I am trying to change my security questions I forgot answers but there is no option to do this when I go into the Manage my Apple ID. Why can I not see this option to change my questions.

I am trying to change my security questions I forgot answers but there is no option to this when I go into the manage my apple ID. I see the questions, but can't change them. Help?

Here is a link that should meet your needs.
Rescue email address and how to reset Apple ID security questions
Let us know how you got on.

Similar Messages

Why can I not see any of my music purchases, I have not changed my ID or account details

Why can I not see any of my music purchases, I have not changed my ID or account details?

Hi,
Please enable Speakers in Playback devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Why can outlook not see my calendar

why can outlook not see my calendar?
When I click on icloud in my outlook calendar, I get this error:
The set of folders cannot be opened. The information store could not be opened.
it all used to work perfectly!

You need to republish your website...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... to a new host...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you don't have a domain name, your host should supply one for free. If you do have one, you need to contact yout domain registrar to forward it to the new location of your website files.

Why can I not see the SSID on my Mac but on my iPhone and iPad?

Why can I not see the SSID on my MacBook Pro but I can see any easily connect on my iPhone and iPad?
I can see all other networks close by though!
Please help

OS X Mail: Troubleshooting sending and receiving email messages

My computers are authorized and home sharing is turned on. Why can I not see the home sharing icon?

my computers are authorized and home sharing is turned on...why can I not see the home sharing icon to troubleshoot and import libraries?

Hello jfromlea,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your Home Sharing issues:
Troubleshooting Home Sharing
Regards,
Jeff D.

Why can I not see the date messages are sent anymore

Why can I not see the date messages have been sent anymore

Drag your finger from right to left to reveal the time

Why can I not see an audio book purchased from another computer on my cloud

why can I not see an audio book purchased from another computer on my cloud

Where did you download it from? What format is it in?

HT4623 Why can I not see the new 7.1 features on my iPhone 4s

Why can't I see the new 7.1 features installed on my iPhone 4s

Hello Dfviens,
iOS 7.1 has had some bug fixes and minor UI changes. IE: Caller UI, Power off UI.
^Connor

Why can I not see a table I own inside a procedure

I have a procedure owned by user X as follows:
create or replace procedure ztm_get_debug_level is
vc_pkg_name system_parameter.name%TYPE := 'DEBUG_LEVEL_PKG_BASE_KEYS';
vn_error     services.debug_log_level.debug_level_id%TYPE := 30;
v_debugLevel   system_parameter.number_value%TYPE;
function get_owner return varchar2 is
    cursor c1 is
    select owner from all_tables where table_name = 'SYSTEM_PARAMETER';
    v_Ret_Val VARCHAR2(30);
BEGIN
    OPEN C1;
    FETCH C1 INTO v_Ret_Val;
    CLOSE C1;
    RETURN v_Ret_Val;
END;
begin
DBMS_OUTPUT.PUT_LINE('AAAA - ' || get_owner);
select s.number_value
into   v_debugLevel
from   system_parameter s
where s.name = vc_pkg_name;
DBMS_OUTPUT.PUT_LINE('BBBB');
exception
when no_data_found then
    NULL;
when others then
   DBMS_OUTPUT.PUT_LINE('p_get_debug_level.WHEN OTHERS');
   raise;
end;
Table system_parameter is owned by user X.
When I execute I get:
TESTSSG.SUBSCRIPTION.87> exec ztm_get_debug_level
AAAA - X
p_get_debug_level.WHEN OTHERS
BEGIN ztm_get_debug_level; END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SUBSCRIPTION.ZTM_GET_DEBUG_LEVEL", line 32
ORA-06512: at line 1
When I run the query outside the procedure as user X I get a row.
Any ideas?
FYI, there are no public sysnonyms.
DB version: 11.2.0.3.0
Thanks,
Thomas

Thanks Frank,
SYSTEM_PARAMETER is a table owned by X. If I qualify the select statement by adding the owner it works, but of course I do not want to do that. Here is the DDL for creating SYSTEM_PARAMETER:
create table SYSTEM_PARAMETER
name         VARCHAR2(256) not null,
date_value   DATE,
number_value NUMBER,
string_value VARCHAR2(512),
comments     VARCHAR2(512)
alter table SYSTEM_PARAMETER add constraint PK_SYSTEM_PARAMETER primary key (NAME);
Again, if I rewrite the procedure to the following (only difference is the red X.), it works:
create or replace procedure ztm_get_debug_level is
vc_pkg_name system_parameter.name%TYPE := 'DEBUG_LEVEL_PKG_BASE_KEYS';
vn_error     services.debug_log_level.debug_level_id%TYPE := 30;
v_debugLevel   system_parameter.number_value%TYPE;
function get_owner return varchar2 is
    cursor c1 is
    select owner from all_tables where table_name = 'SYSTEM_PARAMETER';
    v_Ret_Val VARCHAR2(30);
BEGIN
    OPEN C1;
    FETCH C1 INTO v_Ret_Val;
    CLOSE C1;
    RETURN v_Ret_Val;
END;
begin
DBMS_OUTPUT.PUT_LINE('AAAA - ' || get_owner);
select s.number_value
into   v_debugLevel
from   X.system_parameter s
where s.name = vc_pkg_name;
DBMS_OUTPUT.PUT_LINE('BBBB');
exception
when no_data_found then
    NULL;
when others then
   DBMS_OUTPUT.PUT_LINE('p_get_debug_level.WHEN OTHERS');
   raise;
end;
This procedure exists in 4 other environments where there are no issues. It can't be a privileges issue as the table is owned by user X and as you can see by the lookup (which was added for debug) against ALL_TABLES the owner is clearly X. So, why can X not select from it's own table unless we include the owner?
Thanks,
Thomas

Why can I not see

Recording audio in Logic Pro: Why do I not see the audio waves when recording normally? Only with punch-in recording I can see them..

Recording audio in Logic Pro: Why do I not see the audio waves when recording normally? Only with punch-in recording I can see them..

HT5312 I forgot my security question answers but there is no option to email rescue address when I am managing my Apple ID..

It says in the article for rescue email and security q's in the picture in step 5 that you can email your rescue address if you forgot your security question answers. However, when I am managing my Apple ID there is no option like that..Please help!

You should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your account/security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Why can I not see other libraries in Home Sharing?

I have tried EVERYTHING! I cannot figure out why my mac and PC will not communicate. I have authorized both computers with the same Apple ID and Home Sharing log in is all the same for both computers. I have turned off firewalls on both computers. They are signed into the same network. BUT there is still nothing under the Home Sharing tab of the menu bar. Can anyone please help! Thanks

check out these links:
Troubleshooting security software issues
Troubleshooting Home Sharing
and, last but not least, see this discussion concerning bonjour being the culprit.

Why Can I Not See Clone and Retouch Effects?

Hello out there!
I have newly installed Aperture 3.3.1 on my Macbook Pro OSX 10.7.4 running Lion, also newly installed.
My previous version of Aperture 2.? clone and retouch buttons suddenly stopped working months ago and never did start again - I have trashed Aperture 2.
Aperture 3 clone and retouch tools also don't work. When I try to use either tool, they appear to work, but no change is visible. Each try adds a stroke in the adjustment pane, but I can't see the changes.
I may have read somewhere in these discussions, but I can't find it again now, someone's tip to rebuild the library?
Anyone have any thoughts? Greatly appreciated.

Kirby's advice should work, if you open the correct library: You are looking at the system library /Library/Preferences, not at your user library.
In Mac OS X Lion your User Library is hidden by default.
You can access it by using the Finder's "Go" menu from the Finder's main menu bar.
Select the "Go" menu entry and hold down the "alt/option" key ⌥, until the library appears in the drop down menu.
Select and click "Library".
In the window that opens select the "Preferences" folder, and then move the file "com.apple.Aperture.plist" to the Desktop, like Kirby suggested.
Make sure, you quit Aperture properly, before you move the preference file. Im Mac OS X Lion new process system (automatic termination) the only safe way to ensure that an application really quits is to log off and on again.
Then it should work, like Kirby Krieger suggested. And please let us know, if this brought back your clone brushes.
Regards
Léonie
P.S. If you want to make your user library permanently accessible again, drag the folder to the Finder's sidebar or change the hidden flag to "nohidden" using the Terminal:
Open a terminal window and enter:
chflags nohidden ~/Library
Then hit return.

Why can I not see any newly created 'Groups' in 'Work Group Manager' on the client Mac at login?

Hi. Now, this issue has not been resolved since 10.6 Server. I have now upgraded to Mountain Lion and the issue still persists. I used to easily create Workgroups/Groups in 'WGM' and they would appear at login for those users who were part of that group. As it stands the old created groups appear ok and can be accessed selected at the point of logging in. The newly created groups don't show up at all. They all look good to go when looking at WGM. I have tried removing the Users from the groups and adding them again but there is no change. It is getting me so frustrated!
Why is this happening? Is there a quick fix for this?
Any help will be gratefully appreciated.

Hi. Now thats a hard one to pin point exactly. I guess you mean Archiving the OD and exporting users and groups etc Yes this happened when we upgraded from 10.5.8 Server to 10.6 Server.
How do I go about fixing this in Mac OS X Server 10.8.4? Do I have to go through all that again? Will I lose any settings in doing so?
Thanks in advance.

I am trying to change my security questions I forgot answers but there is no option to do this when I go into the Manage my Apple ID. Why can I not see this option to change my questions.

Similar Messages

Maybe you are looking for