I am struggling with a blemish.

I am struggling with a blemish - need to be rid of it.
I have successfully used the 3D camera and tracked all the points, selected three points via a target, layed a cover over the blemish, adjusted it to the correct size with corner points etc. When I test the clip the bandaid does not follow the movement of the person. Original Camera is on a tripod. The movement of the person is minimal -shifting from one foot to the other. There is a Kubota moving in the background.
If I could photoshop each frame I would. It would be easier. The little clip is 1m09sec long.
Any advice out there? I have been working three days straight on tutorials trying to discover what I am doing wrong to no avail.
Thanks.

If the subject/person is moving, the 3D Camera Tracker is not the right tool for the job. That is for when the movement in the scene is entirely because of the camera.
If you're just tracking a blemish and trying to blur it out, then draw a mask around the blemish, use the mask tracker to track the mask, and use an effect mask to limit the effect to within the mask.
Or use mocha.
Or use the point tracker.

Similar Messages

Is anybody else struggling with an intermittent connection when using the Magic Mouse/Trackpad ONLY on Boot Camp?

Hi,
I've seen thousands of posts about Bluetooth connection issues and interference and stutter/lag for both the Magic Mouse and Trackpad (affecting both Mac OS X and Windows under Boot Camp) but my problem is different.
To summarise my setup, I use:
- Retina MacBook Pro (lid closed or open, doesn't make a difference to this problem)
- Thunderbolt Display
- Wireless Keyboard
- Magic Trackpad (have also tried a Magic Mouse and experience similar issues to the Trackpad)
And in Mac OS X, everything works perfectly. The keyboard and trackpad work smoothly when I'm 6-7 metres from the machine, whether or not the laptop lid is open or closed, and whether or not the Thunderbold Display is connected.
But on to my problem: the bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
But during usage, the cursor stutters/lags frequently, and tap to click (when enabled) seems to get triggered by mistake all the time (even when I'm not touching the Trackpad or even at the computer, clicks get registered).
The Wireless Keyboard is perfect, and works well 5 metres from the machine. The Mouse and Trackpad, though, don't even work reliably when they are 6 inches from the machine. The built-in trackpad on the laptop works perfectly too, in Windows and Mac.
I spent a week assuming I was suffering from Bluetooth interference, so I tried:
- using the laptop with the lid open
- removing the Thunderbolt display completely and trying the Magic Trackpad
- repositioning items on my desk
- disabling wifi
All of these adjustments made minor differences to how good/bad the Trackpad was, but none came close to fixing the problem or making it work as smoothly as under Mac OS X. It was only after doing all of this that I realised perhaps it was just a Apple driver for Windows issue, so I booted into Mac OS X and tested everything out, and sure enough, it's all perfect. But back into Windows, the Trackpad doesn't work reliably at all.
Obviously, the hardware is not at fault, and I assume the signal strength doesn't vary between operating system (why would it?) so I'm left believing this must be a driver issue. The TrackPad and Magic Mouse drivers have been out for a couple of years, so I'm surprised they can still be this bad. I tried both the latest driver from Boot Camp 4.0 (3.2.0.0) for the Trackpad, and also the older one from Boot Camp 3.2 (3.1.0.7) and both are equally bad for me.
So my question is: has anybody else struggled with using the Trackpad (or Magic Mouse) with Boot Camp 4.0 and Windows 7 64-bit, whilst finding it to be perfect under Mac OS? I haven't found many posts complaining about the Windows driver, which is why I assumed it was an interference issue. But I'm almost sure it isn't, having spent 2 weeks investigating.
Any thoughts/suggestions/answers much appreciated!
Kyle

SOLVED!
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one. As soon as I enabled the Windows Wireless Service, the problem came back. Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem. This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer. So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
I really hope this helps others trying to use Bluetooth devices under Boot Camp. All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Cheers

Please help me! I am struggling with the mesh tool!

So I want to make this chair look like it does in the picture, but I cant! There is a chapter in my Illustrator CS3 book explaining how to use gradient mesh and mesh tool, but it doesnt help me at all. I am clueless! The tutorial says that I can create points in the mesh simply by clicking with the mesh tool within an object, but when I try to do that, the pointer is "crossed out". I can only add extra points on lines or edges, but not on empty space within an object. What gives? Why is it that others can do it an I cant? Forgive me if I sound a little too upset, but I've been struggling with this for days and I cannot find an answer.
In this tutorial right here: http://www.layersmagazine.com/illustrator-gradient-mesh-tool.html the guy just clicks in empty spaces creating intersections. In my case it is impossible.
PS: Please look at an attached file and tell me what would be the best way to go about coloring this chair. Maybe I am doing this completely wrong? (I only started learning illustrator about 5 weeks ago)
Sorry for the background template being of poor quality, but this was taken from a book and scanned, so it's the best I could do.

You know something I think there should be a behavioral change in this case. To my way of thinking this option should automatically be disabled if you select the Mesh tool. If for some reason you want the mesh tool not to behave the way there might be a toggle or a double click to get the preferences for the tool 's behavior itself. I can see where this behavior can be useful but there needs to be a toggle.
Selecting the anchors for adding color with out accidentally creating a new mesh division is good thing but you need to be able to work both ways.
What do you think Scott Weichert you use the tool extensively, am i wrong?

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

Hi there. I hoping for help. I am struggling with both...

hi there. I hoping for help.
I am struggling with both my WRT54G router set-up and i can't seem to use your online chat system. I hope that you can help.
I have just moved from Hong Kong to New Zealand and I'm trying to install my WRT54G, bought in Hong Kong, to connect to a Telstra braodband internet connection, but when I follow the instruction CD-ROM I get to the point (number 6 - although this point is numbered 7 in the instructions?!?) when I have connected the router it then says it is checking my settings and then it asks me to put in a password. It then checks my system again and then asks me for the password again, and this repeatedly. I can't get past this point. Because this was happening I pushed the reset button on the back of the router, but it still asks me for a password (I have tried using admin as the password without success) and then goes through the check and asks me for the password again. Any help would be great.
Thanks.
Michael Anthony

What windows OS are you running? It may have not installed correctly.
First go to control panel in start menu, then add/remove programs. it should be in there.
If you do not see it there then go to programs files and see if it is there. if so you can delete the folder it is in, then run disk clean up.
By manually setting up did this work? would like to know the end results.

Just moved from microsoft word, struggling with one thing . . the view

I've just recently started using pages rather then microsoft word.
It seems great, but there is one thing that I'm struggling with, the page view
No Matter what I do I can't seem to show the pages left border (from the perspective of looking at the computer screen)
In word you can see the entire page, then there is space where it finished and around the sides.
I can't seem to get the view to show the space around the top of the first page and the left border of all the pages.
Any help is greatly appreciated!
Thanks in advance

What about the view - one up option? I see it in the help but I don't see it in my document. When I click on View, I don't see one up as an option.
Anyone know if there's a way to see one page above/below the other, rather than spread out side by side?
It's not in the View menu. One-up & two-up is in the percentage box at the bottom left of the document.

Struggling with Applying Cell refences of formulas to multiple cells

Probably a basic question- I am new to Numbers.
Ive been struggling for ages with applying a formula or cell reference to more than one cell at a time. If I select multiple cells (shift or command clicking them) - then I am unable to create a new 'Cell References'. Pressing the equals = sign merely gives me an error sound. And the formula bar is not accessible
I have been struggling with this on and off now for about a week. Help - well it doesn't help and implies that I am doing the right thing, but it is not working. - Please help

marky3 wrote:
I ve been struggling for ages with applying a formula or cell reference to more than one cell at a time. If I select multiple cells (shift or command clicking them) - then I am unable to create a new 'Cell References'. Pressing the equals = sign merely gives me an error sound. And the formula bar is not accessible
I have been struggling with this on and off now for about a week. Help - well it doesn't help and implies that I am doing the right thing, but it is not working. - Please help
A better use for your time was to read carefully *Numbers User Guide* and *iWork Formulas and Fucnctions User Guide*.
We may insert a reference to a range of cells in a cell's formula but we can't insert a formula in several cells with a single task.
The correct protocol is :
insert the formula in the first cell of the range then use the fill down (or fill up or fill to the right or fill to the left) feature.
Yvan KOENIG (VALLAURIS, France) dimanche 21 février 2010 22:21:40

I mistakenly wiped my mac ox from my macbook and i'm struggling with getting it fixed or getting a new one to install.

i mistakenly wiped my mac ox from my macbook and i'm struggling with getting it fixed or getting a new one to install. Can anyone help me? thanks
<Email Edited By Host>

Restart the Mac and hold down Command+Option+R. Choose to reinstall OS X. The version of OS X your Mac came with will be installed.

SendXMLtoClient -- struggling with it - Help!!

Hi,
I am trying to do do an example of the "Client Call Addin Response DTD" i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc.
(as per the Client Callin Request DTD) and attached to
ActionSendXMLToClient event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm> </call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is
when I run from Worklist (Swing client program), it errors out
saying it cannot find this class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a
Business Operation from Studio, I can locate this Java class.
So, I am not sure what is missing. The strange part is when I
run from the Worklist JSP page, it errors out saying : "Cannot
execute this task, because it is already done." The task is not
yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks, SLN

You say you added the class to the server classpath but you don't say that
you've added it to the client's classpath. Its the client that is giving you the
error, right? If so, is the class in the worklist's classpath?
In article <3d2f6575$[email protected]>, "SLN" says...
>
>
Hello!!! How come no one has responded to this one???
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!
I AM STRUGGLING WITH THIS ONE!! I thought dev2dev newsgroup
is pretty good :-(
"SLN" <[email protected]> wrote:
Hi,
I am trying to do do an example of the "Client Call Addin Response DTD"
i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc.
(as per the Client Callin Request DTD) and attached to
ActionSendXMLToClient event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm> </call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is
when I run from Worklist (Swing client program), it errors out
saying it cannot find this class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a
Business Operation from Studio, I can locate this Java class.
So, I am not sure what is missing. The strange part is when I
run from the Worklist JSP page, it errors out saying : "Cannot
execute this task, because it is already done." The task is not
yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks, SLN

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly app

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.

Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal;

I'm sorry to bother you guys, but this is all new to me! i'm wanting to place my face on another persons photo as a gag. i've been struggling with this all day! could someone explain to me how this is done, in language i can understand??? thanks in advan

I'm really sorry to bother you guys, but this is all new to me! i'm trying to put my face on another persons photo as a gag! i have been struggling with this all day! can anyone explain to me how this is done in language i can understand??? thanks in advance!

What software do you own? Give details, please.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
It's not something you can learn in a forum, question by question. Teaching someone Photoshop from scratch exceeds the scope of this or any other forum.
The process involves isolating your face, by selecting it and deleting the unwanted parts around your face or with layer masks, then placing it as a new layer on top of your target image, making sure it's the right size, color, lighting, etc. Google for tutorials on any of those elements you are unfamiliar with,

Struggling with oracle clustered production environment

Hi Experts,
I have a requirement to upgrade Oracle Data Integrator(ODI) from 10.1.3.5 to 11.1.1.6.3 We have a Clustered production environment where N1 will be up when N2 be down and viceversa.
Here N1 and N2 are the ODI servers as well as DB(11g Release 2) servers. They both access the SHARED CLUSTERED database.
From ODI we will generally point the Oracle clustered IP(Virtual IP) which will internally point either N1 or N2 whichever is active.
ODI application wise we are clear about the procedure.
Having some issues on DB related activities.
1. Should I break the cluster definitely? Cant I do the activity without breaking the cluster?
2. Do I need to point N1, N2, Clustered IP (Virtual IP) while doing the activities?
3. Since its a clustered database, do I need to db related activities once or twice? (Twice means, manually on both the servers)
4. As they are using same file structures (RAC), If the Virtual IP points N1 by default, assume that I create two new users and log in is success. Now i manually point N2 and what will happen if I try to log in to the two new users from N2. will it work?
5. If it will not work, then what would be the solution for this?
Please someone suggest about the clustered environment production problem.
As this is high priority, early response would be highly appreciated.
Need Expert's suggestions for the sequence of steps that to be carried out for a successful migration in clustered environment.
Many thanks in advance..!

This is an ODI question.
Please discontinue your question here and continue it in your duplicate thread here Struggling with oracle clustered production environment
Apart from that, ODI is a front-end tool. If you have any clue about RAC: for ODI it doesn't matter whether your database is RAC or not. the issue is you installed a front-end tool in a RAC environment.
Finally:
As this is high priority, early response would be highly appreciated.For high priority questions there is paid support. This is a forum of volunteers.
Asking for high priority is IMO insulting and rude.
Sybrand Bakker
Senior Oracle DBA

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

Simple JPA prog weblogic 10.3, struggling with java.lang.NoClassDef s

Hi,
Trying to run a basic JPA program using createEntityManagerFactory, EntityManager and persistence.xml.....Everything compiling fine. I'm running it as a standalone Java application on Weblogic 10.3. First I got this error on running.
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/kernel/KernelLogManager, after that I did some search on the net and created the wlfullclient.jar and included it. After that I'm getting the below error.
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/logging/LogEntryFormatter.
Tried removing wlcommons-logging.jar whenever facing an issue, but it doesnt help, it gives some other error when it is removed.
Can some one help to rectify this error please. Not able to find the jar file that has this class
Thanks,
Vick.

For folks who are struggling with this error, I'm posting the solution.
When you face this error java.lang.NoClassDefFoundError: weblogic/kernel/KernelLogManager, first remove the weblogic system libraries, then generate the wlfullclient.jar file(steps are in the net) and add it to classpath.
Ultimately after several inclusion of other jar files which wasnt included, it worked.
All the best.

I am struggling with a blemish.

Similar Messages

Maybe you are looking for