I am suddenly having trouble sharing the screen of my work iMac from my MacbookPro at home and visa versa

Neither appear in the shared section of the Finder of the other. This is despite the fact that both are set up with my AppleID and have screen sharing turned on. To make the situation more interesting I have another computer on my home network, an older mac mini. The home Mac Mini does show up in the finder as shared both at work and on my MacbookPro at home. It is set up in the same way as the other two. I can screen share my mac mini from work or my work iMac from the home Mac mini. I can even share the mac mini from the work imac and then share the macbookpro from the screenshared mac mini! I can also screen share my work imac from the mac mini at home.
I have checked my settings on all 3 computers and they seem to be exactly the same.
The home MacbookPro has OS 10.9.2
The home Mac Mini has OS 10.7.5
The work iMac has 10.9.2
This has been very frustrating and puzzling. Any help would be much appreciated.
Thanks!

Similar Messages

I can't unlock my ipod nano 4th generation. The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top.

I can't unlock my ipod nano 4th generation. The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top. What could be wrong?

Hi Saint09,
Thanks for visiting Apple Support Communities.
I'd recommend the steps in our iPod troubleshooting assistant:
http://www.apple.com/support/ipod/five_rs/nano4gen/
Regards,
Jeremy

To those perhaps having trouble getting the phone continuity to work...

Check on iPhone and Mac you have signed into iCloud and FaceTime with the exact same account - log out of them and back in to confirm. It wasn't working for me till I did this and it is now working a charm!

Have you used any plug-in type headsets on your Centro?
Do you hear any sound out of the speaker when you play an MP3 file?
There is a microswitch in the headset jack that can get stuck and make the Centro "think" it has a headset plugged in and this can cause the problems you are describing. You can try the following procedure to see if the headset jack is causing the problem.
Click on the following link for the forum post regarding this issue. Thanks to Super Contributer, DTfromBH.
http://forums.palm.com/palm/board/message?board.id=hardware&message.id=31143&query.id=113582#M31143
Post relates to: Palm i705

Having trouble with the move tool not working.... also I cannot seem to crop.... my cloud says I'm up to date, should I

I seem to be having all kinds of trouble with Photoshop CC2015 and CC as well.... I cannot use the move tool.
Also have a heck of a time cropping, will not let me select a crop, are there glitches I'm not aware of???

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am having trouble getting the blur tool to work. When I move the tool over the area I want to blur, nothing happens. Any ideas?

I am using the 100% setting

Could you please post a screenshot with the Options Bar, Layers and Channels Panels visible?

Everything from my desktop has disappeared and when i try and dragging it back to the desktop it doesnt work, everything from my desktop has disappeared and when i try and dragging it back to the desktop it doesnt work

everthing frozz and then dissappered

I'd try starting Applications/Utilities/Disk Utility and running Repair Permissions followed by Verify Disk
Bob

HT4528 I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

This Apple doc might help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

I'm having trouble using the safari. It won't open the screen stays black

I'm having trouble with the safari it won't open the screen stays black also apps won't open it just kicks me out

Try this:
Settings>Safari>Clear History, Cookies and Data

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

I also tried the Hard Restart and still has the problem?

Having trouble with my screen becoming larger than the phone supports. Can this be fixed easily?

Having trouble with my screen becoming larger than my phone supports. Can this be corrected without taking the phone to an Apple store?

The sign on screen (where the current time and the slide to unlock) and if I can get it to open, the next screen that show all the apps. Have been unable to get any further that that second screen. The screen contents appear to be about twice the size they should be. I have been able to "reset" the phone by turning it off, but the problem happening several times a day and now occasioanally the reset does not work. This just started happening about 3 days ago and is increasing in frequency. I have had this phone about 14 months.

Anyone having trouble sharing large images via email with Aperture 3 and OSX 10.7.2?

I am having trouble sharing images via email with Aperture 3. No matter what size I have in the preferences, the image is thumbnail size. The requested size flashes on the email a couple of times but the small size remains and is sent. I am using OSX 10.7.2. Any suggestions how I may send larger sizes?
oldgranddad

I have taught many how to use GUI-based computers. The number of controls they are aware of on the screen always progresses, usually linearly with the amount of time they spend actively learning the GUI. Beginners are totally flummoxed that windows can hide other windows. A step beyond that, they are amazed that they can resize windows using the mouse cursor. Those two are trivial to most users today, but they illustrate 1. that there is nothing "intuitive" about the GUI, and 2. that the amount one perceives is dependant on the amount one knows. IME, this has nothing to do with age, and everything to do with experience using a GUI.
Here is a good hint: if you are using a Mac and can't figure out how to do something, look for something to click. If you find something that seems promising, try "{Option}+clicking".
The interface is richer than any one person can master. Frank's statement "most times we all fail to see everything " is, imho, _always_ true. We never see everything, even in the grossly limited resolution of our computer screens.

I'm having trouble sharing my i pod list with my other computer. I authorized both computer's, but list is not showing up in my laptop. (2nd generation Ipod nano)

I'm having trouble sharing my Ipod list with my other computer. ( lap top) I authorized both computer's for home sharing but the list is not showing up on my laptop. My I pod is a second generation nano. So how do I get it to show up on my laptop?. Also I only have two computer's but it's authorized with 4, two were old computer's, how do I take them off the list without deauthorizing all 4 computer's,? Or do I have to deauthorize all 4 and then authorize the two I have now? my desk top pc is operating on vista, and my laptop is operating on 7. Does that make a difference? HELP! thank you.

iTunes Store: About authorization and deauthorization
iTunes 10 for Windows: Authorize a computer to play iTunes Store purchases
iTunes: Frequently asked questions about viewing and syncing videos
iTunes 10 for Windows: authorize
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows

I am having trouble viewing the entire content of a PDF opened with adobe reader on my ipad.

I am having trouble viewing the entire content of a PDF opened with adobe reader on my ipad. Mi am able to view the file in its entirety on my Mac but not on my ipad. I have tried saving it to acrobat but that doesn't work either. Any suggestions please.

Hi,
When you say the entire content, do you mean some parts of the pdf are not getting displayed or is it going out of the screen?
Please send a pdf you are having issues with on chmaheshatadobedotcom, it will help us investigating the problem.
-Charu

Having trouble sharing my folio with a client

I'm having trouble sharing my folios with clients. I clicked the share button and sent the e-mail to the client. They received the e-mail and signed up for an adobe account. When they try to log into Adobe Content Viewer on their iPad using their Adobe credentials they keep getting log in failed notices. Does anyone know why this is happening? Thanks.

After they log in and accept the terms they should be able to log into the ACV with that account and download the folio.

Having trouble with the most simple of things: Static IP

I am having trouble with the most simple of things: Static IP.
I am working in Windows Server 2008 R2 SP1.
"Control Panel\Network and Internet\Network and Sharing Center\Local Area Connections>Properties>Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6)"
IPv4: I have went to "ipconfig /all" and found the "preferred" IP Address and the Default Gateway.
Assign DNS Servers?
IPv6: I used "netsh interface ipv6 show address level=verbose" and found 3 usable IPv6 IPs.
Assign IP Address, Default Gateway and DNS Servers?

What is the question?
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I am suddenly having trouble sharing the screen of my work iMac from my MacbookPro at home and visa versa

Similar Messages

Maybe you are looking for