I am trying to configure an iPad to print via Airprint to a HP Laserjet Pro CP1225mw printer and are having problems
Currently I am able to print to the printer via Airprint but because the iPad has a priority of Wi-Fi over 3G, when I want to browse the Internet at the same time via the iPad's 3G connection it will not which makes it hard to print pages from websites. I have the option of adding the printer to the internal wireless network for the organization but I am trying to avoid it as iOS-based devices get constantly prompted for username and password when trying to authenticate HTTPS connections and this may prove an irritation for the user that is going to get this printer. Also I want to restrict who can access this printer as it is mean for use for one specific person in the organization.
Some printers support adhoc networks. This would keep it off your corporate net. Of course, I haven't tried this.
For example HP D110.
HP D110 Info Page
Buy another box
I don't know if this will help you or not but could be worth looking into.
"The xPrintServer-Network Edition is a 'plug-and-print' hardware print server for printing from Apple iOS devices running iOS version 4.2 or higher. The device is roughly the size of an iPhone and uses the iOS native print menu. It requires no additional applications, software downloads, or printer driver installations and automatically discovers available networked printers supporting JetDirect / AppSocket, LPD and IPP protocols."
http://www.smallnetbuilder.com/cloud/cloud-devices/497-lantronix-shipping-airpri nt-server
Similar Messages
-
I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please
Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host> -
I have a mac os x 10.7.3 and am trying to install a dell v515w printer. Have tried numerous times to find driver, but mac says not compatible. I read something about using a Lexmark driver. Any suggestions???
Thanks so much,If there is no driver compatible with OX X 10.7 you might want to consider getting a different printer. It may save hair pulling and aggravation.
-
I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck. Is anyone else having this problem please?
I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes. Now it's dad and husband, every time! Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails.
And the other annoying thing- the blue bar will run all the way, and it will say "delivered". So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point. I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions. (I have rebooted phone, reset network settings, with no luck. I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me) -
I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
How do you configure the ipad to print air print but of A4 size please ??????
how do you configure the ipad to print air print but of A4 size please ??????
Frankie,
The usual setting is in Printing Preferences.
In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
I can provide details and "how-to" if you need more help.
Printer model info would be helpful, and do you have your printer software loaded yet?
I hope this helps!
We work hard to help!
When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips!
Install your Printer Software!
Look for your Printer’s Software at your printer’s own website!
Software, manuals, alerts, “how-to” information, and much more!
To see if there is software for your printer, Start at: Support and Drivers
Kind Regards,
Dragon-Fur -
I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.
Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!!
-
How to connect my iPad, Brother printer, and AirPort Extreme?
How to connect my iPad, Brother printer, and AirPort Extreme?
I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?
-
I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks
You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
Cheers, Tom -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference
Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html -
I am trying to reset my ipod and am having problems. can you please help?
I am trying to reset my ipod and am having problems. i forgot my passworde and now it is locked. can you please help?
iOS: Forgot passcode or device disabled - Apple Support
-
is the app store and itunes having problems? I cant open them in my ipad and I cant buy anything on my iphone
Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa -
I am trying to connect my ipad to my mac book pro. I want to use the ipad as a software instrument (playing from garage band) and to record in garage band on the mac book. I have plugged the ipad in, turned on the ipad and opened up garage band but the mac book pro has not picked it up. Why? Any suggestions.
Maybe it should, I'm all PC here so I can't actually test it myself. As far as I can recall all the stuff I've read has GarageBand for iOS acting as the recording instrument in the MIDI relationship rather than an input device for something else.
Could be worth posting to GarageBand for iOS Feedback and suggesting it as a feature.
tt2
Maybe you are looking for
-
R/3 has problem with LineNum=0
Hi all! When sending an ORDERS05 to R/3 in the Intercompany Purchase scenario, the PO line number is set in the POSEX field. Now R/3 treats the 0 value as NULL! Is there any setting in R/3 that prevents this? The R/3 version is 5.0. Regards Lars Jöns
-
Text in PDFs sometimes looks/prints wrong on OS X but is OK in Windows
For a couple years now I've been hit with a problem with PDFs (in both OS X Tiger and Leopard, on PPC Macs and Intel Macs). Simply put, some PDFs simply look and print better on Windows. I hate that because I want to print them on my Mac and have the
-
Hi friends, I want to print few details of material master in tabular format in sapscript. Say I want to print matnr maktx and mtart. But the problem is how to draw a table having 3 columns as its structure
-
Where to set parameter EO_INBOUND_TO_OUTBOUND in PI?
I cannot find EO_INBOUND_TO_OUTBOUND in the instance profile or exchange profile. Could you tell me where to display/change this paramter? Thanks a lot!
-
Help migrating with Time Machine
Hi there! I have a couple of questions regarding Time Machine,thanks in advance to anyone can help. I have to sell my Imac and i have to wait for a couple of weeks until i get a new one. What i need to know is if it is possible mirror my Imac,System,