I am still having issues with connecting to the internet even though it shows I am connected to a network

What am I doing wrong. I am trying to connect to my home network??

ALSO: My iPhone can connect to other WiFi networks just fine, but not this one.

Similar Messages

Anyone still having issues with connecting to wifi since updating to IOS 6.1.1 (iPhone 4S)?

It worked for about 5 mins every 40 mins up until 12 hours after updating the software. The wifi is greyed out (can't turn on or off) now, and I am becoming rather frustrated with this as I have been without internet for at least a week now, with my work relying heavily upon internet access. Any help would be great, I have done the hard reset, a normal shut-down, and I have restored my iPhone twice now and still no change. ANY help would be fantastic!

I'm having the exact same problem! However, mine hasn't worked at all even after resetting network settings, restoring phone from back up and as a new iPhone, drained the battery and turned the phone on and off. I am really angry because apple released an update yesterday to fix bugs specifically on iPhone 4S and it has done nothing. My idea would be to book an appointment with your local apple store. I have one on Saturday and hopefully they will replace the phone as I am still under warranty. If you're not still under warranty I think it'll cost you some money, which ***** because its apples fault.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.
I have contacted apple via email and tried all the steps they have recommended and it is still not working.
I have tried disabling my McAfee and that does not work either.
Anyone that the phone number to apple express so I don't have to keep waiting for them to email within 48 hours?
Thanks.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

I'm having issues with connecting my iPhone 4 to iTunes?

Here's some information:
Apple product: iPhone 4
Computer: Windows 8 (originally) to Windows 8.1 (upgraded version)
Okay, I'm having issues with connecting my iPhone 4 to iTunes. I've connected it via U.S.B. and now everything's not working right the 10th time. Am I to redownload the iTunes software once again or will I never be able to add music anymore?

OffTime wrote:
What do you mean with logging?
Hans
Close any open applications.
Click the Apple icon top left of the screen.
Select the bottom option in the cascading menu: Log Out (your user name).
Log in a Guest.
This will dertermine if there is a problem with your Admin account.
Al

STILL HAVING ISSUES WITH FLASH PLUG-INS & CRASHES

I updated to the new 11.6 Adobe Flash and I am still having issues. I had the same issues, with the previous version of Flash Player. This issue occurs, multiple times daily. When I play a game on Zynga.com or Facebook (Daily), I either receive the message that the "Plug-in is not responding," or it Crashes. This then effects other websites, I have open in other tabs ie; Verizon.net, Adobe, etc. I have posted numerous Bug Reports on Google Chrome and one Bug Report on Adobe, without any results? It is EXTREMELY FRUSTRATING! It happens multiple times during a game, sometimes the plug-in issue resolves itself (only for a very short time) or it Crashes, or it doesn't do anything and I have to close the tab and re-load (refreshing does not work) or it just Crashes without warning and I usually lose data. I am not the only person, who has this issue RE: Game play on Zynga & Facebook. Any advice would be GREATLY appreciated. Thanks

This seems to be an issue with Zynga games and the DEBUG version of Flash Player exclusively. I have always had to use the non-debug version of Flash Player when playing Zynga games. As such, this seems to be a problem on Zynga's end and therefore need to take it up with them.

Still having issues with my podcast feed in iTunes

I am still having issues with my podcast feed. The podcast is not updating in iTunes yet I can see some of the new episodes through an alternative RSS.
My podcast feed is
http://feeds.feedburner.com/SosChurchStockholm.
Not sure what I am doign wrong.
Thankful for any help in this regard.
Thanks

I'm afraid I can't give you an easy answer. The Store has not updated since the episode of 10th November, but the later episodes appear when subscribing and there doesn't appear to be any problem with the feed.
The Store does appear to go through sticky patches sometimes and take a long time to update some podcasts; it will probably catech up eventually and I'm afraid that there isn't really much you can do about it. You could try emailing Support ad podcasts 'at' apple.com, but I suspect you will get a form answer telling you how to add episodes (which you already know).

Is anyone else having issues with airplay after the Lion update?

Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

So, don't use youtube.
http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
http://www.youtubealternative.com/

HT4623 I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me?

My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?

Ok....
Now go to your router's settings. Not sure who makes your router...
Look at wireless part of it and see how many computers are actually hooked up to it.
Delete your computer from it (in your router).
Restart your router.
After your router has restarted, try to connect to it with your MB and see if you can browse the net.

My iMac won't stay connected to the internet, even though all other computers in my house stay connected

My iMac won't stay connected to the internet, even though all other computers in my house stay connected, and its connection is set up the same way my fiance's macbook is (his macbook is about three years older than my iMac). Every time my computer goes into sleep mode and I come back (even if it's mere seconds after giving the black screen) I have no internet connection. I discovered a workaround for it some time ago, but now that is working less and less, and now my computer randomly disconnects WHILE I'm actively using the internet. Just a few minutes ago, the connection refused to come back until I restarted my computer, even though once again all other computers in the house were connected. The workaround I discovered before and which doesn't work as reliably now, is to click opne Airport at the top right of the screen, click "Open Network Preferences," then click "Assist me," then click "Diagnostics," and wait for everything to turn green again, signalling a connection.

Let's check the quality of your connection since signal strength alone does not insure a good connection. The "bars" that you see at the top of the iMac screen are there pretty much for show.
Hold down the option key on the iMac while you click on the Apple icon at the upper left corner of your screen and select System Profiler
Look down the list of items at the left of the window until you find the setting for Network, then click on AirPort.
In the window to the right, look for any listings of your wireless network name. You may possibly see two listings for the wireless network name.
We need for you to list the information that you see for Signal / Noise. These will be negative numbers. Post back with your findings and we will continue.
In the meantime, please move any cordless phones that you have or any other electronic devices that are near the iMac as far away as possible from the iMac.
If the iMac is located in a corner or an enclosed area, give it as much room as possible since the wireless antenna is on the back of the iMac and it needs to be able to "see" the room.
Anything that you can do to minimize the number of obstructions like walls or furniture etc between the iMac and the wireless router will help the cause as well.

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

hi

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated.

I am still having issues with connecting to the internet even though it shows I am connected to a network

Similar Messages

Maybe you are looking for