I am trying to allow inbound remote desktop and drive mapping in a windows environment and want to know if the following will wo
access-list ICS-GTECH_access_in permit tcp host 10.2.6.200 eq 3389 host 192.168.130.5 eq 3389
access-list ICS-GTECH_access_in permit udp host 10.2.6.200 eq netbios-ns host 192.168.130.5 eq netbios-ns
access-list ICS-GTECH_access_in permit udp host 10.2.6.200 eq 139 host 192.168.130.5 eq 139
access-list ICS-GTECH_access_in permit tcp host 10.2.6.200 eq www host 192.168.130.5 eq www
access-list ICS-GTECH_access_in permit tcp host 10.2.6.200 eq https host 192.168.130.5 eq https
No it won't work because your source ports are the same as your destination ports and most connections don't usually work like that ie. your source ports are random.
In addition there is no mention of NAT rules although you may or may not need them depending on what you are doing currently.
Also can't guarantee it would work in terms of the ports but a quick internet search is all you need for that.
Jon
Similar Messages
-
I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. I originally started using iTunes on my PC so it has everything I have ever purchased or uploaded from my own collection of music.
How can I do this to ensure all videos and music transfer over and not just purchases? Do they do it at the Apple Store or at Best Buy? help!Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Also, See here if you need to... iTunes to an External Drive
http://support.apple.com/kb/HT1751 -
I'm trying to run a .jsp page and all I get is the following error. Thoughts?
Running Coldfusion 8 / JRun 4 updater 7 / Coldfusion 8 hotfix
2.
I'm trying to run a .jsp page and all I get is the following
error. Thoughts?
Could not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
jrunx.compiler.JavaCompiler$NoCompilerFoundException: Could
not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
at
jrunx.compiler.JavaCompiler.outProcessCompile(JavaCompiler.java:474)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:132)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:100)
at jrun.jsp.Translator.compilePage(Translator.java:176)
at jrun.jsp.Translator.translate(Translator.java:254)
at jrun.jsp.Translator.translate(Translator.java:101)
at jrun.jsp.JSPEngine.translateJSP(JSPEngine.java:707)
at jrun.jsp.JSPServlet.translate(JSPServlet.java:125)
at jrun.jsp.JSPServlet.service(JSPServlet.java:113)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)You're right, that ws another fix I tried. There is no fix fo
rthe issue described, but it still seems like an old issue. My
class paths are short. Here is my jvm.config (pretty standard):
# VM configuration
# Where to find JVM, if {java.home}/jre exists then that JVM
is used
# if not then it must be the path to the JRE itself
java.home=I:/JRun4/jre
# If no java.home is specified a VM is located by looking in
these places in this
# order:
# 1) bin directory for java.dll (windows) or
lib/<ARCH>/libjava.so (unix)
# 2) ../jre
# 3) registry (windows only)
# 4) JAVA_HOME env var plus jre (ie $JAVA_HOME/jre)
# Arguments to VM
java.args=-server -Xmx1000m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=256m -XX:+UseParallelGC
-Dcoldfusion.rootDir={application.home}/
# commas will be converted to platform specific separator and
the result will be passed
# as -Djava.ext.dirs= to the VM
java.ext.dirs={jre.home}/lib/ext
# where to find shared libraries
java.library.path={application.home}/lib,{application.home}/servers/cfusion/cfusion-ear/cf usion-war/WEB-INF/cfusion/lib,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/W EB-INF/cfusion/jintegra/bin,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB -INF/cfusion/jintegra/bin/international
system.path.first=false
# set the current working directory - useful for Windows to
control
# the default search path used when loading DLLs since it
comes
# before system directory, windows directory and PATH
java.user.dir={application.home}/../lib
# JVM classpath
java.class.path={application.home}/servers/lib,{application.home}/lib -
Trying to download microsoft remote desktop and it keeps failing
trying to download microsoft remote desktop from the app store and midway through the install, i get a message that app failed to download and to try again from purchases, that also fails.
It happenned to me, too. I talked to apple support on the phone, and they helped me to get it download. which turned out to be a waste of my time because the microsoft remote desktop app doesn't work to begin with. even when it downloads, it will crash. it is just a buggy/ faulty program.
-
i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp
Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L -
Apple Remote Desktop and WildBlue Excede
I am trying, without luck, to get Remote Desktop to work with WildBlue Excede. Can port forwarding be established with their Surfbeam2 Satellite Modem? If so, what are the port numbers, and how is it done?
Has anyone had success in setting up Apple Remote Desktop and WildBlue?
WildBlue Technical Support said they do not provide static IP addresses, so it couldn't be done. Something tells me that is not true.
Has anyone had any luck with WildBlue?
Many thanksHi Paul,
Are you trying to connect to a computer that's connect to the internet with wildblue excede? or are you trying to connect to a computer some where else while your connect to the internet with wildeblue excede?
Ether way, have you considered an altertive solution? For instance LogMeIn? -
Hi.
I need to use a smart card while working with remote desktop.
My office pc runs win XP and have a smart card connected. I can not use that card when working remotly, its not found. Like its disconnected.
I also have a smart card connected to my Mac at home. The smart card works fine when the VPN connection ask for my code.
The problem is that it does not get forwarded. I have tried to use MS Remote Desktop for mac and CoRD.
But none of them supports the smart card.
It works fine with parallels/win7 on my mac, I can then use my smart card.
How ever I would like to not use the win/ on my mac.
Do anybody have a soulution to this? Are there any Remote desktop applications that support forwarding of smart card for Mac OS?
Thanx for any tipsYou can install rdesktop with Smart Card support.
It is fairly easy if you use something like MacPorts, Fink, or Homebrew.
I know MacPorts has a port for it that I used in the past. -
Dear All,
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I cannot access this IP address via Remote Desktop. Any Ideas?
HarryHarry Ringwood wrote:
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I suppose you mean you're trying to connect to your Mac from outside your LAN. The address you see in the Network panel of System Preferences is a LAN address. To make what you want to do work, (1) from the remote computer you're going to have to specify the WAN address of the AirPort Extreme and (2) configure the AirPort Extreme (via port mapping) to pass the Remote Desktop signals to your iMac. To see the port mapping settings, in AirPort Utility look at the Advanced panel. -
Apple Remote Desktop and controlling over VPN
Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
ThanksYeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN. -
Remote Desktop and Snow Leopard Server
What is the best way to use Remote Desktop with Snow Leopard Server?
I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
The mac mini server will basically be nothing but a server.
I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.
-
remote desktop and apache.
There are times I feel that someone is looking over my shoulder, and changing my settings and controlling me.
I would like to at least be able to communicate with them so I can ltarn. I also want to be able to monitor and have some say so as to what they are doing to my computer.
Thank youThanx for your reply.
I should have stated that this is my personal computer and if any one should be the administrator I would think it would be me. -
Only Remote-Desktop and Replication with 0.0 Reduction
Hi guys,
I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
( All Traffic 53% of Reduction).
I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
using too RDP with crypto/compacted.
But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
I'm using all the Default Classifiers in Replication Application
Double-Take LZ+TFO+DRE 1100, 1105
EMC-Celerra-Replicator LZ+TFO+DRE 8888
MS-AD-Replication1 LZ+TFO+DRE UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
ms-content-repl-srv TFO 507, 560
MS-FRS1 LZ+TFO+DRE UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
netapp-snapmirror LZ+TFO+DRE 10565-10569
pcsync-http LZ+TFO+DRE 8444
pcsync-https TFO 8443
rrac TFO 5678
Rsync LZ+TFO+DRE 873
Thanks a Lot
My Best Regards,
Andre LomonacoAs you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method. -
I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?
Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.
-
I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?
I use
Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
and
Dropbox (https://www.dropbox.com/)
Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage. -
The last time my iTunes couldn't update. I used support from Itunes and downloaded it my desktop. My mistake. Because without thinking, I deleted it within the last six months from my desktop, without thinking I'd need it later. For the past month I've needed to update my Itunes and it can't find the msi. Now, my Ipad, my kids' ipod touches and my iphone can't update. Especially the ipod touches, iphone and work ipad have already updated to the OS6. And, now they won't work with this outdated iTunes. Help.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Error in generating SID for 0Requid (187.98)
Hi All, We have transported requests into the Quality and when iam trying to run the infopackage for master data through flat file, it pops up this erro msg which says "Error in generating SID for 0REQUID (187.98)". This is the case with all master d
-
Error in BW integration in Portal
Hi Portal Guru Here I am getting error in BW Integration for Bex Web Application Designer. Portal Communication error. pls tell me the solution for this. helpful answer rewarded with Max Points. Regards sumit
-
Setting session variable names based on variables in a loop
I am trying to set up a loop that sets up a list of variables based upon a list, by looping over the list and setting the session.NAME: <CFLOOP list="#fieldnames#" index="fieldname"> <cfset session.#fieldname# = "1"> </CFLOOP> It does not seem to lik
-
I installed Leopard earlier on today (Family license) on both my iMac and my MacBook. I thought both installations had gone perfectly smoothly, but it transpires that the new effects in Photo Booth haven't been installed on my iMac! =( They've been i
-
I have CS4 but am installing CS6 rather than upgrading. Do I need to uninstall CS4?
I am still using CS4 at prepsent but am installing the complete CS6 rather than upgrading. Do I need to uninstall CS4 or is that taken care of when installing CS6?