I am trying to connect my ipad to the internet via wifi/3g wireless router/wireless dongle..it finds the router but not the dongle connected to it..any help appreciated
HI...just purchased a new ipad 2 16gb wifi only... Was also sold a 3g wireless modem so that i could connect it to my already owned wireless internet dongle.. upon trying to set it up i can get the Ipad to find the wireless router but thats it. When I plug my dongle into the wireless router as i would with my laptop the light goes green as it does when connecting the laptop but thats about as far as I can get...any help appreciated...cheers Brett
There are 3G Moblie Broadband Router i.e. a 3G dongle connected to a 3G router
http://www.aztech.com/prod_3g_hw550.html
Similar Messages
-
I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however if I use my laptop in the same physical locationand using similar procedures I am able to conect.?
What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds). -
My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?
Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?
It depends upon how the other machines are connecting to your MBA:
If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them -
Recently I have lost the ability to access the internet via WIFI with my I Pad one first generation. It blows me off every time I try. I have
tried 6 different WIFI spots to be sure it was not the WIFI at home. Just doesn't work?????I spoke to several other Ipad 1 users who have identical problems...worked well since the original purchase then
recently....no WIFI.?????? -
I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??
Welcome to the Apple Community.
You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud. -
If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???
The wireless on my laptop brokebut I can still connect to my phone when I plug it in. My iphone is connected to the wifi but is this being transfered onto the laptop or is it using up my data???Personal hotspot shares your cellular connection with other devices via cable, bluetooth or WiFi. If you turn on the hotspot, the phone will be disconnected from the WiFi network you are on and share access to the cellular connection. That's what it's for. It's using your data plan if that's what you're trying to do.
-
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
unable to connect to the internet via wifi since the latest update
Hello,
Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care. -
I cannot enable my wifi because it is grayed out. I some of the recommended actions that I could do mannually to turn the wifi on but I'm still having trouble connecting to the internet via Wifi. I am thinking that I have to add a VPN but I don't know exactly what that means. Any suggestions?
Read this. If it doesn't solve your problem, take it to an Apple Store (hardware problem)
-
My Ipad (3rd Gen) has stopped connecting to the internet via Wifi - please help
Ipad will not connect to home wifi network, first I get the error message "safari could not open the page becasue the server stopped working" then after about 5 minutes, Safari cannot open the page.......because your iPad is not connected to the Internet.
Wifi is working (able to connect through Laptop) however, iPad, iPhone and my old iPod Touch all show the same error message.
Have turned iPad Wifi off and back on, nothing, have also tried "forget network", "renew lease" and "reset network settings"I have also completed soft reset of iPad (held down Home Screen button and stand by button) No improvement.
I have turned wireless router off, I have also disabled security on router to see if this is an issue and still get the same message.
Untill 48 hours ago never had a problem..........help greatly appreciatedThis happened to me to, it kinda still does.
Here is a link, mabie this helps you
:https://discussions.apple.com/thread/5305515 -
Curve 9380 unable to connect to the internet via wifi
I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.
Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.
-
What have my iPhone and iPad both suddenly quit connecting to the internet via wifi?
My phone quit connecting to the internet even when connected to an internet enabled wifi network and then a few days later my iPad has quit. I have taken both to other locations where there are wifi networks available and they will not connect to the internet, though they are connecting to the wifi.
Setting/General/Reset - Reset network settings is a good place to start.
-
Mac mini does not connect to the internet via wifi
I currently have a Mac mini that cannot connect to the internet. I also have an iPad that is connected to the same router/modem wirelessly. I have tried the network diagnostic in the network utility app. It is showing I'm connected with green dots.. But still no luck.
Yes I tried calling the ISP, there was some issues with the service but they fixed that and it was working just fine a few hours ago but then later in the evening it stopped connecting. I know my router modem is working because I'm typing this with my iPad ..
Im going to call apple tomorrow and try to get another modem router as we'll. Just thought I would try here also..
if i if I have to restore my Mac mini to factory, will there be a way to keep my iTunes music .. .?
thanksIf yo go to Network Preferences>Wifi what IP address is specified? It should be like 192.168.1.X.
Try creating a new location and jointing the wifi network again
Using network locations (Mac OS X v10.6 and later) -
My macbook pro will not connect to the internet via wifi or ethernet connection
Hey guys just a few days ago randomly my 2011 macbook pro stopped connecting to the internet. My girlfriends macbook still connects fine as well as both of our iphones and my tv. Under network in system prefrences wifi is yellow and says self assigned ip, however ethernet says that it is connected with a green light but safari nor any other internet using applications will work. I even tried downloading google chrome from my girlfriends mac book and moved to my computer via flash drive but still no go on the internet. Please help me.
-thanksPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning not to screw up. You don't need to post the warning. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
Maybe you are looking for
-
Website is not bringing up a Recaptcha when it should.
I am on a website that I have registered for and I am trying to post something but it says that I must put in a Recaptcha code. The problem is, there is no Recaptcha showing up. Someone said I could probably fix it by going to Tools and enabling my "
-
Fake Adobe 24/7 help tech's
Hi: This is a warning. I posted an issue here on Friday and was contacted on Saturday via e:mail. The claimed to be with Adobe24/7 help requested to connect on Skype messaging. The icon on the Skype was Adobe helps. This tech and one that pho
-
OdiReadMail - extract field from and subject in file
Tool odiReadMail extract the body of the message in to file. I wont extract in this file fields form e-mal "from" and "subject". How i can do it?
-
Como puedo ver mis camaras en el iPad, en mi lap con Windows Explorer las veo sin problema. TengO una dirección DNS, para que el navegador la resuelva, pero solo consigo el código escrito.
-
Audio live streaming not smooth
Hi I wrote an application, call radio. It play mp3 and publish signal to livepkgr. I don't know sometime audio-live-stream stop, and wait 1~2s it will be continues play. I sure my connection from client to server is perfect. I read configuring perfor