I am rying to un-disable my disabled 4th generation iPodTouch. It says that I need to enter the password on my iPod but my iPod is disabled and says to connect to iTunes. Any help? It won't even show up in the left sidebar. Help?? :/
I am trying to re-able my disabled iPod. It is a 4th Generation iPod touch 8gb. It has a crack screen and the lock/sleep button and the volume buttons do not work. It says in red ribbon on the top of the screen, "iPod is disabled Connect to iTunes". When I connect it to iTunes it doesn't show up in the left sidebar. Instead a message pops up and says, "iTunes could not connect to the iPod 'Madyz iPod' because it is locked with a passcode. You must enter you passcode on the iPod before it can be used with iTunes." What do I do? I would really appreciate help.(: thanks.
If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do.
Similar Messages
-
3rd gen iTouch is disabled and can't connect to iTunes! HELP!!
My 3rd gen iPod Touch is disabled and says to connect to iTunes, but when I connect I receive a message saying iTunes is unable to connect to my iPod because it is locked and has to be unlocked to connect. I can't connect if it's not unlocked, but I can't unlock it until it connects. What do I do? Taking it to the Apple Store is a last resort, and I can't connect it to iTunes.
Did you try connecting it in recovery mode as described in this article?
http://support.apple.com/kb/ht1808
B-rock -
my iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff
there should ba a way to undisable it without loosing all of your data
-
My iphone 5s is disabled and its not connecting to itunes
hey,my 5s is disabled and its not connecting to itunes and its not taking my fingure print.what can i do now plz help me out.
http://support.apple.com/kb/HT1212
-
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??
actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:) -
my ipod is disabled and cannot to connect to itune can u hlep me
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipad is showing it is disabled and asking to connect to itunes but when i try it is telling me to put in a passcode. I have put in a passcode. This is fresh out of the box. What can i do?
Try and force iPad into Recovery Mode:
1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
2. Connect USB cable to computer, leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
ipad is disabled and i had connect to itunes. but when i connected to my computer, its not sinc automatically , still ask me to enter the pascode first. so how can i restore my ipad ? seems my laptop didnt know or never get sinc with my ipad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!
Hello seth53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario -
I upgraded my iPhone to 6.0 and in trying to go to The App Store via the new Passbook it says "cannot connect to iTunes store, Help!
You need to go to Date & Time and change the date ahead more than a year. Then try and then you can change the date back.
-
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
Iphone is disabled and can't connect to itunes without passcode
my iphone 1st generation isn't going it's disable and when i connect it to itunes it's say to put my passcode but i can't if the slide button don't can anyone help me please! the people in apple is always asking for money if i have money i would buy a new one please someone help
Try restoring your phone.
-
HT201412 ipod touch disabled and can't connect to itunes to resync it
ipod touch disabled and can't connect to iturnes to resync it
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?
If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
Maybe you are looking for
-
RH8 Crash Log - Does it exist?
RH 8 HTML Hi all, Just wondering if there is a crash log somewhere generated for RH? I've had a random instant crash 3 times in the last 5 minutes, from one project, but I cant isolate or recreate what is causing the crash. Hoping theres a log file s
-
Regarding the generation of the change log request
Hi, While going through the BW310 document,i came across the below notes.. The user can choose whether the changes called up from the different load requests are to be combined in a change log request, or whether a change log request is to be generat
-
Problem to install oracle 8i on redhat 8
Hi everyone, I try to install oracle 8i on redhat8. I copied all installation files to local computer. And when I run ./runInstaller, it just give me following message, and the GUI interface never shows up. Initializing Java Virtual Machine from ../s
-
How to differenciate from BestEffort, ExactlyOnce and ExactlyOnceInOrder?
I developed a sap jca adapter, now I want to get certification from sap for my jca adapter. how to differenciate from BestEffort, ExactlyOnce and ExactlyOnceInOrder? do I need test all these three Quality of Services?
-
Weird Locked Files/Permissions/Dock/Etc
I have some sort of odd locked file/permissions problem (I think). About a year ago, I seem to have done something to my permissions or locked files that I can't seem to fix. I have a variety of disparate symptoms, including applications that won't