I am trying to change the display time in Captivate 5...

When I try to shorten the length of a slide either in properties or by clicking the end and dragging it, like in Captivate 4, it keeps going back to the original time. Normally I record a demonstration and when I am done adding the effects and the voice I have to shorten or lengthen a slide, but I am unable to do this in CP5. Please help.

Hello,
If the slide is longer than 3 sec you can change the 'Display time' in the Properties panel, General section too. But here you cannot get below 3 sec. Dragging in the timeline allows me to go below 3 sec, but you have first to shorten the timeline of the objects before you can change the duration of the slide. To be sure I just tried again and was able to get to a minimum time of 0.1 sec with that workflow. In the screenshot it is 0.3 sec. If you have FMR, video or audio however the duration of that object will be responsable for the duration of the slide.
Hope it works for you too, cannot explain why it is not possible with the Properties panel, which will show correctly the duration after you changed it with the Timeline.
Lilybiri

Similar Messages

IPad 3: How can I change the display time in a slideshow?

iPhoto for iPad is a nice App, but I did not find a possibility to change the time a photo is displayed in a slideshow. It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.

It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.
Not with the iPhoto.app slideshows. You could however use the Photos.app to present your iPhoto albums as a slideshow. For the Photos.app you can change the duration for the presentation of slides in the Settings.app.
Settings >Photo & Camera(s) > Slideshow > Play each slide for ....
Regards
Léonie

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it. Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read... I sent on the PC setting to try to change the display resolution.

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
I went into the PC settings and tried to change the display resolution. This changes the size of all the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!

Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
Mylenium

Changing the System time in the JVM where Weblogic runs

Hi,
I am trying to change the System time where the Web-logic server (11g) runs using Mocking. I use "jmockit.jar" to mock the System.class. A Spring bean is created and through that I try to change the System time. I need to change the time for testing scenarios. For example, I need to backdate and do the testing for some scenarios. For the moment I do this manually and I want to automate this by changing only the time in the JVM where the application server runs. When I try to automate this using the Spring bean, I get an error as follows. Do anyone have any idea about this.
[WLServer adminserver] Exception in thread "Timer-5" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "DynamicListenThread[Default]" java.lang.IllegalArgumentException: No class with name "com.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.logging.LogRecord.<init>(LogRecord.java:139)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:33)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:48)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:70)
[WLServer adminserver] at weblogic.logging.WLLogRecord.<init>(WLLogRecord.java:63)
[WLServer adminserver] at weblogic.logging.JDKLoggerFactory.createBaseLogRecord(JDKLoggerFactory.java:74)
[WLServer adminserver] at com.bea.logging.LoggingService.log(LoggingService.java:216)
[WLServer adminserver] at weblogic.server.ServerLogger.logListenThreadFailure(ServerLogger.java:205)
[WLServer adminserver] at weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:197)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "weblogic.timers.TimerThread" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:256)
[WLServer adminserver] Exception in thread "Timer-4" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-1" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-2" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "weblogic.time.TimeEventGenerator" java.util.MissingResourceException: Can't locate bundle for class 'weblogic.common.T3MiscLogLocalizer'
[WLServer adminserver] at weblogic.i18ntools.L10nLookup.getLocalizer(L10nLookup.java:427)
[WLServer adminserver] at weblogic.i18n.logging.CatalogMessage.<init>(CatalogMessage.java:47)
[WLServer adminserver] at weblogic.common.T3MiscLogger.logThrowable(T3MiscLogger.java:325)
[WLServer adminserver] at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:126)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
OR
Do anyone know any other way to overcome this issue using some other mocking jar.
Thanks
Edited by: 913136 on Feb 8, 2012 2:32 AM

Hi,
I could manage to change the time in JVM where the Weblogic server runs. I loaded an Spring bean from my Test class and from that bean I set an offset (to shift the time) in the Mock class (say, MockSystem class). In this case I used the jmockit implementation for instrumentation purposes. The MockSystem class should not be instantiated by us and jmockit takes care of that part. What I had to do was defining the javaagent and another parameter ("-Djmockit-mocks=com.abc.common.service.impl.MockSystem") in the Weblogic server build XML (mentioned in the following URL[1]). But to work this the MockSystem.class file should be wrapped in a JAR file and included in Weblogic server/lib directory and define it in the Weblogic build XML file as a classpath. For more explanations visit this URL [2].
[1]. http://jmockit.googlecode.com/svn/trunk/www/javadoc/mockit/Mockit.html#setUpStartupMocks%28java.lang.Object...%29
[2]. http://code.google.com/p/jmockit/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Tool%20Type%20Status%20Priority%20Summary&groupby=&sort=&id=207
Thanks
-thiwanka-

Change the start time of track 1

Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art?

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.

Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
Just a suggestion..

I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
Can anyone help me resolve this problem?

Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

Hi Canberabomber,
If you are having issues setting or changing the APN on your iPad, you may find the following article helpful (apologies if you have already seen it):
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/ht2283
Regards,
- Brenden

On Calendar, I have tried to change the "Day starts at" and "Day ends at" many times however, it just does not seem to change. Please help.

On Calendar, I have tried to change the "Day starts at" and "Day ends at" many times however, it just does not seem to change. Please help.
This for Calendar on my Mac which of course effects my iPhone and iPad.
I don't need to see the hours from 1 am to 6 am
Please help!

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

Trying to change the Tab size of SQL Server 2008 R2 ?

Been trying to change the size of the tab but it just doesnt change!
Went to Tools-Options-Text Editor-Transact-SQL
From 2 to 1.
Any ideas?

Hi Shavendra,
The Options dialog box lets you change the default behavior of the Database Engine Query Editor while you are programming Transact-SQL scripts. To display these settings, click Options on the Tools menu, expand the Text Editor folder, expand the Transact-SQL
subfolder and then click Tabs.
Tab size: Sets the distance in spaces between tab stops. The default is four spaces.
Reference: http://msdn.microsoft.com/en-us/library/bb895215.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

Thank you very much! This is exactly what I was looking for.
I appreciate your time and effort in solving my question : )

Change the display of the multiple Table items using a single Drop-down

I have created a Web Template in BEx WAD (BW 3.5) with 4 Tables assigned to 4 dfferent Queries. Now I want to change the display of the all the Four Tables based on the selection of display properties chosen in a single Dropdown item. The properties to be selected in the dropdown are like changing the Alternate style display of Rows, Suppress Alternate Style, Display only 30 Rows or 60 Rows.
Please help me in writing the script necessary to pass the command from the dropdown to all the Tables to get the desired output.
Thanks,
Krishna
Edited by: Hari Krishna Velampalli on Oct 26, 2008 12:00 AM

Dipika, Thanks for the response.
I tried using that option but again since we cannot give custom options in a drop-down,
I created a Form with a drop-down list of options like Suppress Result Rows, Suppress alternate style of rows, Display only 30 Rows, Display only 100 rows .. and so on.
Now I am able to change the display of my first table by selecting the options in the drop-down list. But my intention is to apply that selection to Multiple Tables.
How can I achieve that?
HK

I am trying to change the display time in Captivate 5...

Similar Messages

Maybe you are looking for