I am trying now to Upgrade the UCS from 1.2 to 1.3

I am trying now to Upgrade the UCS from 1.2 to 1.3,
I follow the Procedure and guide , the guide said that the IOM staus should be Opera
bel , I have only Fabric A and no Fbraib B , and I connected The chassi to single IOM status operable, the a
the other IOM is saying accessibily proplems since no connectivity I have no Fbaric B. the guide said all IOM should be operabel.
now I send an FSM to reset the IOM but it is not function just retry .... you can find the tech support
are they any suggestion I am not sure to continue...

Thanks Jermey , it was really helpfull, now I am running the UCS with 1.3(o) version.
I have the ability to make the fisrt 8 port in UCS 6120Xp in 1 Gpbs but unfortunately
when I enabled port 2 for 1 Gpbs it show me failed link, please notice that the other upstream switch is
6513 catalyst have one port 1 Gb and I asked the admin there to enable the portfast and dot1q on the port , but i am not sure he do it.
the uplink on UCS shows failed , linked down and the properties of port is trunk.
is it necessary to have the upstream switch edge port work in fastport and dot1q  mode ???
regards

Similar Messages

  • I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen.  Has anyone else had this problem?

    I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen.  Anyone have any suggestions?

    From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

  • ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

    Hi,
    I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
    After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
    ORA-03113: end-of-file on communication channel
    Process ID: 20826
    Session ID: 170 Serial number: 3
    I am getting the same error when trying to create the new database using "DBCA".
    Please provide me the probable outcomes.
    Thanks
    Amith

    Below entries found in alert_orcl.log file
    MMNL started with pid=15, OS id=20571
    starting up 1 shared server(s) ...
    ORACLE_BASE from environment = /u01/app/oracle
    Thu Dec 03 20:11:11 2009
    ALTER DATABASE MOUNT
    Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
    ORA-27103: internal error
    Linux-x86_64 Error: 11: Resource temporarily unavailable
    Additional information: -1
    Additional information: 1
    MMAN (ospid: 20557): terminating the instance due to error 27103
    Instance terminated by MMAN, pid = 20557
    Below entries found in the Trace file generated
    error 27103 detected in background process
    ORA-27103: internal error
    Linux-x86_64 Error: 11: Resource temporarily unavailable
    Additional information: -1
    Additional information: 1
    *** 2009-12-03 20:11:14.727
    MMAN (ospid: 20557): terminating the instance due to error 27103

  • Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

    Dear SDN,
    We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
    Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
    Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
    Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
    Thanks n Regards ,
    Anantha Raman E.

    Thanks Mr.Mohan
        We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
    Pls help us in this regard
    Whether we have to migrate or what...

  • I've upgraded the Discoverer from release 4 to 10.2.0.3

    Hi guys,
    I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
    the difference between the two test system is that one is SSL enable and the other one is not.
    On the test system that is not SSL enabled users can access Discoverer via EBS fine but
    on the tests system that has SSL enabled users cant so now they have to go directly to
    the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
    for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
    How can I get Discoverer to through EBS when SSL is enabled.
    Thanks

    Hi,
    Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
    Rod West

  • Is their any other Processor better then a 2.9ghz intel core i7 that i could look into. I'm looking to make the computer faster & already upgraded the memory from 8GB to 16GB not realy noticing a difference

    Is their any other Processor better then a 2.9GHZ Intel Core i7 that i could look into. I'm looking to make the computer faster & already upgraded the Ram from 8GB to 16GB and i'm really not noticing any difference actually it seems to be the same as it was before. Any help with this?

    You will only notice a performance improvement if you haven't got enough RAM to use the applications you need. If you had a lot of free RAM before, you won't notice any difference now.
    If you already have your computer, you can only replace the processor if you replace the logic board. Your computer requires a specific logic board, so you shouldn't replace it and you have to stay with the same processor. Apart from RAM, the only part you can upgrade is the hard drive. What will make an improvement is a SSD drive, if you haven't got one

  • Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

  • My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
    The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
    Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
    Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
    Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
    If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
    Thanks,
    eidnolb

  • I have blocked a sites for view the picture. But I want now to view the picture from this sites. How do I unblock the site again???

    I have blocked a sites for view the picture. But I want now to view the picture from this sites. How do I unblock the site again???

    With the site on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see https://support.mozilla.com/kb/Images+or+animations+do+not+show
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

  • The Apple  store reinstalled completly the OS this morning on my Mac , I have now to restore the data from  the time machine . I have done it but its going on for already 2 hours and it continues ; Shall I wait ? and how long ,?

    Question : The Apple  store reinstalled completly the OS this morning on my Mac , I have now to restore the data from  the time machine . I have done it but its going on for already 2 hours and it continues ; Shall I wait ? and how long ,?

    Let it alone. No one can tell how long it will take as that is a function of your data.
    Barry

  • Will it be possible to upgrade the software from LR 4 to LR 6?

    I own  LR 3 (full) and LR 4 (upgrade). Will it be possible to upgrade the software from LR 4 to LR 6 directly?

    In the past,  the upgrade version of Lr upgraded all versions from v1 onwards, and I see no reason why this should not be true this time, but can make no promises, mainly because I have no connection to Adobe.
    So yes, you will probably be able to do as you want.

  • Upgrade the OS from Maver to Yosemite.. message "There is no enough disk space available to install this product". Please help.

    I have 5.12gb space on my Macbook Air (Mid 2012). But when i attempt to upgrade the OS from Maver to Yosemite, i get a message "There is no enough disk space available to install this product". Please help

    You need to temporarily free up additional drive space - the Yosemite download itself is just over 5GB and then it needs more space to install it. Once the new OS is installed the installer will be deleted. Music and movie files are large and will be the most convenient files to remove to an external drive.
    On another note it isn't a good idea to try to run the computer with so little free drive space. Look for files you can offload to an external drive permanently. For example, I keep my music and movies on an external drive. You can keep a small assortment of music on the computer but save lots of space by keeping the regular media library off the computer.

  • Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

    Hi,
    While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
    We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
    So anybody could give suggestions on this.
    Appreciate your help
    Thanks,
    Suresh

    I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
    Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
    The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
    Best regards,
    Erik

  • MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

    I am running a 2 node DAG with separate Hub & CAS servers
    I have already upgraded the Hub CAS server and they are fine
    Exchange running on Windows 2008 R2 SP1
    All are in VM-Ware ESXi 5.0
    After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
    If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
    But again after reboot they do not start
    Also I get the below event in the app log when the IS & SA fails to start
    Log Name:      Application
    Source:        MSExchangeIS
    Date:          05/22/2012 5:15:03 AM
    Event ID:      5003
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      server.domain.com
    Description:
    Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
    configured and  is currently online.
    If I check the Registry for time resource it is taking from the DC
    I manually compared the time between DC and Exchange and it is fine
    Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
    Checked for group policy and do not find any specific to time sync.
    Confirmed that Windows Time service is running
    Suspecting a Operating system issue, tried to upgrade the other DAG
    Even that node is displaying the same symptom and Issues
    Tried to install RU1 on both nodes and that too did not fix the issue.
    Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
    Is Anyone have come across the issue before ?

    Exchange 2010: Unable to initialize the Information Store
    Problem: 
    Unable to initialize the Information Store service because  the clocks on the client and server are skewed.   This may be caused by a time change either in the client or the server,  and may require a reboot of that computer.   Verify that
    your domain is properly configured and  is currently online.
    Solution: 
    Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
    Run this command
    Net time \\ADServerName /Set
    Restart the Microsoft Exchange Active Directory Topology Service
    *Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work..  I tried just starting the Information Store service after running the command it it still failed..
    This worked for me and all is well on my exchange server.
    - See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

  • Upgrade the DB from 2007A to 8.8  PL 10- Error in Fixed Assets Master Data

    Dear Expert,
    we r using smoothly Fixed Assets Add-on in 2007A environment, Now we are upgrade to SAP B1 8.8 SP00 PL10. When i view  the Fixed Assets Master Data by choosing from List Its shows all of my master data list, but when i select any of them system shown nothing in FA Master Data form , please guide
    Tahir

    Hi,
    I think the addon is corrupted. have you reinstall B1 addon ? if you have reinstalled but it is still as same, I suggest to upgrade the B1 version and the addon to the latest i.e. SAp B1 8.8 SP00 PL16. You can also log a message to SAP support but test this case first in the SAP B1 8.8 SP00 PL16 environment.
    JimM

Maybe you are looking for