rom would not run. Do I need to update drivers. My operating system is Windows xp

Hi @Alex322,
Welcome to the HP Forums!
I see that you are trying to reinstall your HP Officejet 7410 on Windows XP, and that the CD will not run. I am happy to help you with this reinstallation issue!
I would recommend to download the software at this website, HP Officejet and Photosmart Full Feature Software and Drivers, and we will see what happens!
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Windows 10 Mail and Calendar app will not sync with Office365 account

I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
This topic first appeared in the Spiceworks Community

I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
This topic first appeared in the Spiceworks Community

Running Photoshop CS4 on a Windows Desktop PC and A MacBook?

Hello,
I have a quick question and would really appreciate any help
Last year I bought Photoshop CS4 for Windows and now I'm using it on a Vista desktop computer. When I understand the licence agreement well, I can also install it on a portable computer and use it for my work as long as I don't use it simultaneously on both machines.
Well, my portable computer is a MacBook Pro, running Snow Leopard.
My question: Can I use the software on both machines with the same license key? My plan is to download the mac-version of PS CS4 and use my licence key to activate it... Will this work or is it more complicated and I have to contact the customer service? Or do I need to purchase a new licence for my mac?
I hope you guys can help me - thanks in advance,
Frank

Oops!
I just foud the answer to my question in this forum.
For anyone who has the same question, see this link: http://forums.adobe.com/message/1652014#1652014
So I need a new licence
Frank

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

I have window xp professional and this browser will not open. I have removed it and downloaded it again and still it won't open.

I think an older version of Morilla Firefox in order for this work on my computer.

Right.
"Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears"
And I'd close all of the running Apps (double tap on the home button, press and hold app then tap red - sign in corner of listed apps). This probably seems very elementary, but like I indicated the issue you are describing seems so much like a memory issue.....if this isn't it, the issue you describe has me scratching my head
BTW, you don't have any issues with the touch screen, correct? It seems to be functioning normally except for the issue you describe?

TS3212 I am trying to install itunes on my pc and the run window will not appear. I changed the pop-up blocker settings and I still can't see it?

I am trying to install itunes for my pc and the run window will not come up and I have changed my pop-up blocker settings and it still will not appear.....help?

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

HT201413 i am using windows xp pro on a laptop, i access the internet thru a wireless connection, no problems. i start itunes and it will not connect to the internet

i am using windows xp pro on a laptop and have never had a problem accessing the internet, and still dont.
i purchased an iphone 4 and would like to sink it with my laptop, i installed itune 10.6 and it (itune) will not connest to the internet.
this can not be a hard problem to solve, but i need help
thanks

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

WIndows 7 and Server2008 machines will not remember network discovery preferences, requires setting every start up or wake up.

hello
I wondered if anybody here could be so kind as to help me solve this situation
i have two Windows 7 machines and Server2008 machines will not remember network discovery preferences,
i am running software on the windows server machine that collects data and serves information to two windows 7 machines, and network discovery is required for this purpose
these machines are configured in a local stand alone network configured as a workgroup the only other items on network are none PC based equipment that the server happily communicates with and reads data from
once the network discovery is set for the network the system runs as expected but on every start-up (or wake up) the network discovery is lost and need to be re allowed. this is the case in both windows server 20008 r2 and windows 7
how do i make these preferences permanent. so that it will restart and re establish communication its self without intervention
am i missing a setting or if not is there a way i can script the the selection of preference on each start(/wake)up.
the final user need to be able to turn system on/restart and use it with out having to have any IT/networking knowledge to get system running.
thank you for taking the time to read my query

You can use group policy to enable network discovery so that it is always configured
1. In the Group Policy editor on a Win7 or Windows Server 2008 R2 computer, open the GPO that you want
to use in the Group Policy Editor.
2. Expand "Computer Configuration", "Windows Settings", "Security Settings", "Windows Firewall with Advanced
Security", and then "Windows Firewall with Advanced Security - {policy you have open}".
3 Right-click "Inbound Rules", and then click "New Rule".
4 In the Rule Wizard, on the Rule Type page, select"Predefined", and then select Network Discovery from
the list. Click Next.
5 On the Predefined Rules page, ensure that the check box is on each rule that is part of the Network
Discovery group, and then click Next.
6 On the Action page, select "Allow the Connection", and then click Finish.

I have installed succesfully a PCI cards seen by windows but it does not appears in the device and interfaces tools of the Measurement and automation manager?

Cannot install new objects in device and interface to use the ni-imaq library and to take image from my camera.

Which PCI card did you install? The PCI-8252 and PXI-8252 will not appear in MAX. Does your card appear in the Windows Device Manager?

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am running Photoshop CC on a Windows 7 Toshiba PC and my text will not appear on the background when I type it.

Similar Messages

Maybe you are looking for