I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

Can someone please help me?
I am trying out Final Cut Pro X on a 30 day trial. So far so good.
I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
Can anyone please enlighten me.

The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

Similar Messages

  • Final cut pro crashed and I can't find my project when I reopened it

    I did my edit in the timeline.  Everything was working great.  I got 58 minutes of video edited.  THen I went to open one of the transitions - got the beach ball and then FCPX crashed.  No problem I thought, I'll just reopen and everything will be back where it was - NOT!  I can't find my edit.  Arrggghhhh.  Can anyone help?  I am, obviously, a real newbie to FCPX.
    Thanks so much!
    Mary

    I found it!   Thanks anyway!  You are all such a big help - just having you out there makes me feel like I can do this.

  • In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section.  After doing so, I received a message that my event is already open with the same identifier as the new one I just creat

    In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section.  After doing so, I received a message that my event is already open with the same identifier as the new one I just created on the new disk.  It says the second document cannot be opened and to move one of these documents out of your Final Cut Events folder.  It also says to avoid this problem, copy events from within Final Cut Pro, but that is what I did in the first place.  What should I do to avoid the double opening conflict?

    What exactly are you doing and what version are you using with OS X 10.8?

  • I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    I believe there is no  "Export to Tape"  feature as appeared in legacy FCP.
    SORRY! Just noticed you are using FCP 6.
    You need to ask this question in the Final Cut Studio forum.
    Message was edited by: Ian R. Brown

  • I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

    I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

    Yes.  A couple of ways that might work.
    First Way
    What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence.  Does it display correctionly? 
    OK, select the clip in the hd timeline and copy (command-c).  Now go to the HD sequence with the material that's distorted.  Select all (command-a) and paste attributes (option-v) and choose basic motion and distort.  That should maek things work.  What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence.  That I'm pretty sure you'll have to redo.
    Second Way. 
    Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline.  You then should be able to reconnect these clips with your original HD media.

  • MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

    HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

    Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

  • Final cut pro 7 and AVCHD import ?

    Just got Final Cut Pro 7 and I can't see wether or not that it is able to import natively Sony AVCHD video. I know its probably just me, so much there to see and learn.

    Hi -
    In FInal Cut Pro, go to the Help menu and open Final Cut Pro Help.
    Once it is open, search for "Working with AVCHD".
    The chapter will tell you all you need to know.
    MtD

  • Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

  • TS1846 I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences.  So, where could be the file ?

    Digital Rebellion has you covered: http://www.digitalrebellion.com/prefman/

  • How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    Go to the Info inspector for the still image and in settings select the alpha type.

  • Final Cut Pro x and Compressor 992 hour to process

    I edited a 1 hour-40 minute video, on Final Cut Pro X and processed using Apple's Compressor.
    I have tried different Operating Systems (Mavericks and Mountain Lion) on two different Mac Computers.
    IMac 2.8 Mhz and Mac Book Pro (both 2008)
    It has been transcoding to create video to run on Apple Devices, for over 6 days now, and it shows that it will take 992 hours to process.
    The same video, some months back, with Mountain Lion, took a couple of days to process.
    Question: Why is it taking this long now?
    I have tried to get a DVD done, different types of output; none have succeeded.
    I guess Apple, has made adjustments to their Operating Systems, to basically render this computers inoperable, forcing customers to buy their latest Mac models.
    Yes, I went to the "Genius Bar" at Apple (twice), first they told me to increase the memory, which I did; even though months ago I had videos processed without extra memory.
    The second time at the "Genius Bar", after I had installed extra memory, they had nothing to say, except that "they had a friend" with the same problem, but after "the friend" bought a new Mac, the problem was resolved.
    I called Apple support and was told to "reset PRAM", which I did. Still the problem persists.
    Any ideas?
    http://www.flickr.com/photos/brankoab/12089286396/

    You don't mention how much RAM is in your machines, nor what are the versions of FCP X and the OS.
    These can make a lot of difference. If you are trying a long export with very little RAM (and I must say 4GB is *very little* RAM), then it can get bogged down tremendously. Do you have at least 8GB?
    How much free RAM is reported in Activity Monitor?
    Are you using Mavericks or a previous version of the OS? Mountain Lion was notorious for slowing down to a crawl in such circumstances.
    Give us more info, so we can better help.
    In the meantime, you might consider exporting just a small section of the movie (use I and O to mark an in and an out point in the timeline) and see how fast it goes; keep Activity Monitor open while you are doing it.

  • Question about Final Cut Pro X and miniDV's

    Hi,
    I'm thinking in buying Final Cut Pro X and use it to import and edit many hours of footage that I have on miniDV's tapes.
    I've heard that to work with miniDV's, Final Cut Pro X is not great, especially regarding timecode, etc. True?
    Any thoughts and advises? Many thanks!

    My experience is if you're shooting SD then you shouldn't have a problem unless you are trying to load a full hour. When I tried that, the computer went crazy and loaded the video as thousands of clips just a few frames long.
    That was supposed to be for a multicam shoot. I went back to FCP 7 where I've never had a single problem after at least 80 multicam projects with as many as eight cameras.
    I'll have to try it again in FCP X now that there have been two updates since my last try.
    I've also used HDV mini DV tapes shot with a Canon HV40. The video looked great in FCP X and I had no problem with clips that were 2-3 minutes long.
    I did not load my HDV clips as ProRes in FCP X because, when I did try it, they looked like total crap. I was afraid my finished exported video would also look like that.

  • Final Cut Pro X and 7 on same system

    I am using Final Cut Pro 7 and I was not very keen on Final Cut Pro X when I tried it out.
    However, I have just learned that it could be advantageous workwise if I am prepared to work on some FCPX projects.
    I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
    I know that in the past (and I mean the distant past) I have had problems trying to run different versions of the same software in the same machine and I'm too comfortable with FCP7 to just leap into working with an application about which I got an unfavourable impression and which many fellow professionals have told me instigated a move to Premiere.
    Can somebody give me some definitive advice, please?

    Alf Megson wrote:
    I
    I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
    Yes it's safe and no they don't use same plug-ins.
    I'm running FCS3 and FCPX, Motion5, Compresor 4 on two systems. No problems.
    Bets would be to follow these steps – the same start-up explanation.
    Russ

  • Final Cut Pro X and Videocam compatibility

    I am ready to upgrade to Final Cut Pro X AND to buy a new videocam.  I like the features of the Canon Vixia HF S30 (especially the viewfinder, not available in cheaper cameras), but neither Canon nor Apple will reassure me that this camera is compatible with Final Cut Pro X.  Has anyone tried this camera with this software?
    Thanks.
    Grandma C

    What we need to know:
    The Mac model, how much RAM, type and specifications of graphics card, version of Mac OS X, amount of free space on the main drive, version # of FCP or FCS that you are attempting to install, with a list of the disks included in the box.

  • Final cut pro X and OS Yosemite

    Asking if compatibility between Final Cut Pro X and OS Yosemite is checked or will be a new update coming out?

    FCP X on 10.10 has been solid here.
    Russ

Maybe you are looking for