I am sure there's a simple answer to this newbie question

Hi group,
I am trying to burn my movie for my DVD Player.
I am using PAL format.
I edit the movie in Pinnacle Studio.
I imported it into Encore.
I try to burn a project 1.8 Gigas in Size and no problem
I try to burn a project 2.0 or greater and it won't work!!!
I am using DVD R/W
I am sure there's no problem with the DVD Burner because I am able to
burn a DVD movie using Nero onto a DVD R disc and no problem.
My Burning speed is 1X.
I have a machine built for editing: 2 giga of memory/ A8N-SLI premium
Mother board / AMD 4200+ processor / 700 gigas of hard disk, etc
How do I solve this problem?
Thanks in advance for any help.

I am using MPG 2 as a source for my movie.
It won't work means that I appear to burn it successfully but when I go to the DVD player, it movie skip, drags after about half way through.
If I burn the smaller sized file It will play well throughout but I need
a 3.5+ capacity.
Thank you.

Similar Messages

  • I'm sure there's a simple answer...Copy/Paste InD to PS pixel shift...

    Howdy, I'm copying from indesign and pasting intophotoshop, and the 'pixels' keep shifting--I'm using points as the measurement in inDesign and would think they would translate to the PS pixels but not so much. Is there a setting to turn of anti-alaising or something  on paaste? Are the units of measurment just a hair of enough different that it causes issues?
    Thanks in advance,
    -Ted

    Thanks Bob, was doing that, seems that it's juts an error ID-ten-T, if you know what I mean (user )
    just sorted it out...
    Seems my default in PS for placing the object from the clipboard is set to W: 101.7% H: 110.0% instead of 100%/100%.
    Putting it back to 100% fixed it.
    *sigh* there goes an hour 
    Thanks anyhow.

  • I am sure there is a simple answer... but why can't I find where my extension is after install?

    Hello,
    I downloaded KT-ly 's 151 shapes and borders, tried to instal them, but when I open my PS I can't find anywhere. I can find my other downloads under brushes and actions, but not this one... where should i be looking??
    Also, on another border download, which installed the borders under the brushes (??) I can only change the color of the inside of the image, but the outline stays in black??
    I am new to this!!
    THanks!

    slfranchuk11 wrote:
    I am new to PS, and have spent the day learning.
    I am not new to Photoshop, have spent the last six years learning, use the application for at least about fifty hours per week, and I feel that I've barely scratched the surface.
    slfranchuk11 wrote:
    I can't find any 'shapes', how would I get to that menu?
    Not a "menu".
    Go to the Tools panel, select custom shape,
    then:

  • How to i get past the settings screen when trying to view my photostream? I just get stuck on the iCloudPhotos Settings page and can to any further.  Really annoying and i guess there is a simple answer to it? Can anyone tell me?

    I can't view my photos on my TV using AppleTV. This is because when I get to the iCloud Photo Settings page and turn on My Photo Stream,there seems nowhere else to go to look at my photos.  I guess there is a simple answer! Can anyone help.....please

    artschic:
    Welcome to Apple Discussions.
    Congratulations on your new MacBook Pro. You'll love it.
    In terms of your PowerBook G4, apparently your Hard Disk Drive has failed completely and I am not sure what else it wrong.
    First, try this:
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately hold down Shift key to start up in Safe Mode.
    • Log in and empty Trash.
    • Restart normally and log in.
    If that does not work try Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    If still no dice, try the procedure outlined in the article Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
    cornelius

  • I'm sure there is an easy answer out there somewhere - How do I import an address book from Windows Live to my Mac?

    I'm sure there is an easy answer out there somewhere - Can anybody tell me how do I import an address book from Windows Live to my Mac?
    Thanks

    http://www.freeemailtutorials.com/windowsLiveMail/addressBooksAndContacts/export Contacts.htm
    Explains how to make a vCard from Windows Live.  Apple's Addressbook supports this format.

  • I'm sure there is a simple fix...but I'm stuck!

    I'm sure there has to be a simple fix to this, but I can't
    for the life of me figure out what it is.
    I am trying to use an Accordian Widget to make a navigation
    bar. So far, all is going well EXCEPT ...
    For my last three tabs, I want to have tab labels (which will
    eventually have links), but they will not have any content below
    them.
    I have the "guts" working okay. I will be adding links to the
    tab labels and the line items under the content.
    But first I need to figure out how to make it so that the
    last 3 menu bar (e.g., Frequently Asked Questions; Contact Us; and
    About Us) have the tabs, but when you click on them you don't get
    the space underneath where the Content should be.
    You can see the example I'm working with at:
    http://www467.pair.com/redjeep/foo.php
    If you need to see the CSS file, let me know and I can send
    it.
    Thanks in advance for any suggestions!
    PS I'm a newbie. But I've spend a lot of time searching
    through forums and though I've found answers to a lot of my
    questions, I have yet to figure this one out!
    Kimberly

    Hi Kimberly,
    Since your link tabs are at the bottom of your navigation
    bar, a possible solution for you is to place your links *OUTSIDE*
    the accordion markup, and just style them to look like the
    Accordion tabs. That is, they don't have to be part of the
    accordion, just look as if they are.
    --== Kin ==--

  • My Iphone 4 has slightly zoomed in and I can't see the whole screen. I am sure there is a simple solution.

    My Iphone 4 has slightly zoomed in on the screen and I can't see icons on bottom or read whole screen. Can somebody advise, I am sure a simple solution?

    This is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I cant find a simple answer to this question.

    I get this stupid error when running an applet:
    java.lang.NoClassDefFoundError: website (wrong name: website/website)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:403)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:10
    1)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
    at java.net.URLClassLoader.access$1(URLClassLoader.java:216)
    at java.net.URLClassLoader$1.run(Compiled Code)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Compiled Code)
    at java.lang.ClassLoader.loadClass(Compiled Code)
    at sun.misc.Launcher$AppClassLoader.loadClass(Compiled Code)
    at java.lang.ClassLoader.loadClass(Compiled Code)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:110)
    at java.lang.ClassLoader.loadClass(Compiled Code)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:363)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:532)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:468)
    at sun.applet.AppletPanel.run(Compiled Code)
    at java.lang.Thread.run(Compiled Code)
    i cant find a simple answer to fixing this, where hav i gone wrong?
    Below is me HTML:
    <APPLET
    CODEBASE = "C:\JBuilder3\myclasses\"
    CODE = "website.class"
    NAME = "website"
    WIDTH = 400
    HEIGHT = 300
    HSPACE = 0
    VSPACE = 0
    ALIGN = middle
    >
    </APPLET>
    below is part of me code:
    package website;
    import java.awt.*;
    import java.awt.event.*;
    import java.applet.*;
    import javax.swing.*;
    public class website extends Applet implements Runnable
    Thanks in advance

    The simple answer is that by putting your class into the package named "website", the java runtime program looks for a directory called "website", which it is apparently unable to find. Try removing the package statement and recompile.

  • Can anyone answer me this 2 questions, thx verymuch:)

    *Write a method which takes as input a List<String> of words, and returns a List<String> which contains the words in the input list in order of frequency (most frequent word first).  For example, if the input list was
                   ("the", "big", "dog", "the", "dog", "the")
              then the output list should be
                   ("the", "dog", "big")
              "the" is first because it occurs three times in the input; "dog" is second because it occurs twice; and "big" is last because it only occurs once.
    *How fast is your method?  Report this as an O() (order), eg O(N) or O(logN) (where N is the number of elements in the input list).  Justify your answer.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    lee888 wrote:
    can anyone answer me this 2 questionsYes, quite a few people here can. None of them will (or at least should), though.

  • Can't open files exported for Soundtrack - I'm sure there's a simple fix.

    I have a clip from a movie that I'm trying to score. Exported it for soundtrack as aif, wav and mp3 files. When I go to open them in ST, they're greyed out.
    I just need one version to open.
    Any help would be appreciated.
    -Waddy
    Using ST 1.2 and FCP 4.0 on a G4 Powermac

    I am not sure what you mean but try and get the sound track to iTunes then drag the file to the desk top and import from there. Is there sound on the clip now? Are you sure they are Aiff files? Maybe check when the soundclip is in iTunes.

  • I know there's a simple answer

    Hi ...
    New to this software, Life Cycle 7.1. I was able to design the form rather easily. Previewed the form. Sent it as an email attachment (the file came through as a .pdf) to someone who was able to fill in the form very easily.
    When they clicked the "submit" button, the file attached to the email as a .xml format. The file comes through as an .xml format. When I receive the email and try to open the file, it goes to a web page with each field listed.
    I want it to open in the pdf format in which it was created. How is this accomplished? If this is not possible, how can I use the web page information?
    Thanks
    Sandee L. Hill

    Change the "email submit" Button to a regular button.
    Under the submit tab, change "submit as" to PDF. change the button text to "Submit" DONE!

  • Can I have some simple answers for a newbi Mac user!!

    I've just added some photo's in Iphoto 08 of my holiday which was about 3GB from my pictures folder, Now by importing them into Iphoto is kind of taken up 3gb of my memory from my hard drive.
    So 6gb in total for my pictures which seems to be a waste of memory..
    I thought Iphoto may just take the info of each photo as a resource not actually copy the photos, Anyway what;s the best solution on storing image's and using as little memory as possible if there is a way at all.
    Or is doing what i'm doing the best way? I mean what would be the down side of once importing to Iphoto deleating my photos from my pictures folder?
    Sorry for my basic questions but i thought you guys would be the best peeps to ask
    all the best
    MBPG

    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    No, iMovie works differently. Best to ask on that forum.
    Regards
    TD

  • Simple answer needed to complex question

    I said "simple" because, although a Mac user for many years, I have no knowledge of the tech angle (which gets me in trouble regularly.)
    In the last few days, my Safari started getting very slow on my iMac. I searched the forums and saw a suggestion that I discard a couple of files as well as "start in a safe mode" which required I do a restart with the shift key depressed.
    Here is where the strangeness began. Upon a restart after the safe mode, it would fire up, then after a minute or so, it would shut down. This happened a number of times.
    This is what I did: I started from my install disk and it fired up fine. I ran Disk Warrior and it resolved some issues, but said I had problems that could not be corrected.
    I had installed Application Enhancer a week or so ago and had no problems with the restart.
    Yes, I do have a number of 3rd party things, but have not suffered the failure to start that I now have.
    I guess my question is this: Have I done something that cannot be undone by starting in "Safe Mode" and if so, how do I undo what has been done? Also, what is safe mode and could it have corrupted something?
    By the way, I do not shut down any more or restart. I just let it sleep so that it will continue to run.
    Please, any suggestions (other than the obvious "reinstall Leopard") would be greatly appreciated.
    Thanks in advance!

    Which iMac do you have (would be helpful if you updated your signature)?
    I just recently read a post where several people had major problems with Applications Enhancer and needed to uninstall that app to get rid of the problems.
    When you ran Disk Warrior, what exactly did it fix and what were the problems that could not be resolved? Can you post or copy the screenshots/messages?
    Here's a link to the Apple article explaining safe mode:
    http://support.apple.com/kb/HT1564?viewlocale=en_US

  • Need a quick simple answer to this question please

    Hi all,
    Well. Today I'm going be signing a new contract with AT&T because I'm done with T-Mobile. Never have service when I need it!
    I really want to get the iPhone.
    My question is...Do I need to buy an extra package with AT&T to activate the internet and e-mail on the iPhone or can I use it right out of them box???
    I'm asking because I know with all companies you need to add that internet and e-mail package to get access.
    Thanks for the help

    When purchasing an iPhone 3G new, activation with AT&T is required at the store when the iPhone 3G is purchased, and the unlimited data plan for the iPhone 3G is required as part of the activation process.
    The cost is an additional $30/mo over your chosen calling and SMS plan, and is unlimited.
    This is AT&T'a standard unlimited data plan rate for all phones in the smart phone category regardless if such a phone is a 3G phone.

  • I hope you know the answer for this "easy" question

    I created a package for my JSP and import it to be used in a JSP. It works great, but for some reason, it displays an error message saying it can't find the class in import. Can anyone explain that? Thanks.
    null

    Have you "registered" the class in the JServ.conf file in the JServ directory under the Apache install? The JServ engine will not know where to find the class that you want if it is not in any of the paths that were set up suring the install (CLASS_PATH environment variable). To register a class, look in the file for directives named wrapper.classpath= . Add the jar file that contains the class that you wish to use. This should fix your problem.

Maybe you are looking for