I am trying to change my mousepad battery. keyboard does not come back up

I am trying to change my mouse pad battery. have replaced battery. keyboard does not come back on.

If you continue and you lose everything, you will be able to download most of the content again for free as long as you use the same Apple ID. You can read this about downloading past purchases.
http://support.apple.com/kb/HT2519
But before you continue and lose everything, try this.
Eject your iPad, quit iTunes and restart your computer. Then launch iTunes and go to Edit>Preferences>Devices. See if you have mutliple iPad backups showing in there. If you have multiple backups, delete all but one of them. Also check the box at the bottom that turns off auto sync .... Prevent iPods ......Click OK and Then quit iTunes.
Connect the iPad again and launch iTunes. Right click on your iPad name on the left side of iTunes and select backup. See if the iTunes will create a backup. If it does, after it finishes, click on the Summary Pane on the right and click on check for update. Try to update again.
If it all goes OK, after you update the iOS you can back to Edit>Preferences>Devices and turn on atuo sync again - assuming that is how you want to sync.

Similar Messages

Ideapad K1 shuts off and does not come back on unless hard reset by battery disconnect

For some reason, once in a while, my Ideapad K1 will shut off and will require the battery be manually disconnected and reconnected to come back on again. The light will not show charging when plugged in as well when it shuts off.
I am on the lenovo latest factory update.
This is quite annoying as it is difficult to remove the rear panel and put it back on to disconnect the battery.
Is there any kind of fix/patch/update that resovles this issue?
Are there any work arounds that are less of a hassle?

Try to set it up as new device, this time without using the latest backup. If this does not work, contact Apple to get it checked.
Apple - Support - Service Answer Center

HT4061 My iPad 2 crashed when I was upgrading from 7.02 to 7.04. I have tried to reset the iPad several times, but it does not come back. It gets stuck with a screen that shows iTunes in the middle with a graphic showing the adapter cord with an arrow

What do I do now to restore without looking all my data, photos and settings?

Did you do a backup before you did the iOS update. You should always do this in case of problems. Otherwise your data/files my be lost.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

When trying to log into App Store my keyboard does not come up and it asks me to paste password!

It won't let me log in...because it ask me to paste my password...I have no idea why it just started doing this!

Quit the App Store app and reset the iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Lost all songs, trying to reset or restore, source button does not come up

Windows XP
Windows XP

AdBlock Plus does not block frames, it block most ads on web pages.
AdBlock Plus is an Extension, not a Plugin
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

Hello, do you have another admin account to log into for a test?

Changes made in Design view does not update on Run

Hello,
I add a button, or move some components around has no effect when I run the application. I am using Flash Builder for PHP 4.5 and there is no way to tell FB to compile the mxml file. In other Eclipse distribution, you have Compile and Run. I only have Run.
Previously, clicking Run would make the changes visible. Now, that does not work. I always see the old view. I have tried doing a Clean, but without success.
I would appreciate any input on this matter.
Thank you.

So again: What did not work:
1) Clean build
2) deleting relevant swf files
Point 2 hinted me what to do. If the file is inexistant and Google Chrome still opened it, then the most probable reason was the cache. After clearing the Chrome cache, my swf files were loaded with the changes I made.
I have stopped using Chrome now, and back to old Firefox. Firefox is a memory hog, but it just works.
Hope the above provides help to anybody having the same problem.

Note 123383 You are changing a function group which does not belong to you

Applying note 123383. Got SSCR keys from SAP to modify the identified tables.
When trying to save changes, get error message "You are changing a function group which does not belong to you".
I changed Function Group ownership to myself, but still get error message.
Anyone have an idea how to resolve?

Just in case... did you do the following?
"If, when you are maintaining certain views, the error message DS138 'Changes prohibited by user ... ' or error message EU522 'Changes to ... are prohibited by ... ' is generated, remove the <b>editor lock</b> from programs L0GFNTOP and L0GFPTOP as described in Note 37900."
~Suresh

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance

I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance '. I changed my apple ID passwords, still same. help me please

Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

Without knowing what you did and exactly what happened (error messages) all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi

I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?

Hi,
If you are trying to utilize AirPrint you need an HP compatible printer listed here.
http://www.apple.com/ipad/features/airprint.html
Scroll down.
Carolyn

My phone 5s did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.

My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone. This phone is not even 6 months old been in case no scratches. This is driving me crazy.

Connect your phone to a computer and restore your software using iTunes.

When trying to creat a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem...

Question
When trying to create a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem?I do not have any installed plugins....at least none that I know of.....remember I am a new user......Basically, the desktop icon is not going directly to the Mozilla FF to get me to the web site I need to go to.....FF works when I use the Mozilla FF icon.....just not the icons I create.....THANKS!!! I have also tried reinstalling FF and get the same results.....HELP!!!

The address beginning with file:/// denotes a saved file (local file). The file may not be present. You can try dragging the site icon of this page on the left edge of the location (Address) bar and release it on the desktop. Please try opening it. If it still shows an error it could be a problem with the system's zone permissions. You can try setting each zone in the Windows Control Panel or IE > '''Internet Options''' > '''Security''' tab to '''Default Level'''.

I am trying to change my mousepad battery. keyboard does not come back up

Similar Messages

Maybe you are looking for