I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
Open an Mp4 movie
Choose filter, lens correction
Choose dii
choose Phantom FC200
click ok and the image improves.
I then save as a name.psd and close the file.
I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
What am I doing wrong? If you can help me I would be very grateful.
Marc

AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

Similar Messages

  • The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking.  How do I make her voice go away and my IPAD work like it should.

    The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking.  How do I make the voice stop and my IPAD work again. 

    If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
    Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • I have downloaded the Creative Cloud and when it finished, it opened up and was completely blank. Nowhere for me to sign in and no apps for me to click to download. I need this to be fixed ASAP. What is the problem here?

    I have downloaded the Creative Cloud and when it finished, it opened up and was completely blank. Nowhere for me to sign in and no apps for me to click to download. I need this to be fixed ASAP. What is the problem here?

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • I recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me! :)

    i recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me!

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • My ipod touch 5 is frozen on the lockscreen and i cant do anything except restart it and that doesnt hekp. will getting a new screen help? or is there another, less exspensive way? also, it is not connected to wifi.

    I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
    its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
    please help.
    will getting a new screen help? or is there an easier, less expensive way?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • TS1630 Does anyone else have a problem where you can't hear anything from your headphones when you plug them in and they play from the speakers? I checked the jack and there was nothing in it so I don't know what to do....

    I tried to listen to my music from my headphones and when I plugged the headphones into the jack, and pressed play, the music came out through the speakers. I don't know why that happened but I've never been able to get sound through my headphones.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • The menu bar goes transparent after 50-60 seconds and my mouse scroll wheel and keyboard wont work unless I click somewhere on the screen

    I hope someone can help. I'm using Firefox 31.0.1
    The menu bar at the top of the screen is a white transparent color and everything is working fine but after 50 or 60 seconds it changes to completely transparent, I can still read the words file, edit etc. This is where the scroll wheel on the mouse and anything I am typing stops working. Now all I have to do is click somewhere in the window and it works again but only for 50-60 seconds. I have had to click the screen twice since I started typing this because when I look at the screen, everything I have typed is not there because the menu bar went transparent again while I was typing. Its driving me nuts.
    I don't remember this being a problem before today, if it was I would surely have noticed. Have I pressed something or clicked on something by accident??
    I'm considering throwing the lot out the window, its really annoying, please help lads and ladies.

    Hello,
    According to your user agent, you are on Firefox 32. If you planned to use Firefox 31 ESR, you can grab a copy here:
    * https://www.mozilla.org/en-US/firefox/organizations/
    Out of curiosity, when it turns transparent, is there a "(Not Responding)" appended to the end of the window title? If you don't have the Window title being shown, it might show up if you have window titles shown on your taskbar, or in the task manager (right click on your taskbar and select "Start Task Manager"). If you do see a Not Responding, it could be a slow script on one of the pages you are viewing.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • When right clicking on a doc file and choosing create a pdf file....Word 2013 launches and creates problems. We are using Acrobat Pro. Is there a way to turn off this feature in Word 2013?

    Is there a way around Word 2013 hijacking Acrobat Pro "create a pdf" process? When right clicking on a doc file and choosing "create a pdf" .......the Acrobat process will beging but then Word 2013 jumps in and creates problems.

    That's exactly why it needs to support it... The support means the
    application was tested in the supported environment and is known to work
    well in it. In unsupported environments you can get all kind of strange
    conflicts like the one you're experiencing.
    On Tue, Apr 21, 2015 at 7:27 PM, timmm4731946 <[email protected]>

  • I upgraded to Firefox 4. Whenever I click on the firefox icon, msg appears - "ug-in object: TypeError: id] is undefined". Only when I click OK will Firefox open up and then work as per normal. How do I get rid of error msg.

    I use an iMac OS X 10.6.7. After I upgraded to Firefox 4, this problem occurs.
    Whenever I click on Firefox icon, message appears - "ug-in object: TypeError: id] is undefined". Only after I click "OK" in the error message, does Firefox open it and I can use it to browse as per normal.
    I notice it took a long time to open up some websites.

    That indicates that you are using an add-on that is not compatible with Firefox 4. For details of how to troubleshoot this to find out what one is causing the problem see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT4106 I got the USB camera adapter but when I connect it with my ipad mini and my Samsung camera pl120 it appears on my ipad that is too much power.....I don't know what to do????

    I got the USB camera adapter for the ipad mini but when I connect it with my Samsung camera pl120, it appears that's too much power on my ipad mini..,,,so I don't know what to do??????

    If you have the card reader part of the camera kit and your camera uses SD cards, try doing it that way. It is the least troublesome way.
    BUt if that doesn't work, then it may be a setting on your camera. Your camera may be trying to pull power from the iPad for you to download, and the iPad won't put out that much, triggering the error. If you have a power supply for your camera you can try using that. If not, maybe something in here can help you
    http://support.apple.com/kb/HT4101
    you might also check on Samsung's site. See if they have any advice specific to iPads that can help.

  • I've an iMac with OS X 10.4.11. Sudden email problem: every received email has, after the header, 1 - 2 pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, etc.) I don't know why this now happening, and I don't know how to get rid of it.

    I have an iMac using OS X 10.4.11. Beginning several days ago, all incoming emails have, after the usual email header and before the message appears, one to two pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, Content-Transfer-Encoding, etc.). This is similar and more complex that the info one receives when an undeliverable email bounces back. I don't know where this stuff comes from, or how it came, and I don't know how to get rid of it. Any ideas? I'm something of a newbie to computers (um, what's a Tag?).

    That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
    Check Mail -> Preferences -> Viewing -> Show header detail
    I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

  • I Am So Mad At Apple Because I Can't Purchase A Game And Have a Secruity Question And I Don't Know It Why?

    So I Need Help Cause I Don't Know My Secruity Question I Didn't Know But I Forgot Please Help Me And Sooner Or Later I'll Ge a Respond...

    https://discussions.apple.com/thread/4525958
    https://discussions.apple.com/thread/4525888
    https://discussions.apple.com/thread/4526518
    https://discussions.apple.com/thread/4530306
    https://discussions.apple.com/thread/4530660
    https://discussions.apple.com/thread/4530464
    https://discussions.apple.com/thread/4531094
    https://discussions.apple.com/thread/4536314
    https://discussions.apple.com/thread/4536338
    https://discussions.apple.com/thread/4536365
    https://discussions.apple.com/thread/4536329
    https://discussions.apple.com/message/19402953

  • HT1222 7.0.6 has started to download days ago and seems to have malfunctioned. Showing as still downloading and can not open sites through my emails eg Tesco email can not access by tapping screen etc. what can I do?

    Hi, I need advice - 7.0.6 security  update has been showing as downloading for days, obviously malfunctioned. Can not open email links etc and don't know how to cancel as not responding. What can I do?

    Hi Glennie,
    Please see: http://support.apple.com/kb/HT1808 which should be of assistance to you.
    Regards,
    Steve

  • My mac is telling me when I attempt to download an HD movie from iTunes that, "This cannot be purchased in HD on this computer." this does not makesense because I have the retina display Macbook pro 15"

    My mac is fully loaded, it is the brand new, a little over a year old Macbook pro. I cannot download this movie in HD because it says I cannot watch HD movies on my mac, I have done this countless times before and I don't know why i am just having this problem now. Is there a setting that I have wrong or is there a problem that needs to be corrected with my mac? I have all software and iOS up to date.

    Unfortunately, Canon's most current 1080p digital cameras are plagued by the same bug: they have 5.0 as their H.264 level. This is why you can't synchronize  them to the iPad version of Videos, because Apple (pretty much unnecessarily) limited the synchronizable H.264 level to 4.1.
    You can fix this in two ways:
    - use a third-party video player with hardware playback and iTunes File Sharing sychronization (meaning you can just drop the file in them in the App list); for example, GoodPlayer or It's Playing.
    - change the H.264 level. You can do this with both recompressing (in most cases, it's not recommended) with HandBrake or (this is what you should try first) just changing the given byte with a desktop tool. You want to read http://www.iphonelife.com/blog/87/making-stock-videos-application-play-every-mp4 -files-possible on the latter subject.
    There's a related thread at https://discussions.apple.com/message/18910324?ac_cid=sa123456#18910324 , where I've posted a lot on these subjects. You'll want to read my first two large posts there, not the last one. (The last one is strictly discussing Canon camcorders, not digicams.)

Maybe you are looking for

  • HOW to send a value to another jsp page

    HOW to send a value to another jsp page, like user name in one jsp page to another jsp page

  • Error -3212 when trying to open store

    Everytime I try to open the itunes store after updating to the new version I get the message "it=Tunes could not connect to the iTunes Store. An unknown error occurred (-3212). Make sure your network connection is active and try again." Could someone

  • Saving Issues after installing latest update

    Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). An

  • Planning run to consider Ware house stock before PREQ for Vendor

    Hi All, I need some help in setting up the system for below requirement : 1.When i am running my planning run at DC 1st I need to consider available stock at my Warehouse ( STO) and then create a PO for Vendor to fulfill any remaining demand . 2.Whil

  • One weblogic instance listening to multiple ports

    I'd like to run weblogic with its http subsysten listen to port 80. Any other service should listen to port 7001. Is it really impossible to let weblogic do this? Are there any plans to implement such a feature? Which alternatives do exist? TIA klaus