I am trying to connect an airport extreme to extend my wifi coverage and it doesn't work

I hope someone can help me.
I have an Apple Airport extreme gen 5. I have a BT router/modem that I connect to my broadband and its signal is OK but not great. I have multiple apple devices, a windows PC, and a Panasonic smart TV.
I also use Belkin poweline adaptors to attach the TV and apple TV to my network - its flaky.
I was trying to attach the airport extreme to a powline adaptor in the lounge to extend my wireless network - it was green for a while but then flashed orange and stopped working.
I have now reattached it directly to my router in the same room with an Ethernet cable and still get the orange light and the airport utility keeps asking to attach to the WAN port but then nothing works - I can still acccess the internet through my existing bt modem/router.
Any ideas please?

Click the Wireless tab just below the row of icons
Make sure that the setting for Wireless Mode is set to Create a wireless network
The Wireless Network name would be the same name as the BT network
The Wireless Security would be the same setting that the BT router is using....should be WPA2 Personal or WPA/WPA Personal
The Wireless Password would be the same password as the BT network
Verify Password
Click the Internet icon
Click the Internet Connection tab just below the icon
The setting for Connect Using should be Ethernet
The setting for Connection Sharing should be Off (Bridge Mode)
Click the Update button at lower right of the window and allow a full minute for the AirPort to restart
Power off both the BT modem/router and the AirPort
Wait a minute
Power up the BT device first for a few minutes
Then, power up the AirPort
Everything above is a "quick fix". If that does not work, we will have to start all over again from scratch.

Similar Messages

HT4259 i connected two airport extremes by extending a wifi network. wifi seems weak...help

i connected two airport extremes by extending a wifi network. all my lights are green, and airport utility confirms connections are excellent. but the extended base station hasn't improved my wifi range in the area i set it up in.

If you have a Mac laptop handy, run the test that I have outlined below to find out if the remote AirPort Extreme is really extending the signal at all.
Here, I assume that both of your AirPort Extremes are the newer "square" versions....not the older "round" version.
Locate your Mac laptop close to the "main" AirPort Extreme
Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen
Look for the BSSID and jot down the last few characters
The BSSID is the AirPort ID of the AirPort Extreme
Now, move the laptop close the "remote" AirPort Extreme and perform the same test
If you see the same BSSID as the "main" AirPort Extreme, your Mac is picking up from the main AirPort...and the remote AirPort is not configured correctly to extend.
If you see a different BSSID near the remote AirPort, that indicates that the Mac is picking up a signal from the remote AirPort....which is exending the signal correctly.

Trying to connect my airport express to my home WIFI

Hi,
I have been trying to connect a airport express to my home WIFI connection for the purpose of wirelessly transmitting itunes to my Alfresco area using my iphone as a remote.
The problem i currently have is that the airport does not seem to pick up my wireless broadband.
My router is a Netgear dgnd3700.
The procedure i followed so far is : 1. Reset the airport back to factory settings.
2. Plug the ethernet cable in and open airport utility.
3. Tick the circle saying " join existing network ". Here's the problem, my wireless network does not show up.
I can type in the name of my network and also the password but the airport is not picking up the signal .... i cant choose a network.
I can create a new network no worries and connect devices to it but that's not what i'm after. I'd like to join my existing network so i can transmit itunes to my amp.
I've gone through the discussion forum but can't find an answer. I have also tried to manually set up the connection .. same result.
Any help would be great ... i'm about to give up and think it was abad idea ....

If it is the old G version Express you cannot use 6.3 utility.
You must use the 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

When using an airport extreme to extend a wireless modern, will the lan ports work?

When using an airport extreme to extend a wireless modern, will the lAN ports work?

The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

Trying to connect to Airport Extreme with Dell Wireless 1370 and Windows XP

Home network using Airport Extreme Base Station with WPA-PSK (TKIP) Security. All works well with MACs in the house (G5, iMac, and Powerbook). Trying to connect a Dell Latitude D610 with built-in Dell Wireless 1370 WLAN mini-PCI Card to the home network.
Initially home network is not seen on Dell Laptop in available networks (as expected as it has not been added to list of available networks and is a "closed" network)although I do see the neighbors network so card is working and sees "open" networks.
Set-up options for the Dell 1370 card include:
Network Name (SSID)
Network Authentication (Includes "open", "shared", "802.1X", "WPA", "WPA-PSK", and "CCKM")
Data Encryption (When WPA-PSK is selected it defaults to Auto)
Network Key
Confirm Key
All other configuration items are greyed out.
I enter my SSID, select WPA-PSK, Data Encryption defaults to auto, tried entering passwrod in Network Key and Confirm Key which does not seem to work. Adds to list of preferred networks but does not indicate availability.
Question is I have a password that I use on MACs for access to WPA-PSK network. On the Dell there is no spot for a password and it does not seem to work in the Network Key or Confirm Key boxes.
Any assistance would be appreciated.
Thanks
mark
Airport Extreme Base Station Windows XP Dell Wireless 1370 WLAN Mini-PCI card

Initially home network is not seen on Dell Laptop in
available networks (as expected as it has not been
added to list of available networks and is a "closed"
network)
Open (broadcast your SSID) your network and see if that makes a difference.
Often (especially in crowded airwaves) a closed network can cause connection issues for some adapters.
iFelix

Macbook Pro trying to connect to Airport Extreme I no longer own

I used to own an Airport Extreme which I used to run backups on my Macbook Pro, but got rid of it over a year ago. Then a few days ago, after a software update, I've started getting the following error message when I wake my macbook up from sleep "there was a problem connecting to the server airport extreme". I've checked the Airport Utility and it doesn't think there is an Airport Extreme connected. I can't find anything running in the background either, but then I'm not super techie, so its quite possible I'm not looking for the right things in the right places. Its starting to drive me a bit potty as I can't find anything similar in a google search either, so I'd be grateful if someone could help me work out what to do about it (preferably by giving me simple step by step instructions!). Thanks

Clean install the OS..
Sorry but if you have deleted all the plist files it would be gone.. but upgrade installs of Yosemite are so buggy.. just start over..
Use the existing TM backup to restore your files.. of course take great care doing this and if you need to make a new clean backup to a usb drive plugged directly to the computer.. a disk image can also add to the security of your files.
This is OS problem .. not the TC which is no longer even there.

Using domestic power circuit airport extreme to extend a WiFi network

I use a Time Capsule as a WiFi device behind an ADSL router supporting MacBooks and iPhones 4 and 5. In parts of the house the devices struggle to find the WiFI so I want to extend the network into these dead spots. I have read that using WiFI to extend the network uses the 5GHz band and imagine that will have an effect on the overall performance as seen by the client devices.
Would there be any problems in using the power circuits with an airport extreme at a suitable location in the dead zone?
I don't think the problem I have is a configuration issue but is just the fact that there is a lot of potential interference in place e.g. satellite dish and antennae cables.

OK thanks. "Extending" a network using power line adapters obviates any question regarding interference affecting your wireless network, at least as connecting the Extreme to your Time Capsule is concerned.
Power line adapters use your house wiring as a substitute for the Ethernet cables that would normally connect network devices. Your AirPort Extreme and Time Capsule would be connected to one another through the adapters and your house wiring, instead of communicating with each other wirelessly. Both of them will still use their individual 2.4 and 5 GHz networks to communicate with your MacBooks and iPhones.
This is a potential solution for some people, but it involves the unknowns of premises wiring. Some devices work, some don't, and those that do might not work if they are relocated to different outlets even within the same home. Improper or substandard wiring is very common and almost certain to present a problem.
It's a compromise that may or may not work in your particular installation. All you can do is try it.

How do I use AirPort Extreme to extend my wifi network - have BT HomeHub 5

AirPort Extreme is plugged into my HomeHub 5 and I have set it up as extending a network using the Airport Utility, but it isn't finding the network - the light is orange
Please can someone help me.
Thanks
Joanna

Please check out the following Apple Support article on how to configure both devices for a roaming network. The "Extend a network" mode on the AirPort Extreme will NOT work in your setup.

Trying to connect from airport extreme to WGT624v3..

I have 3 machines on my network. 2 Microsoft XP machines and 1 MacIntosh G5 Power PC 2 Ghz 1.5 Gig of RAM and 10.4.10 Mac X. I had a netgear router (the one listed in the title) and it's configured to run G only and to use WPA. I configured the router to accept either AES or TKIP. Both of my PCs are great and working fine with the netgear router.
So on Friday I purchased a Airport Wireless card for my G5 desktop. I installed it and updated the drivers to 4.2. I know with WEP using the mac connecting to a netgear you have to put a $ before the password. However that isn't a problem with WPA. I configured a new network location with the correct network name and the correct wpa password. It keeps telling me that it can't connect to network. The Mac does not see the router. It sees one of my neighbors networks, but not mine. I configured it to use channel 11 which is what I am running the netgear off of. Any ideas? Did I explain it enough? Thanks guys.

DawgsRulz, Welcome to the discussion area!
Do you have your router configured to broadcast the SSID? If you do, disable that feature. It doesn't add any security.
If you are unable or won't disable that feature, you will need to go to the AirPort menu and select "Other...". Then you will need to enter the name of your network.

I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

i don't know what i am doing wrong and have tried to follow instructions on the discussion page , set up extend network and shareing on, but i still don't have a green to go on the base station, and either have to be on my 4G telstra network , or back into wi-fi and tick time capsule network. one or the other. i don't understand a lot of this stuff .

leanne5725 wrote:
I have a telstra modem/wireless thingy. Unsure what you mean by using the Apple router as AP only (what do you mean by AP).
AP is access point.. ie wireless point to access the network.. also called WAP.. wireless access point.
Also I keep getting a message saying (PROXY error - the proxy server received an invalid response from an upstream server. The proxy server could not handle the request) - then I go back out, then back in a few times and it works. Also, a box keeps coming up saying (bad gateway), but Ive never had a problem before I had this apple computer.
It is just today.. some proxy has been fixed.. openssl updated?? Anyway.. it is fine now. I could not get on this site at all for the last few hours.. same issue.
What Apple routers do you own now??
You can plug it into the TG797N (wan on apple router.. to LAN on Telstra router) and run it in router bridge..
And create a wireless network..
Then connect your clients to the Apple wireless instead of the TG797N wireless.

Compressor gives extremely long estimated times to compress, and it doesn't work. What is the problem?

Every time I click submit, my copressor starts giving me errors that appear and disappear so fast and I cannot read. Then the compress times keep on going up dramatically.
I am sure my compressor has a problem bit I am not sure what it is.
PLEASE HELP!
Z

Are you sure that you did not install a fake? there are many and they look convincing.
Did you download it yourself from Adobe's website, or was it handed to you by a Black/Red dialog?

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

HELP! Problem with setting up Airport Extreme in "extend wireless network mode"!

So I am trying to put my AirPort extreme in extend a wireless network mode. So I factory reset it, plugged it in, and went into Airport Utility to set it up. So it finds the device, and I set it up to extend the network. It does everything, and it gets set up. But there is an error message that says it was unable to extend the wireless network. Then 1 minute later, the Airport Extreme drops out, and the Airport Utility says device not found. I tried this multiple times, and it keeps happening. What should I do?

Unfortunately, the AirPort Extreme will not be able to wirelessly extend a Netgear product. That feature will only work if you are connecting the AirPort Extreme to another Apple router.
If you want the AirPort Exteme to provide more wireless coverage, you will need to plan to connect it to the Netgear router using a permanent, wired Ethernet cable connection.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

I am trying to hook up a second airport extreme to extend my network. Can I do this without having another ethernet connection?

I am trying to hook up a second airport extreme to extend my wireless network. Can I do this without having a second ethernet connection?

Yes. Apple's instructions to do this are here:
http://support.apple.com/kb/HT4259

I am trying to connect an airport extreme to extend my wifi coverage and it doesn't work

Similar Messages

Maybe you are looking for