I am SD/LE Transportation Consultant
Hi guys ,
New to this SAP community network,
I am looking for Shipping and Transportation related topics ,
This is just my introduction to you guys ,
Feeling good to join you guys,
Thanks
Dhaval
Dear Dhaval
Welcome to the forum.
Go through the links which will give an idea on the related topics you asked
[Organization in Shipping and Transportation|http://help.sap.com/saphelp_46c/helpdata/en/dd/5635a5aea111d199b60000e8a5bd28/frameset.htm]
[Shipping|http://help.sap.com/saphelp_46c/helpdata/en/dd/560708545a11d1a7020000e829fd11/frameset.htm]
[Transportation|http://help.sap.com/saphelp_46c/helpdata/en/8d/7a2bdb440511d2bf740000e8a7386f/frameset.htm]
[Transportation Planning|http://help.sap.com/saphelp_46c/helpdata/en/93/743c79546011d1a7020000e829fd11/frameset.htm]
Thanks
G. Lakshmipathi
Similar Messages
-
Structure copy in BEx query Designer?
I created structure in BEx Query Designer in BI PRD which is our BI production system.
I'd like to copy structure to BI DEV which is our BI development system.
Is is possible?
If you have any solution, tell me about that.
Thanks.Hi
If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
The better way is to create the structure again in DEV system.
If you want to go with reverse transportation, consult your basis person.
Regards,
Venkatesh -
NY07 Metro Commuter Tax Set up
Hello
We are trying to setup some Employees with the NY Metro Tax NY07. They already have New York CIty tax (NY01)and we cannot enter the metro tax for them.
One lives in CT and has that for his 207 record and NY city tax for his 208.
We tried entering them under 234, but it is not working.
T5UTZ
T5UTD
Tables are configured for NY07
For NY07 when we are maintaining the Tax Witholding no taxation takes place and here is the BSI Message we are obtaining:
(NY07 Tax type 19 is maintained in T5UTI),Can any body help me on this ,Do we have to configure NY07 for It 207 an d IT 208
Thnaks in Advance
SreeHello Sree,
The new taxes are work taxes and only need to be added to infotype 208
for employees that work in these counties.
This will work for you. IT0208 should have only NY, NY07 for an example.
Table T5UTZ and T5UTD are Delivery Class C tables, which means that SAP
only delivers the data in client 000 and it is up to the customer to
the data to the non-zero client if they desire.
You need to cassade the data from client 000 to the non-zero client.
To cascade these type of tables in your system, you can use transaction
SM30 to compare and adjust the entries as needed. Please reference the
the end of SAP Note No. 363453 - "DOC: TUB Transport, Consulting Note"
for how it is done with TUBS.
Regards,
Manny -
Hi
What list of activity to do for france and germany tax set up(for FI,SD,MM).
Thanks in advanceHello Sree,
The new taxes are work taxes and only need to be added to infotype 208
for employees that work in these counties.
This will work for you. IT0208 should have only NY, NY07 for an example.
Table T5UTZ and T5UTD are Delivery Class C tables, which means that SAP
only delivers the data in client 000 and it is up to the customer to
the data to the non-zero client if they desire.
You need to cassade the data from client 000 to the non-zero client.
To cascade these type of tables in your system, you can use transaction
SM30 to compare and adjust the entries as needed. Please reference the
the end of SAP Note No. 363453 - "DOC: TUB Transport, Consulting Note"
for how it is done with TUBS.
Regards,
Manny -
Hello All,
Attached is the link explaining the SAP TM - Domestic Outbound Transportation - Multistop scenario end to end.
Link:
Domestic Outbound Transportation - Multistop Scenario - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
Hello All,
Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
Link:
TM Overview + End to End Process Flow - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
Error when using Variable Transport Binding in Sender Mail Adapter
Hi,
I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
Any ideas why this is happening?
Thanks,
BradHi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad -
Transports across clients on same SID
I have a request from the SAP project consultants to set up automatic transports from client 203 to 204 on my development system.
I was given a script that the basis consultant had written to do this on a windows platform (he does not have iSeries background) but the script seems to refer to a different SID and at this time I cannot get clarification from them on this.
The question is what ways can one do a automatic transports from 1 client to another on the same system on an iSeries?
The consultants are complaining about using SCC1.
AnetteHi Anette,
I would say: Both ways: Importing or SCC1 are useful ways ...
The automatic transport - should it happen "immediately" or e.g. all 15 minutes ?
I would normally suggest to NOT use automatic transports but to always use "import all" in DEV.
Why ?
Because the 15 minutes (in average 7.5) are too long for me => I would impoirt manually anyway - but why then all 15 minutes ?
=> I would setup the STMS with transport groups e.g. as follows:
DEV => /QA/ => PRD
/QA/ consists of:
DEV.203
DEV.203
QAS.100 etc.
You could even split /QA/ into a "/DEV-QA/" and a real "/QA/" if you prefer that.
Then all release of transports puts it automatically into the buffers and then they cna import themselves or you could automate it via STMS e.g. all 15 minutes (you should check this with your IFS backup during night).
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
How to delete the Transport Request?
Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das -
Deploying Cisco Overlay Transport Virtualization (OTV) in Data Center Networks
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about how to plan, design, and implement Cisco Overlay Transport Virtualization (OTV) in your Data Center Network with Cisco experts Anees Mohamed Abdulla and Pranav Doshi.
Anees Mohamed Abdulla is a network consulting engineer for Cisco Advanced Services, where he has been delivering plan, design, and implementation services for enterprise-class data center networks with leading technologies such as vPC, FabricPath, and OTV. He has 10 years of experience in the enterprise data center networking area and has carried various roles within Cisco such as LAN switching content engineer and LAN switching TAC engineer. He holds a bachelor's degree in electronics and communications and has a CCIE certification 18764 in routing and switching.
Pranav Doshi is a network consulting engineer for Cisco Advanced Services, where he has been delivering plan, design, and implementation services for enterprise-class data center networks with leading technologies such as vPC, FabricPath, and OTV. Pranav has experience in the enterprise data center networking area and has carried various roles within Cisco such as LAN switching TAC engineer and now network consulting engineer. He holds a bachelor's degree in electronics and communications and a master's degree in electrical engineering from the University of Southern California.
Remember to use the rating system to let Anees and Pranav know if you have received an adequate response.
Because of the volume expected during this event, Anees and Pranav might not be able to answer each question. Remember that you can continue the conversation on the Data Center, sub-community forum shortly after the event. This event lasts through August 23, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.Hi Dennis,
All those Layer 2 extension technologies require STP to be extended between Data Centers if you need to have multiple paths between Data Centers. OTV does not extend STP rather it has its own mechanism (AED election) to avoid loop when multiple paths are enabled. It means any STP control plane issue, we don't carry to the other Data Center.
OTV natively suppresses Unknown Unicast Flooding across the OTV overlay. Unknown unicast flooding is a painful problem in layer 2 network and difficult to troubleshoot to identify the root cause if you don't have proper network monitoring tool.
It has ARP optimization which eliminates flooding ARP packets across Data Center by responding locally with cached ARP messages. One of the common issues I have seen in Data Center is some server or device in the network sends continuous ARP packets which hits Control plane in the Aggregation layer which in turn causes network connectivity issue.
The above three points proves the Layer 2 domain isolation between data centers. If you have redundant Data Centers with Layer 2 extended without OTV, the above explained layer 2 issue which happens in one Data Center carries the same failure to the second data center which creates the question of what is the point of having two different Data Centers if we can not isolate the failure domain.
OTV natively supports HSRP localization with few command lines. This is a very important requirement in building Active/Active Data Center.
Even though your question is related to L2TP, OTV deserves the comparison with VPLS and those comparison will also be applicable for L2TP. The below link explains in detail...
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c11-574984.html
Thanks,
Anees. -
How to transport a custom bapi (written by me) to another server
Hello friends,
We have a software that is integrated with SAP. To make our software work with SAP, we have some custom bapis created on SAP side. We would like to transfer them to another server that is on a different network. After reading many documents and forums here is the what I have done and the problem that I am facing. Your help will be highly appreciated.
1.Started Transaction 'SE80'.
2.Created a test package called 'ZTRANSPORTTEST'.
3.Created a function group called 'ZTRANSPORTTESTFN' under that package.
4.Created a function module under the group called 'ZTRANSFUNCTION'
NOTE: Just saved and activated without adding any code since I won't be using this function
for anything other than to test the Transport Feature.
5. Clicked on the button that said 'Transport Organizer' and saw the list of requests including the
EC1K900083one that I just created.
6. I tried to release it by 'RIGHT CLICKING'
It waited for few seconds with the message....."code inspector checks running.".
Then it failed with an error message as follows
Error in pre-export methods for request EC1K900083
NOTE: I have made sure that everything is activated properly, since I read on a forum that this
error may occur if something is not activated properly. So I have done this step over
and over again making sure that everything is activated properly.
7. I then started Transaction 'SE09' and saw the request 'EC1K900083' under the released tree with a 'CHECK' Mark.
However, when I sent to /usr/SAP/trans/data and /usr/SAP/trans/Cofiles, I didn't find the transport data there.
Has anyone done this before and if so what am I doing wrong? Your suggestions or feedback will be highly appreciated.
Thanks
RamHello Friends,
Thanks for all the responses. I got the following response from SAP TECH SUPPORT which is not very encouraging and so I am just closing this.
Thanks
Ram
===========================================================================
30.04.2009 - 11:40:29 EST - Reply by SAP
Dear Mr Ram,
Thanks for explaining it once again.
The package is just container for development objects that belong together, in that they share the same system, transport layer, and
customer delivery status. Please check the below link http://help.sap.com/saphelp_nw70/helpdata/en/ea/c05da3f01011d3964000a0c94260a5/frameset.htm
As I understand correctly you want to 'export' your development outside of your SAP system domain. For that either you can do it using 'Externalsystems'. 'External systems' are a special form of virtual systems. A real SAP System is used in their place to perform actions on the transport directory. They are different from virtual systems in that they have their own transport directory that you can freely choose, you can use external systems to:
-Write transport requests to exchangeable data media
-Read transport requests from exchangeable data media
-Send transports to other transport domains using an intermediate directory
-Send transports to other transport domains using an intermediate directory
If you want to transport between systems in different domains, we recommend that you link domains with 'domain links'. There must be a
permanent network connection between the systems in the two domains, similar to the connection between systems within the same domain.
I would recommend to take a look in the documentation available in SAP Online help for further information on how to setup this
complex transport landscape. I hope this information helps you to setup the transport system.
Or you simply create a transport request of type 'transport of copy' and input target system and client (which you should know) system as
target system include the objects (bapi) in the request. This ensure that requests will only be imported into that system. Other systems willnot be touched.
'Transport of copies' type transports do not get automatically added to the next buffer after they have been imported into a system. When creating a 'Transport of copies' transport the target system must be specified as this type of transport does not respect the defined transport routes outlined in TMS.
You can use this request type to transport objects to a specified SAP System using Transports of copies. The objects are transported with the version they have in the current SAP System. The original location of the objects remains unchanged. There is no delivery to another SAP System.
But we at AGS we cannot suggest, as the nature of your request indicates this is a consulting issue rather than a software error.
Customer Support's charter, under the SAP maintenance agreement, is to handle software or system defects in the standard delivered R/3 product. Please refer the note 1054121.
So you have to seek assistance from SAP's Remote Consulting Service which is billable.
I am sorry that I could not give you more positive reply in this case.
With warm regards,
Sajiv
Active Global Support - Technology
========================================================================= -
Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
LeszekHi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek -
Error while exporting .epa file to transport request
Hi Experts,
I got a problem while exporting the transport package to transport request. In the last step of the export process, I am getting a status message as
"Could not release BIPortalContent.epa to transport request ABCD900005; consult your system administrator."
Can anyone help me in diagnosing this problem? I could not get a solution for this and due to this, the export process is stopped. I have tried with different transport requests and different authorizations, but result is the same.
I would appreciate your help in resolving this issue.
Thank You.
Regards,
Murthy J N.Hi Bala,
Yes, I am using CTS
and I have tried all possibilities but the export to the transport request is not successful.
Regards,
Murthy. -
Error when transporting BI 7.0 request
Hi Experts,
I´ve been trying to transport the first and simple request to the QAS environment and I´m getting error 12 with the log below. No one knows till now what´s going on, so I would really appreciate any help. I´m a BI Consultant and I can´t understand the whole meaning of the error description. In this request there´s just a an Infoarea object.
Thanks in advance.
Fabio
Log File: /usr/sap/trans/log/CBDI900093.CBQ
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
Main import
Transport request : CBDK900093
System : CBQ
tp path : tp
Version and release: 372.04.29 700
R3trans version 6.14 (release 700 - 14.05.08 - 17:05:00).
unicode enabled version
===============================================
date&time : 28.08.2008 - 09:12:41
control file: /usr/sap/trans/tmp/CBDKK900093.CBQ
> #pid 1228956 on celcbq ()
> import
> buffersync=yes
> file='/usr/sap/trans/data/R900093.CBD'
> continuation='/usr/sap/trans/data/R900093_#.CBD'
> client=300
> csi=yes
> repeatimport=yes
>
> excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP
R3trans was called as follows: R3trans -u 2 -w /usr/sap/trans/tmp/CBDI900093.CBQ /usr/sap/trans/tmp/CBDKK900093.CBQ
active unconditional modes: 2
Connected to DBMS = ORACLE --- dbs_ora_tnsname = 'CBQ' --- SYSTEM = 'CBQ'.
0 0
trace at level 1 opened for a given file pointer
================== STEP 1 =====================
date&time : 28.08.2008 - 09:12:41
function : IMPORT
data file : /usr/sap/trans/data/R900093.CBD
Continuation : /usr/sap/trans/data/R900093_#.CBD
buffersync : YES
client : 300
repeatimport : YES (corresponds to unconditional mode 1)
repeatclimport : NO
c.s.i. : YES
l.s.m. : VECTOR
charsetadapt : YES
def. charset : WEUROPEAN
commit : 100000
table cache : dynamic
EXCLUDING : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R
Data file is compressed with algorithm 'L'.
Export was executed on 28.08.2008 at 09:10:40 by cbdadm
700
with R3trans version: 14.05.08 - 17:05:00
Source System = IBM RS/6000 with AIX on DBMS = ORACLE --- dbs_ora_tnsname = 'CBD' --- SYSTEM = 'CBD'.
language vector during export: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdi(),./:;
language vector during export: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdi(),./:;& (ISO-ARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVB
lsm during export: VECTOR
trfunction = K (transport to consolidation system)
Used Commandfile CBDK900093 (SAP237827/2)
This is a transport to consolidation system.
1 entry for E070 inserted (CBDK900093).
2 entries for E071 inserted (CBDK900093 *).
1 E071C entry created
1 entry for E070C inserted (CBDK900093).
8 entries for E070A inserted (CBDK900093 *).
1 entry for E07T inserted (CBDK900093 *).
Start import R3TRAREA0HCM ...
2910 2910
1 entry for TADIR inserted (R3TRAREA0HCM ).
1 entry for RSDAREA inserted (0HCM M).
0 entries from RSDAREAT (&0HCM M) deleted.
0 entries from RSDAREAT (;0HCM M) deleted.
0 entries from RSDAREAT (:0HCM M) deleted.
0 entries from RSDAREAT (/0HCM M) deleted.
0 entries from RSDAREAT (.0HCM M) deleted.
0 entries from RSDAREAT (,0HCM M) deleted.
0 entries from RSDAREAT ()0HCM M) deleted.
0 entries from RSDAREAT ((0HCM M) deleted.
0 entries from RSDAREAT (i0HCM M) deleted.
0 entries from RSDAREAT (d0HCM M) deleted.
0 entries from RSDAREAT (c0HCM M) deleted.
0 entries from RSDAREAT (b0HCM M) deleted.
0 entries from RSDAREAT (a0HCM M) deleted.
0 entries from RSDAREAT (90HCM M) deleted.
0 entries from RSDAREAT (80HCM M) deleted.
0 entries from RSDAREAT (70HCM M) deleted.
0 entries from RSDAREAT (60HCM M) deleted.
0 entries from RSDAREAT (50HCM M) deleted.
0 entries from RSDAREAT (40HCM M) deleted.
0 entries from RSDAREAT (30HCM M) deleted.
0 entries from RSDAREAT (20HCM M) deleted.
0 entries from RSDAREAT (10HCM M) deleted.
0 entries from RSDAREAT (00HCM M) deleted.
0 entries from RSDAREAT (Z0HCM M) deleted.
0 entries from RSDAREAT (Y0HCM M) deleted.
0 entries from RSDAREAT (X0HCM M) deleted.
0 entries from RSDAREAT (W0HCM M) deleted.
0 entries from RSDAREAT (V0HCM M) deleted.
0 entries from RSDAREAT (U0HCM M) deleted.
0 entries from RSDAREAT (T0HCM M) deleted.
0 entries from RSDAREAT (S0HCM M) deleted.
0 entries from RSDAREAT (R0HCM M) deleted.
0 entries from RSDAREAT (Q0HCM M) deleted.
1 entry for RSDAREAT inserted (P0HCM M).
0 entries from RSDAREAT (O0HCM M) deleted.
0 entries from RSDAREAT (N0HCM M) deleted.
0 entries from RSDAREAT (M0HCM M) deleted.
0 entries from RSDAREAT (L0HCM M) deleted.
0 entries from RSDAREAT (K0HCM M) deleted.
0 entries from RSDAREAT (J0HCM M) deleted.
0 entries from RSDAREAT (I0HCM M) deleted.
0 entries from RSDAREAT (H0HCM M) deleted.
0 entries from RSDAREAT (G0HCM M) deleted.
0 entries from RSDAREAT (F0HCM M) deleted.
1 entry for RSDAREAT inserted (E0HCM M).
1 entry for RSDAREAT inserted (D0HCM M).
0 entries from RSDAREAT (C0HCM M) deleted.
0 entries from RSDAREAT (B0HCM M) deleted.
0 entries from RSDAREAT (A0HCM M) deleted.
End of import R3TRAREA0HCM
E071-LOCKFLAGs 000002 - 000002 updated ('2', 1 entries).
E071C entries 000002 - 000002 deleted (1 entries).
CBDK900093 touched.
1 tables in P-buffer synchronized.
1 tables in R-buffer synchronized.
2310 5220
***LOG BZY=>unexpected return code 103 calling INS
306203 0.306203
db_syflush (TRUE, FALSE) failed 22 0.306225
db_con_commit received an error return code in before-commit action
32 0.306257
*** ERROR => missing return code handler 25 0.306282
caller does not handle code 1024 from dblink#5[293]
==> calling sap_dext to abort transaction
sap_dext called with msgnr 900:
Main import
End date and time : 20080828091241
Ended with return code: ===> 12 <===
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.Hi Fabio,
You should contact your System Admin for this error.
Since the transport tp return code is 12, that means this not because of the content of the transport. however, it may be due to some other technical settings.
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
Regards,
Zaheer -
Transport control program tp ended with error code 0247
Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KCHi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali.
Maybe you are looking for
-
Collection problem with RFC function module WSDL.
Hi. I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser. Another team is trying to consume this RFC FM as a web service fr
-
Need help about roll ups for average that contains logic
--Hi everyone, --I have posted this one on the forum before. (how to do outer join select query for an APEX report )--I thought it works fine, but then yesterday, the tester check and said that the Average total is not correct --the query is as below
-
Deep structure output Issue:
Hello everyone, I have an output form that simply contains billing document item records. Repeating subform works great. However I have been asked to make a more complex solution. I have been tasked to output the corresponding condition records for e
-
PDF's become bloated, deadline looms
Hi all, I'm trying to do something that's never been a problem in the past, as recently as a few months back. I have a file created in FastTrack Schedule that's a mere 900 kb, 25 pages with some colors, but in a layout that does not show the timeline
-
I would like to remove this yellow light from an image
Im sure this is pretty basic stuff but I'm not very good with Photoshop. Is there a way I can get rid of the tungsten light glare on the object in the image just leaving the nice daylight glare?