I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray.

Similar Messages

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

How can I use an external hard drive that says it's for pc?

HI,
I just ordered an external hard drive that said it would work with Macs. ON the box, it says for Pc's only. Is there a way to have it work with macbookpro?
Thanks

Does the macbook detect the HD in finder? If it does then you can go to DISK UTILITY and select it on the left panel side of DISK utility and go to ERASE. Select Exfat or Fat 32 format if you need to go in between MAC OSX and Windows 7. (Exfat is not supported on all machines running XP) Click the erase when you have the correct format and it should work.
If you can't detect the HD on your mac then you need to format it on a Windows machine to FAT 32 then you should be able to read it.
Your still using leopard? do you happen to have a PPC?

Can I and if so, how do I move the whole of iTunes from my computer to my external hard drive? I have absolutely no space left on my computer and desperately need to free up space! Many thanks for help:)

How do I move iTunes completely off my computer and onto my external hard drive? I have no more space on my computer and need to free up space quickly! will iTunes work from external hard drive only? many thanks :)

With iTunes closed, copy (safer if you don't yet have a backup) or move the entire iTunes folder from <User's Music> to X:\ as X:\iTunes (where X is the drive letter of the external). Press and hold down shift as you click the icon to start iTunes, keep holding shift until asked to choose or create a library, click choose, then browse to and open X:\iTunes\iTunes Library.itl.
Note that changing the advanced preference for the media folder location doesn't change where iTunes expects to find existing content. Moving the library in the way outlined above however will work.
You should think about backing up your library to another external drive or network share.
tt2

How do I back up my entire iphoto library to an external hard drive that I have dedicated for photos only? Can I simply drag the iphoto library onto my seagate (hard drive) icon?

How do I back up my entire iphoto library on to an external hard drive that will be my second back up plan. I already have one back up that is also synched with time machine. But now I want to back up my iphoto library to a new hard drive to have a second copy. Can I simply drag the whole library onto the icon on my desk top? THX

WHile you can do it that way, the next time you back up you'll end up copying the entire library again, and,as you'l see, once a library gets bigger that can take a considerable amount of time.
Try using an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Is it wise/ok to use and external hard drive that requires Tuxera NTFS for Mac.dmg to be installed?

I had a white screen issue twice recently and freaked out. I got everything back but worried now that my imac will crash and I will lose
all my files/pictures. I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac. Is this a good way to back of files on a Mac? If not what is better? Is there an Apple product for back up?
Please help I am clueless and worried about the dreaded white screen!

sketchgirl wrote:
I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac.
Depending on whether you need to use this as a boot drive and what model iMac you have (PPC or Intel) you will need to reformat the drive as a GUID or APS drive with Disk Utility. OSX Tips: Using Disk Utility: Format, Erase, or Reformat a Drive

When I installed iTunes 11 on a windows 8 system I get the music, but the screen dosn't have te library on the left. The left side of iTunes is the name. I got the songs by using a external hard drive. What have I done wrong?

When I installed iTunes 11 on a Windows 8 system the installation did not seem to work correctly. There is no sidebar and no ribbon w/ File, Edit, etc. I tried to use an external hard drive to move from an older computer using XP to the new one w/ Wdw 8. I thought if I deleted iTunes from the Wdw 8, I could reload it. Apparently I did not delete the music files because they appeared in the format I complained about, no side bar or ribbon. Can anyone walk me through the process of deleting everything and reinstalling? I am not very computer savy so a step by step would really be appreciated.
Thank you,

ctrl B - Show menus
ctrl S - Show sidebar

HT1751 I have followed the steps to back up my itunes library to an external hard drive but when I try to drag my library to the hard drive it does not work. Any suggestions?

I have followed th steps to back up my itunes library to an external hard drive but when I try to drag the itunes folder to the hard drive it does not let me. Any suggestions?

Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820

I am trying to make a DVD of some of my photos in iPhoto 11. The photos are in iPhoto, but in one of my external hard drives. I have been able to make DVD's just recently, but not now. What can I do? At the end I get a notice of "failure

HELP, HELP, I am having difficulty making a DVD-R of some photos I have in one of my folders in iPhoto 11. I use iPhoto on my external HD. I have never had problems before today making copies of my photos using DVD-R disk. I am doing the same thing that worked before. Some of my photos are going to be put in a gallery for showing and I need to make a DVD so they can choose which ones to display and enlarge the photos. It was due TODAY! Yikes! At the end of each try I get a window saying "BURN FAILED - The burn to the OPTIARC DVD RW AD-5670S drive failed. The disk drive didn't respond properly and can't recover or retry." help...........

How are you getting the photo onto the disk to burn? Have you tried exporting then to a folder on the Desktop and then burning that folder to disk using the Finder. That will give you a data disk with just the jpeg image files in the folder.
If that's what you're doing and getting the burn failed then it's a system or optical drive issue.
If you're using the Share ➙ Burn menu in iPhoto that will create a disk with a mini iPhoto library on it that can only be used by another Mac running iPhoto.
Can you elaborate on your workflow.
OT

HT4718 I have an external hard drive that I used as Time Machine Backup. I have not used it for a while and now, when I plug it in computer says: This disc is not readable. I want to recover the backups and not erase and reformat the disc. Thank you in

I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
I want to keep the backups on it and not erase and start over.
Thank you in advance.
Gregor

It sounds like something went wrong with the drive. Did you drop it? How long has it been sitting around unused?

How do I capture tape-based media to my external hard drive? There is only one firewire 800 port on the back of my I mac. The manual says to import tape footage directly into fcpx, but then I lose my external hard drive. thanks for your help.

In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.

Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ????

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

Similar Messages

Maybe you are looking for