I am stuck in text messging mode and need help getting out

Please help. How do i navigate

If the phone freezes up press and hold the sleep wake button and the home button for 10 seconds... The phone will reset and you will see it shut off.

Similar Messages

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

Stuck in Bootcamp Windows install and can't get out

late 2009 iMac with Mavericks with homemade fusion drive with super drive removed.
Was working fine until i tried to use bootcamp to install Windows 7. Now I'm stuck in the Windows partition, windows won't install and can't get out of the loop. Machine boots white screen with no apple logo and chimes. Eventually has black screen with No bootabe device -- insert boot disk and press any key. I have a USB drive. I've tried everything. Doesn't seem to be recognizing bluetooth keyboard. No sort of button combination on startup works. Tried holding X, command-alt PR, shift, command-R, option. Tried everything. Light doesn't come on on keyboard in startup which means it's probably not recognized. Tried disconnecting internal drives and booting from USB. Tried booting from Time Machine USB drive. Nothings works. Think a USB keyboard would solves this?

I have gotten in this loop. When doing this kind of thing, a usb keyboard would be good to have around, and that is probably the problem, because when I would boot, the first time set the windows partition to the default drive. Hold the key combo and boot into OSX, and go into Settings/Startup Disk/ and change it to The osx hd.

Stuck in recovery mode and can't get out,iPod touch

IPOD TOUCH SERIAL NUMBER 1C744FT1W4T.
HI IM STUCK IN RECOVERY MODE AND HAVE TRIED ALL METHODS ADVISE ON THE INTERNET,AS ITUNES NO LONGER SUPPORT THIS OLD IPOD I CANT UPGRADE AND RESTORE. I KEEP GETTING THIS ERROR SAYING ITUNES DOES NOT SUPPORT. PLEASE CAN SOMEONE ADVISE HOW THIS CAN BE FIXED AS IM AT A LOST CAUSE.
I HAVE TRIED ALL YOUTUBE VIDS AND THEY ALL GIVE THE SAME ADVICE ON HOLDING THE HOME BUTTON AND POWER BUTTON ETC. I EVEN TRIED THIRD PARTY SOFTWARE LIKE TINY UMBRELLA AND IREB AND STILL I HAVE THE SAME LOGO LOCK SCREEN. I DONT MIND LOSING ALL MY MUSIC ON THERE AS I HAVE THAT BACKED U ON HARD DRIVE.
JUST WANT IT WORKING AGAIN !!!!

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Stuck in single user mode and can not get past it

I am experiencing a problem I recently had lent me a Mac g4 tower. I decided to upgrade to tiger and accidentally set the start-up preference to the disc, every time I boot up it goes into single user mode, if I boot up holding the option key it brings up 3 icons on the right is an arrow in a circle formation which is refresh at a guess in the middle is the hard drive which is depressed kind of thing and on the right is a straight arrow. I have tried selecting each of these individually and even pressing enter all but the refresh icon goes back into single user mode. When the disc is in and I go to this it does not ring up the disc as an option.
I have zapped the PRAM reset the CUDA button and even telling it to reset the NRAM etc.
I have tried it with the disk in and out and all paths lead to the same outcome it starts up I hear the tone and the screen goes grey with an apple icon on then it goes to lack screen saying localhost:/root#.
I have also used the (fsck –fy) in single user mode to scan the disk and it says it appears to be ok. I have done all these steps multiple times but I am still getting the same outcome.
I have also tried pulling the logic battery and pressing the cuda switch and leaving it to stand and even pulling the RAM but this has not worked and I am still getting the same out come of been put straight in to single user mode.
I have tried starting up in safe mode but again this just goes to single user mode as well.
As yet I have not tried booting up using this machine as a slave drive or using another Mac as a slave drive and seeing what this out come does as I have not got access to another Mac at this time.
Unfortunately I do not have the original discs that came with the machine either so can not even boot from them.
Any other ideas would be greatly appreciated thank you.
Please read my post properly thanks.
I have tried several key commands such has D, C and even holding (option, command, shift and delete) when i do this it just brings up a folder with two changing flashing icons.

Ok checked them out and followed the instructions given, but still getting the same outcome, looked at the system log and it tells me.
localhost login: PAM pam_inithandlers:no default config /etc/pam.d/other
localhost login:PAM error reading PAM configuration file
localhost login:PAM pam_start:failed to initialize handlers
localhost shutdown: halt by andy
Any more ideas???

Help - I am stuck in tge SL installer and can't get out

After a perfect install on an iMac, I tried to install on a MacBook over Tiger. The installer said there wasn't enough RAM (me bad) and I can't get out. It asked if I want to restore from TM backup - which I don't have. What can I do?

HI,
Try booting from the SL install disk and run Disk Utility.
Shut down the Mac and restart while holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
*When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.*
*Select your start up disk and click Restart*
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. *Make sure there is at least 10% available disk space, 15% is better.*
Carolyn

I have successfully downloaded Photoshop Elements but did not get an e-mail and do not have a registration # and need help getting one/

I have successfully downloaded Photoshop Elements 13. I did not receive an e-mail with the registration number but did get verification of email address. I have been through all the help sights and only reach dead ends. Help!

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

When I plug my Droid Incredible 2 into a car charger the phone is now permanently in"Car Mode" and won't get out. I heard that Droid will fix this, but it hasn't happened. Does anyone know how to fix i

I have a Droid Incredible 2 phone. I bought car charger and ever since I have used it, the phone thinks it is in "car mode" even when the phone is in my home, my purse,...I sets to speaker and I can not hear the phone ring. It freezes on "car mode". I heard that Droid is supposed to be fixing the problem, but nothing has happened yet. Is anyone else having this problem, and does anyone at Verizon know when/if this will be fixed. If not, I expect a new phone from Verizon.

there are two ways, usually if u restart the phone it will reset, but the other is going to your system and shut it off manually...

Unable to get page with video to validate and need help getting text to display correctly

I need advice on getting a page to validate that has a video. I didn't make the video, but all other pages vallidate that don't have it.
Also, when testing viewing on ie with large font view the navigation bar on the left doesn't display correctly. I've tried all fixes I can think of, but none work.
As always any advice is greatly appreciated.
page can be viewed at: http://www.lotusvalleydesigns.com/previewpages/services.html

Eeeeeuuuuu yuck. You know, I've never used that setting in IE and I don't think I ever will again.
Look what happens to CNN's website when you do that.
http://CNN.com
I think IE sucks and this is another fine example of MS's zeal to pile on user options that no one should use. If MS made their zoom feature optional the way Firefox does, nobody would ever need this atrocious "accessibility" option.
Good luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

I'm stuck in my settings app and can't get out, please help!

It's an iphone 4. It told me to make some more room and in storage and I did but not it won't let me out of the app! I can move around in it but it won't let me get to the home screen or lock it. I've tried holding down the lock button but it doesn't work. I'm freaking out badly, please someone help me!!!

Hold down the Home and Sleep/Wake buttons for 10-15 seconds or until the screen goes dark. Then, press and hold the power button to power it back up.
This resets the phone and it should work as expected once it boots back up
~Lyssa

Need help getting out of safe mode.

It is my mother's thinkpad model 1838A11, I downloaded games for her through google play store, the apps show up in the apps section in the settings but no where else. Can't find them or play them, then noticed down in the bottom corner it says safe mode, I have very little experience with tablets but safe mode doesn't sound good to me. Could someone please tell me how to get it out of safe mode or tell me what else the problem may be, I've shut it off and back on while holding volume up and other things, but safe mode still pops up.
Thanks.
Solved!
Go to Solution.

You are very welcome Ghoss! Thank you for using the Support forums
If you continue to have problems with the volume button do not hesitate to contact your support center. You can verify your warranty status here.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

I'm using Firefox 3.6.23 on my windows 2000 and lately i've been having issues with web pages loading and need help figuring out why.

Some of the issues : '''1'''. Page loads blank showing web address in tab. Try reloading usually with no results.(problem have the most!) '''2'''. Message appears "problem loading page, server not found" (diff times & diff websites). '''3.''' Pg with msg "oops link broke, DNS error, server not found" then lists suggested links to sites for fix though all links connect to site IGEARED.COM. (new issue) I don't know what to do please help me identify and fix my issue(s) in english, kind of a newbie : ). thx

Try this.
Type in the address bar about:config.
Accept the warning.
In the page that appears, in the Filter box, type network.http.max-connections. Change the value to 32 (which is probably set to 256 in your case).
Close that page. Restart the browser.

I believe I have a key logger and need help finding out.

I've seen various threads around here with some nice people helping to locate a keylogger on various version of Mac OSX... I'm hoping you can do the same for me!

Open Terminal and paste this line followed by pressing enter,
ps -A > process.txt
the file will appear in your home folder
open it, select all and copy, paste in a post here.

After logging on you yahoo this am, my calendar and notepad are gone. When I click on them I just get a blank screen. I am not very computer literate and need help getting them back.

When I usually go into yahoo mail, there is an icon at the top left hand side to access my calendar and notepad. They are both gone, but there is a field in the bottom left corner that has the buttons. When I click on either one, I just get a blank screen. I've not updated by Firefox to a new version and can't imagine what happened overnight.

This sounds more like it's a temporary problem with Yahoo's mail website. My advice at this point is to see if this fixes itself within a few hours. If not, please come back (actually, do come back regardless and let us know if your problem is solved).

I am stuck in text messging mode and need help getting out

Similar Messages

Maybe you are looking for