I am suddenly not able to update my aps.  Says that I need to be connected to US store, not store of country residing in.  Been here since July.  Not sure how I am suddenly not connected to US. How do I get back, reconnect?

I am suddenly not able to update my aps.  Says that I need to be connected to US store, not store of country residing in.  Been here since July.  Not sure how I am suddenly not connected to US. How do I get back, reconnect?

Launch the App Store App. Tap on the featured tab, swipe down to the bottom and tap on your Apple ID. Tap View Apple ID. Enter your password. Go to Country/Region and change the store in there.

Similar Messages

  • I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
    Troubleshooting on Windows
    If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
    Firewall issues:
    Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
    Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
    Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    The "hosts" file may be blocking the iTunes Store
    Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
    Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
    To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below.

  • I updated to Lion. Now when I preview a document, there is no Save As button, it is either Save a version or duplicate. How do I get back my Save As button?

    I updated to Lion. Now when I preview a document that I have in Downloads or Documents and I want to Save As, when I go to File, instead of Save As, I now have Save Version, then when I click on that it says the document is locked, do I want to unlock or duplicate? How do I get back to just plain ole Save As?
    I have no idea why the document would be locked. Help, please.

    Here is a normal Save menu in TextEdit, for example:
    Now with that menu visible in TextEdit simply press down the OPTION key and a Save As option should appear just below the Save option in the menu.
    Now, I may have forgotten since it's been a while, but that may not work in Lion. So either you upgrade, if possible, to Mountain Lion or Yosemite or:
    Select the Duplicate option which will open a new copy of your document. You may then Save that copy. When you do you will be asked to provided a new document name. This would replace Save As.

  • Hi. my daughter has an iphone 4s and she has forgotten her passcode and wont let her use it at all now. it says that it needs to be connected to itunes, but when i do.....it says that it needs the passcode. what do i do??

    Hi, my daughter has an iphone 4s and has forgotten her passcode, and it totally shut down her phone. it says to connect to itunes, but when i do that.....itunes says that i need the passcode. how do i fix this??? please help

    iOS: Forgotten passcode or device disabled after entering wrong ...

  • NX6600GT has no psu connection but it says that it needs to be connected to one

    Every time I load up Windows XP and popup comes up and it says that my MSI Geforce NX6600GT is not recieving enough power and needs to be connected to the power supply. But I have looked everywhere on this graphics card and there is no connection on it for a power supply. Can anyone tell me why this is happening becuase every game I play like F.E.A.R and Half-Life2 work perfectly.  My systems power supply unit is 450Watts and my Motherboard is a Asus SLI A8N SE. Should I ignore this popup or could leaving things the way they are damage my systems components in the longterm?

    you can rey updating to the latest Nvidia drivers:
    nVidia Drivers
    also, could you please post your PSU specs.
    regards.

  • HT1222 It is telling me to update my software and that I need Wi-Fi connection I have Wi-Fi connection it will not download and install

    I have update software that will not download or install it says I need Wi-Fi and I do I have tried several times

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My ipad is freezing up because it needs an icloud update. it says that tI need to have teh ipad plugged in, l,, lockerd and connected to wifi but I caocked and connected to wifi. I cannot connect to wifi because the ipad is frozen. How can I un freeze it?

    My ipad is freezing up because it needs an icloud update. It says that I need to have it plugged in to wifi. I can't connect to wifi because it's frozen. What should I do?

    If you have the 'this iPad hasn't been backed up' message then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When I purchased my Mac six months ago, I transferred my Quicken data to Quicken Essentials which has worked well for me until yesterday.  Now Quicken Essentials will not open the data file.  What happened?  How do I get back in?

    When I purchased my Mac six months ago, I transferred my Quicken files to Quicken Essentials.  That worked fine until yesterday.  Now I'm getting messages that there is not application to open the files, or that it just plain can't open the file.  What gives here?  What happened?  How can I get back in?

    Launch the Quicken application and try to open the file from there, if you haven't already. If that fails, and a simple restart of the computer doesn't help, try reinstalling the application. If that doesn't cure the problem, I would suggest you take this up in the Quicken Community:
    https://qlc.intuit.com/app/full_page
    or with Quicken support:
    https://quicken.custhelp.com/app/contact/plvl1/win
    You'll be most likely to get further help with your issue there.
    Regards.

  • How do I get back to original LR upgrade options?

    I just bought the LR3 upgrade and, when installing it, was asked whether I wanted to create  a separate LR3 catalog or merge (right word?) into existing LR2 catalog.  I looked in my applications folder and saw separate icons for LR 1 and 2 so I chose create a new LR3 catalog.  After it installed, I opened it and found:  a) no photos and b) no keywords.  I uninstalled and installed again but was not asked that particular question on the second install.  I tried importing from LR2 catalog but the keywords don't import.  How do I get back to the original option?  HELP.

    There are several options for you:
    a) either go to your applications folder and delete the newly created LR3 catalog - while LR is closed - and start LR again;
    b) or in LR3 go to >File >Open Catalog and open the old catalog;
    c) or in LR 3 with your catalog that shows nothing go to >File >Import from Catalog and navigate to your old catalog. With this option you could import first your LR2 catalog and then your LR1 catalog.
    WW

  • Icloud issue - my daughter hooked up her iphone to my laptop how do i get my information back

    My daughter hooked up her iphone 4s to my laptop, now i have all her information on my phone iphone 5, even siri thinks i'm her.  Her phone does not store my information, she still uses her phone without issues.  How do i get my icloud back, and start a new one for her?

    if you sync with itunes then you just resync then it should
    sync the calender, contacts and the likes back from the source you synch with in itunes

  • Forgot password and Secure questions and dont have a rescuemail... How do I get back in

    I not sure how.. But somehow I lost contact with my other iCloud account. i can't remember the questions and my pasword have been reset.... How do I get back in to the account...

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    Since you chose not to use a computer, your only remaining action is Recovery Mode per the instructions here.

  • Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i

    Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i update my ios? thanks Matthijs

    Get more information about your computer. Go to the Apple in the upper left corner of any window, then  "About This Mac".  Write down what it says about "version"and report that here.  Now continue to "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    If you have a PPC Mac you cannot sync your idevice without a newer computer.  See the end of this post for options.
    If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
    Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You can buy Snow Leopard at:
    Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After installing run the updater to 10.6.8, then upgrade iTunes.
    Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
    Options if you cannot upgrade:  iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there.  Backup your device directly to  iCloud over a wireless connection.  Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.

  • HT1222 I am not able to update my iPad to new version,needs any settings changes?

    I am not able to update my iPad to new version,needs any settings changes?

    How are you trying to update? Have you tried connecting your iPad to your computer running iTunes and update that ways? Please tell us what you have tried, what happened, and what if any, error messages you received.

  • Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    MaggySimpson wrote:
    Hi! I sold my Iphone on ebay.
    Follow the instructions to remove a device you no longer have.
    From here  >  http://support.apple.com/kb/PH13695?viewlocale=en_US

  • HT4623 When I updated my iPhone to iOS 6.1.3, somehow the iTunes App did not make it back to my iPhone.  So, I now have an iPhone without the iTunes App.  All other apps are on my iPhone.  How do I get back my iTunes App, so I can continue buying music an

    When I updated my iPhone to iOS 6.1.3, somehow the iTunes App did not make it back to my iPhone.  So, I now have an iPhone without the iTunes App.  All other apps are on my iPhone.  How do I get back my iTunes App, so I can continue buying music and flix?

    Check the General -> Restrictions settings and see if perhaps the iTunes app is turned off there. If not, the app may have been inadvertently moved to another home screen or dropped into a folder. Do a search for the app or try resetting the Home screen layout: Choose General > Reset, then tap Reset Home Screen Layout.
    Regards.

Maybe you are looking for

  • Windows Vista wont recognize any generation Ipod. Not charging unless windows is booted off.

    When I plug in any genration Ipod in windows, it dosent make the chime like other devices. Nothing is showing up in device manger, ITunes, or My computer. For all intsesive purpse it's like nothing is plugged in there. Also, it only charges when wind

  • VC Error: There are no BI systems defined in portal/ no authorization

    Hi, when trying to launch the BI integration wizard on an iview in Visual Composer in the ESA Discovery system I get the follwing error message: "WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must

  • .class to exe

    can i convert java class file to windows executable file without using the readymade softwares availabe in the market

  • Can I /dev/null my access log while running?

    I have a Directory Server 5.2 system running on Linux Red Hat. My access log is huge - 1.7 G in 2 days, using default logging. Can I manage this by copying the access log to another directory, then cat /dev/null > /sunusr/slapd-xxxx/access w/o negati

  • Bluetooth G5

    Hi All! First post, so go easy on me please! Couple of questions I would like some input on if you have the time: 1. I was thinking of getting the Mighty Mouse (bluetooth) & have figured that I need the optional module (I have looked in the system pr