I am running Win 8.1 on bootcamp and cannot get sound from internal speaker

Do you have any unknown devices in Device Manager with a yellow triangle and exclamation mark?
Are the Bootcamp drivers installed?
You should something similar to the following for Sound Devices, if the drivers are installed.

Similar Messages

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

I have a Win home proffesional with Ie9 and cannot get to the itunes store. I keep getting this message"Itunes has stopped working.A problem caused the program to stop working correctly. I have deleted the program and re installed with the 64 bit download

I have deleted the program and re installed numours times, also ran a full essential scan, spybot and malware byte scans with no results. Any ideas?

Nobody has had or has this problem? I have gone back and forth with itunes "help" people for 2 weeks with no "help" at all. I guess I am going to have to buy a non apple devise and shop @ amazon for my music.

Bootcamp - Seems there is no Support for Windows 8.1 once it is loaded. Just got off the Microsoft Help line and they refused to help me because I was running Win 8.1 in Bootcamp. Where do I go for help?

Bootcamp - Seems there is no Support from Microsoft for Windows 8.1, once it is loaded.
I Just got off the Microsoft Technical Help line (Australia ph132058) and they refused to help me because I am running Win 8.1 in Bootcamp.
I have the latest Mac Book Pro Retina with a 1TB Solid State Hard drive running Win 8.1, beautiful machine, but its slower than my old MBP running windows 7 on a standard Drive.
The niggiling problem is that it seems to hang up for seven or 8 seconds on menial tasks........ like generating a new Folder or Note etc. Otherwise it runs reasonably well but not blindingly fast....
I wasn't aware Microsoft refused to help win 8.1 users on the Mac Platform........ shouldn't this Information be made more public...! Seems they are keen to drive potential Windows users away!!
Any suggestions on where I should go for help on this (Windows/Bootcamp in General) would be much appreciated ? ........ don't mind paying a reasonable price if the service is good......
I guess the wheel has turned and Microsoft are having a go at Apple again...?
Many thanks ....... Martin V

Thanks Turbostar.
I was thinking along the same lines. I installed Win 8.0 Pro and upgraded to 8.1 ........ probably a bad move.
I have bought a new 8.1 Licence but cant risk doing a complete reinstall until I have a back up machine ready. (My old MBP is getting a new hard drive) ......... so will give that a go in about a weeks time when the back up is in place. Cant risk having nothing!
When you say "Clean Install" ..... do you mean everything ..... as in Reformat the Bootcamp sector and start from scratch.?
I have a 2 TB LaCie Thunderbolt drive with my back up data on ..... is there a way to make the Reinstall process and large amount of Data transfer easy?
The reinstall is something I need to read up on. I was hoping the solution might be some kind of Tune up on the SSHD.
Good to hear you have a number of MBP's that are flying, I would be disappointed if the final quality wasnt a bit better.
..... do you have any tips on screen Res on the Retina ..... I am running Windows at 125% Zoom, but the Bluetooth, power, wireless, Date Icons etc are all still tiny ...... could really do with an alternative to the old "Advanced Appearance Settings"
cheers ..... Martin V

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

I run os x 10.4.11 and cannot download itunes for my ipad? what OS do i need?

i run os x 10.4.11 and cannot download itunes for my ipad? what OS do i need?

Which exact model iPad? It would almost certainly state system requirements on the packaging.
From http://www.apple.com/ipad/specs/ the current model requires at least 10.5.8

Have Reader 11.0.06 running on Mac OS 10.9 and cannot find Reader license agreement.

Have Reader 11.0.06 running on Mac OS 10.9 and cannot find Reader license agreement.

Open the Applications folder, double click on the Reader icon, and you should receive a prompt. Follow instructions.

I am trying to run a CDrom on my Mac, and I get the following message: bdf.classic or bdf.osx not supportebdf.classic or bdf.osx not supported d anymore. How can I fix this.

i am trying to run a CDrom on my MAC and I get the following message: bdf.classic or bdf.osx not supported anymore. How can I fix this and run my CDrom?

I don't think you can fix it. Those messages imply the programs on the CD are older ones for PowerPC Mac (discontinued in early 2006) and does not have the code a current Intel-based Mac requires.

My computer will only run CS3....where can i get this from?

My computer will only run CS3....where can i get this from?

Simon,
You may try to buy elsewhere. You may come across offers of new and unopened box sets, and used ones. There is quite a number of rules concerning the legality of taking over Adobe software from others, in some cases requiring a licence transfer.

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

I run Vista and cannot get my Officejet Pro 8500-A909a to set up

I originally had my 8500 running correctly. One day, in June, I suddenly noticed that when I attempted to scan using the keys on the printer, my computer was not on the list of computers attached to my printer. I did a search of the issue and was told to re-install the software. When I attempted to re-install, I could not get my computer to see that the usb cable is connected. If I download the drivers only, I can get them to load, but the full suite of capabilities will not load and I do not have the shortcut on my computer that allows me to open and scan from the computer screen..

Took me all day to get the old XP working. But, I had success in flashing the printer.
1. Installed the software from the original DVD that came with it. Had Norton antivirus and firewall turned off and installed the printer using USB.
Note: Win XP does not have User Access Control (UAE) and I did not think to turn this off during the unsuccessful flashing on the Win7 PC. If you are running an AV program, I would turn UAE off and disconnect my internet connection. You dont need it to flash the printer.
2. I updated the HP software via the HP solution centre. Open it and you should see a choice to update the software.When updating it tells you that it will fix a communication problem with the printer. Run it. I usually tick the box to "shut down the computer after completion". This way, I can walk away and if it has shut down, it usually has updated successfully. If it is still running and hangs then there is a problem. Make sure to print a test page from the printers property window. If it does, you know it can communicate after the update.
3. Flash the printer. It will happen as per the instructions from HP. I had the .exe on a usb stick and it did it from that.
Hope that helps.
Werner

New to bootcamp and cant get it to install windows 7

Hello bootcamp gurus,
I have a iMac 3.06 Ghz Intel Core 2 Duo running Mac OS 10.6.6 and it came installed with Boot Camp Assistant 3.0.1 (313). I purchased Windows 7 Profession download. I have downloaded it and burned the 3 files on to a DVD. The files are entitled "Win7-P-Retail-en-us-X64.exe", "setup1.box" and "setup2.box". I followed the instructions in Boot Camp Assistant and noticed that Windows 7 doesn't appear included. I tried to find an update to Boot Camp but everything is an .exe file. I'm very confused.
In any case when it goes to the windows side it says it can't find a bootable disc.
Can any of you give me some pointers to get this installed?
Thanks you so much for your time.

You can load the ISO into VirtualBox and burn from there.
If you use Disk Utitity to burn an ISO you need to set it to 2x and use slow reduced burn speed or it won't work properly.
You purchase was thru school I assume, and those are intended as upgrade I thought but Windows 7 Pro (and either 32-bit or 64-bit).
There should have been a $15 extra offer to have it on physical media DVD also.

I just upgraded to a new iMac running OS X 10.8.2 and can't scan from by Brother MHC 7820N. Printer works. I reinstalled the scanner driver but when I try to scan, the scanner doesn't connect to the imac. Image Capture says no scanner connected.

I just upgraded to a new imac running OS X 10.8.2 and am having trouble scanning from my Brother MHC 7820N. Printer works fine but the scanner won't connect to the imac. I reinstalled the scanner driver from Brother.com but no luck. When I go to Image Capture, it says no scanner connected. Any suggestions?

You might try a third party scanner software. Printer manufacturers are terrible about keeping their products updated. I'd recommend VueScan, you can get a trial version here and if it works and you like it you can purchase it.
http://www.hamrick.com/

Running OS X 10.5.8 and cannot upgrade to itunes 11

I'm running OS X 10.5.8/Leopard and cannot upgrade to itunes 11. I recently installed IOS 7 on my iPhone and it will not sync to my current 10 version of iTunes. Will installing Snow Leopard onto my macbook allow me to install iTunes 11 and resolve the issue?

Yes. You'll need to run the 10.6.8 combo updater after installing the DVD.
(90037)

HT3986 i bootcamp my iMac but i cannot get online from my windows 7

I recently bootcamp my imac with windows 7 but i cannot get online when i am using windows what can i do?

Post in the Using Apple Support Communities forum area.

I am running Win 8.1 on bootcamp and cannot get sound from internal speaker

Similar Messages

Maybe you are looking for