I am running windows xp pro, firefox vs 3.6.8, when I go to print with my canon d 700 firefox closes. This just started.

????/?

Do a clean (re)install and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Similar Messages

  • For no reason when I try to sync my iPad I get a message after about 10 minetes sayingitunes has stopped working windows will get back to you if a solution is found.I used to be able to sync no problem this just started all of a sudden

    I get a message every time I truro sync it says iTunes has stopped working windows will contact you if a solution is found.

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).  The key behaves the same for the laptop keyboard and for an external Apple keyboard?  This just started in last week after 6 months of use

    My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). 
    The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard. 
    This just started in last week after 6 months of use.  The right shift key and other keys on the keyboard all appear to work correctly.
    Suggestions greatly appreciated.

    I have a solution to this issue now after a discussion with Apple Support.  Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences.  Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
    A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key).  I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility.  The SSD appears to be running better as a result as well.
    Hope that this is of use to someone else in the future.

  • My computer with Windows 7 Home updated to Firefox v34.0.5 but my two computers running Windows 7 Pro haven't yet updated beyond Firefox v34.0. Something wrong?

    See info above. I have re-run the update process at least 10 times on both machines running Windows 7 Pro (most recently this morning), and each time both machines running Windows 7 Pro (one is 64-bit, one is 32-bit) say that Firefox v34.0 is "up to date". I checked Mozilla.org, which states that Firefox v34.0.5 was released in mid-December, but it didn't say anything about whether that update was only for certain OSs. I have also run multiple anti-virus scans from different providers on both machines running Windows 7 Pro, and all scans indicate no issues.
    Please advise is there are different versions of Firefox for Windows 7 Home/Pro, or if I am having an issue. If I am having an issue, please advise how I can correct it.

    Hello StevenBeary, the 34.0.5 release it is for all users who download a fresh version of Firefox, or download it for the first time. This release will NOT be found via Firefox's update.
    Firefox 34, it is the latest release via update. You are OK.
    see [https://support.mozilla.org/en-US/forums/contributors/710905?last=63447#post-63027 Tyler Downer's explanation].
    thank you

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

    New Windows Server 2012 R2 Standard in the environment.  Added print services to it and added five HP printers to it and shared them.  Also deployed the printers via group policy.
    Clients are running Windows 7 Pro x64.  The group policy fails to install the printers (error 0x00000002).  We get the same error when trying to manually add the printer from the client side.
    From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
    Any ideas on troubleshooting this?
    Thanks.
    -John

    John,
    You might try playing with the HP universal driver, that might help you.  Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
    Check these GPO settings to ensure local machines can install the drivers.
    1. Configure the following two Group Policy settings:
    Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
    2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
    Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
    Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
    This article might help you out also:
    http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
    Cheers,
    Curt Winter
    Certified Microsoft Professional
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

  • HT201210 I have followed the restoration guidelines mention here but I keep getting the same error; 2009. At the end of my tether and don't what else to do as my phone can't get out of restoration mode. My computer is HP DC500 running Windows XP Pro with

    I was updating my iPhone 3g from iOS 4.1 to 4.2.1 when suddenly I lost network connection and the process failed. I have since tried to restore my iPhone 3g with no luck. I keep getting the error code 2009. Which instructs me to check my computer is up to date and all third party security software are turned off. I have done all these pulled out all usb devices but for the one that is my internet modem. I am running Windows XP Pro SP2 on HP DC500 minitower. How do I get out of restore mode. Thank you kindly.

    Not sure if you were told what error 2009 is caused by so I'll let you know if you havn;t been informed. In the article http://support.apple.com/kb/TS3694 is says:
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Can bootcamp run Windows 8 Pro in OSX 10.8.2?

    Can Mac OSX Mountain Lion (10.8.2) run "Windows 8 Pro" in Bootcamp? Since Windows 8 Pro has the ability to run program from passed versions of Windows. This way Windows 8 Pro can run Bootcamp, even though it was made for Windows XP/Vista/7 specificly.
    I need to know whether it can damage my MAC, or I am able to install Windows 8 Pro.
    Thanks guys.

    Windows 8 is not supported by Bootcamp. There are no Bootcamp Windows 8 drivers http://support.apple.com/kb/HT1899

  • Can The 8520 Be Installed On A Computer Running Windows 2000 Pro SP4

    Hi Guys,
    I have a client running Windows 2000 Pro (old habits die hard) and she just purchased the 8520.  Upon putting the supplied disk in to install everything (Desktops, drivers, etc.) I get the error stating it needs a minimun of XP to run.  Can I go back to a previous version of the desktop manager and grab the drivers for the 8520 to make this work?  Any help is appreciated.
    Thanks,
    Marc

    FWIW -- see this KB for PIM compatibility with various DTM versions:
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    I'd advise the most recent version that is compatible with the necessary PIM.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I run Windows 7 pro 64 bits ENG, all my software is in ENG and I am presently in the US. Still, when

    I run Windows 7 pro 64 bits ENG, all my software is in ENG and I am presently in the US. Still, when trying to install Flash Player (download - RUN) I get a message window in Brasilian Portuguese. can you help me solve this issue? Thks.

    Do you get the same if you use the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...)?
    Are any of your system settings (code page, ...) set to pt-br instead of en-us?

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

    I cannot select the Paper Size when I try to print with HP Photosmart B110a
    The same printer was working OK with my old PC with OS Windows 7
    However I got a new PC with OS Windows 8.1 64bit
    I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
    In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
    Do you know what may be the problem?
    Thank you

    Hello Nanu64,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to print from your computer.
    I also see that you stated that not all the options are available in the printing preferences options.  This could be because the installation was not complete or it failed.
    I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
    The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software.  Once the uninstall is complete, reboot the computer so that the changes take affect.
    When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
    The following download is the HP Photosmart Full Feature Software and Drivers.  Save this download to the desktop of the computer so that it creates its own icon.  This will make it easy for us to find when the download is complete.
    Double click the new icon and follow the installation instructions.  The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable.  Connecting the usb cable before hand can cause an issue with the installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I have a 2009 macbook pro and my email account is doubling every message I get.  I've had it for about 3 weeks and this just started.  Any help?

    I have a 2009 macbook pro and my email account is doubling every message I get.  I've had it for about 3 weeks and this just started.  Any help?  Every time I get one email, I get 2 copies of the same message.

    This discussion may prove useful:
    http://forums.macrumors.com/showthread.php?t=88279

  • Is there a way to run Windows 8 pro on a Retina Macbook Pro through bootcamp?

    I recently purchased a copy of Windows 8 Pro to see if I could run it through bootcamp. I have a USB SuperDrive , so I thought it would be simple enough. However, I'm pretty lost on how to configure my bootcamp to work. I've aimlessly looked at tutorials and such, but none have been of much help. I know the Retina macbook lacks an optical drive, so I believed using a Super Drive would work. If anyone can shed light on this situation and help it would be greatly appreciated.

    Yes, but Apple does not yet support Win8, so there are no compatible Windows drivers for the Apple hardware.
    How to Install Windows 8 with Boot Camp on your Macbook or iMac

Maybe you are looking for