I am storing photos in Mac's iPhoto but editing them in PSE12. When I save my edits, everything disappears and I have no idea where they've been saved. I've looked at all the possibilities, but no luck so far. Any ideas?? Thx.
I'm storing photos in iPhoto but editing them in PSE12. However when I save my edited photo I can never find where it's been put. My settings are set to put the photo back with the original, however it doesn't seem to be there, or anywhere else. Any ideas??
You should not have to choose a location. The saved copy should automatically appear in the iPhoto Library. You must save (Cmd+S) after editing in the Elements Editor Application. Do not use “Save As”
Under the iPhoto prefs – Advanced tab, if you have set up Elements as your external editor its best to set the default back to iPhoto so the first dropdown shows as:
Edit Photos : In iPhoto
You should then be able to edit normally e.g.
Double-click to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in elements.
Also launch the Elements Editor and go to Preferences >> Saving Files
Set the dialog drop-down “On First Save” to show “Over Current File” and click OK.
Similar Messages
-
My iphone 5 became dead during working. I have tried all the possibilities but with no success. Nothing appears when we connect it with itunes. I have even tried pressing home and switch button together. Kindly help me.
Are you sure that it has a charge? Try leaving it connected to it's wall charger for a while and then see if it will start up.
Best of luck. -
Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks
When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?
Just in case (even though your symptoms aren't explicitly mentioned in the document), let's check to see if there's a LSP problem in play here:
Apple software on Windows: May see performance issues and blank iTunes Store -
i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?
I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown -
Can anyone help me? It would be very much appreciated. Thank you!
I assume that you don't have a rescue email address (which is not the same thing as an alternate email address) set up on your account, as described in then steps 1 to 5 on the page that you posted from ? If not (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use those steps to add a rescue email address for potential future use -
My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN -
My safari menu bar is missing. The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away when borrowing my computer. Any ideas how to retrieve it? Thanks.
I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to. I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite. -
I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My computer and itunes app do not see my iphone when I plug it into either USB port on the computer. The cable works because I can hear the iphone start charging off the computer. But there is no indication of the device in itunes or on my hard drive device list. Any ideas?
Have no idea what you mean by "basic stuff". Try EVERYTHING in this support article:
iPhone: Not recognized in iTunes for Mac OS X -
My iphto will not open after I had to shut down my imac due to it not being able to close iphoto . It just says opeartion not able to open.
Try at the very least to update your iPhoto version to 8.1.2.
-
Is there a way to manually manage apps? I have lots of apps that I don't want on my iphone all the time, but I don't want to delete them from my itunes account permanently.
Deleting apps on your phone does not remove them from your account. They can be re-downloaded for free from the App Store, or synced from your computer as needed.
The easiest way to manage apps is to connect to iTunes on your computer, go to the Apps page of your device in iTunes, select which apps to remove, then sync. -
I guess in October of 2013, Dropbox changed their program so you don't need a public folder to place your files in. I followed the instructions on numerous youtube and google result sites on how to do this. I thought I followed all the instructions but it still doesn't work. I downloaded Dropbox and configured it as instructed. I created a domain at .tk and when I put the URL in my browser, I see that .tk does go to my dropbox index html but it is a blank screen. Can anyone tell me what I'm doing wrong?
I would ask this to dropbox it could be they have blocked the option to avoid being used as free web hotels
-
I have all the documents, but can't locate my discs - need iphoto and can't get without the original.
If you buy used you have to be careful. I am not sure what software came with which system versions and which computers but the iLife application history is complex. If you end up looking for "original" discs such as those that came with your computer, make sure iPhoto was part of it, and make sure the discs you buy are really identical to the ones for your computer model. A lot of people sell gray colored discs as installer discs, but the versions are machine specific so getting any old Tiger installer may not work on your computer. Unfortunately the universal Tiger installer may not have iPhoto. Maybe somebody more familiar with the iPhoto history can provide specific advice.
An alternative is to look for a used iLife series that will work on your computer. Again, this will have to be used. Apple's staying ahead of the curve basically means those of us with old machines are left to fend for ourselves as best we can. -
Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!
This writeup comes from the article referenced below it:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1
Maybe you are looking for
-
How to create a single instance ASM installation on Windows using 11gR1 ?
Good afternoon, After reading much documentation and doing a lot of Googling, I have not found a step by step procedure on how to install/use ASM for a single database instance successfully. This is using Windows XP SP2, Oracle 11gR1 (I can likely ad
-
I just bought a MacBook Air and don't want to store all my photos on it. I'd like to be able to store and access them on a separate back up disk but iPhoto won't allow me to access these saying: "The iPhoto library is a Time Machine backup, and so ca
-
dear all please help me, i have a case. if i have pdf file which consist 4 page can I protected ? page 1 : consist as image and text, want to protect text only. page 2 : consist just a text, unprotect anything page 3 : consist image and text, want to
-
Routines in pricing for freight as per value basis
Dear friends, Im my Import pricing procedure if there are 10 line items and i wants to put over all freight as value . I can put at freight condition. But my requirement is that - if there are 10 lines items and having freight 100 (overall) Then this
-
Web Pl/Sql with Jdeveloper(903)
hi all i am using jdeveloper to develop some pages build with web pl/sql but when i try to run it from jdeveloper it fails (the database is 9.0.1)and gives the error Executing PL/SQL: CALL SCOTT."JDEV_TMP_PROC_1"() ORA-06502: PL/SQL: numeric or value