I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

Similar Messages

  • HELP!!!! I have spent hours trying to find out how to embed an image with a link or a Microsoft Word document with a hyperlink built within the document -- not as an attachment! Does ANYONE know the secret? Can it be done, or not! My PC clients do it.

    HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!

    Don't know if this applies to Lion, but read here:
    http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/

  • TS3230 I did an update on computer 10.6.8 today and now I have spent hours trying to figure out why You Tube screens are just a black screen with no play options etc

    Im not the most Computer tech savvy fella, stopped doing updates along time ago as I always have issues after updates. Thought I'd do one and sure enough here I am with issues. At First there was aplug in error > I uninstalled and re-installed and that has now gone buy all i get now is a black screen on You Tube that should have options to play but these options are not there. Any help greatly appreciated

    Flash Player update?  Plug-in failure?
    Wait until Adobe fixes the issue.
    If not, try this.
    Adobe Flash Player 13.0.0.0182 Pro  Plug-in failure workaround
    http://forums.adobe.com/message/6288150

  • TS4223 I accidentally bought the HD version of a movie for my daughter's iPod nano (it can't be watched on the Nano).  So I'm trying to figure out how to re-download the SD version.  do I have to pay for the lower version??

    I accidentally bought the HD version of a movie for my daughter's nano. you can't watch HD on a nano.  So I'm trying to figure out how to re-download the SD version.  This help screen makes it seem like you can just correct the problem and just "download" the lower version.  But when I follow the steps, I basically get to where I'm just having to actually purchase the other version.  Do I have to pay to get the lower quality version after I've already paid for the HD version?

    When you purchase an HD movie or show, in most cases the SD copy can be downloaded from your purchases area in iTunes. On the main iTunes Store page, go to Purchases under the Quick Links and then select Movies or TV shows as appropraite. Click the "Not On This Computer" button. Uncheck the "Download HD when available" box and you should then see the SD copies of the movies/shows and be able to download them.
    Note that with digital copies from a Blu-Ray or DVD, if it comes with an HD copy, you normally cannot get the SD copy as well and have to purchase it separately if you want it.
    Regards.

  • Is anyone else having issues with purchased songs? I bought several songs and only 1:30 downloaded

    Is anyone else having issues with purchased music from I tunes? Every song I recently purchased is only 1:30 long.

    Not having any of those.

  • I'm trying to figure out how to reload or go back to last session. There is never a www address in my webbar. Why can't I go back, reload, or refresh to last session or same page. If this makes sense.

    I have the back/forward and reload buttons. They don't work. In the address bar, or wear you see http://www there is only the words that read Go to a Web site. If I want to go to a certain webpage I was at. I have to open a new window and start at the beginning again.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • I am still having issues with the ipad 4th generation

    The number 528483406 is my case number.  This ipad is still giving me issues worse than before.  I can be in any application and it will all of a sudden leave that app to go to the main screen.  I cannot have this.

    Call apple support....this is a user to user forum

  • Can I use internet tethering to link my iPad 3WIFI to the internet through  my iPhone 3GS?  My provider O2 assures me I can with the tariff I have for my iPhone.   If so, how do I do it???

    Can I use internet tethering to link my iPad 3WIFI to the internet through my iPhone 3GS? My provider O2 assures me I can with the tariff I have for my iPhone. If so, how do I do it???
    Thanks!

    ios understanding personal hotspot  http://support.apple.com/kb/HT4517
    troubleshooting hotspot http://support.apple.com/kb/TS2756

  • TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

    Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

    I just started having this yesterday.  It's only happened twice, but it's annoying.  My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated.  Worked fine after that.  Then just a moment ago today my wife texted me and the same thing happened.  I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter.  I suppose I'll send Apple some feedback on this issue.

  • Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

    I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
    That's great.
    However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
    Here's a video that shows what's going on:
    mac pro issues july 7 - YouTube
    Issue #1
    Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
    When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
    I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
    Issue #2
    This is the second project you'll see in the video.
    After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
    Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
    But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
    So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
    Here are my specs:
    Mac Pro 6,1 (Late 2013)
    3 GHz 8-Core Intel Xeon E5
    64 GB 1867 MHz DDR3 ECC
    AMD FirePro D700 6144 MB (x2)
    OSX 10.9.4
    Firmware: 2.20f18
    What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
    Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
    I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
    This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
    I've reported this issue to adobe.

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

  • I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

    i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
    i have told them nuumerous times that for better understanding i have made a video of it but no response..
    really disspointed with your customer support.
    i have uploaded them in google docs..links below.. t
    he first one happened on 30th of april 2014   https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
    the second happened today. i called customer care but no satisfactory respose either.  https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
    who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
    its still under warrenty. please help.

    Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
    If you cannot take it person contact them to determine how to send them your phone.
    You can't expect them to replace your iPhone without first examining it.

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • HT4628 Still having issues with Lion os X and wi-fi

    I am still havign issues with Lion os X and wi-fi.   I have 3 domputers in my house including the new macbook pro that has lion os x installed.    The wifi drops out all the time (every 2 minutes).   I have followed all the instructions on how to fix this but I am still having issues.    The other two computers work fine,  one of the is Lion os X that has been updated but I managed to play with the setting and fix this one.   This computer worked fine on Snow leapard and then a soon as I installed Lion the wifi started having issues.
    When will apple make an update that is going to fix this problem.     You want to buy a new computer that works,  I took it into apple and they told me that it is my router,  but I know it is the software as there are 100's of blogs and threads about this exact issue occuring only when their computer was updated to Lion.
    Is there anything else I can do to fix this issue other then un-installing Lion and buying Snow Leapard?

    Does this problem happen with just your airport base station?  Do you have a 3rd party wireless router?  Can you duplicate the problem using any wifi access point?  Did your computer come with 10.7 preinstalled?  Did you purchase the applecare with your computer?

  • Still having issues with my podcast feed in iTunes

    I am still having issues with my podcast feed. The podcast is not updating in iTunes yet I can see some of the new episodes through an alternative RSS.
    My podcast feed is
    http://feeds.feedburner.com/SosChurchStockholm.
    Not sure what I am doign wrong.
    Thankful for any help in this regard.
    Thanks

    I'm afraid I can't give you an easy answer. The Store has not updated since the episode of 10th November, but the later episodes appear when subscribing and there doesn't appear to be any problem with the feed.
    The Store does appear to go through sticky patches sometimes and take a long time to update some podcasts; it will probably catech up eventually and I'm afraid that there isn't really much you can do about it. You could try emailing Support ad podcasts 'at' apple.com, but I suspect you will get a form answer telling you how to add episodes (which you already know).

Maybe you are looking for