I am trying to connect to an external projector

I have a 15" Macbook pro running Windows XP Pro bootcamp, I am trying to connect to an external projector using the Mac mini dvi to vga adaptor, I have now tried two different adaptors but still I cannot get the display to work.
Does anyone know if there is an update that needs to be installed or additional drivers that may need to be installed for this to work?
Anyone out there have any ideas?
Thanks
Simon

Thanks to the suggestion of downloading XP Service Pack 3, the problem seems to be resolved!
Jen

Similar Messages

When connecting to an external projector, an old photo is displayed and does not update

When connecting to an external projector, an old image is displayed and will not update. I am working on a 2009 Mac Book Pro.

This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

Imagent.app is trying to connect to an external website. Help needed!

Hi there. I recently downloaded Little Snitch to gauge my current outgoing network traffic. When I booted up my Macbook Pro, the program told me that "imagent" was attempting to connect to a news page that I had left open on my browser. I believe this has to do with facetime, yet i wasnt using it. Could you help me in deciphering the meaning of this? Thank y'all for your help

Aquabolt wrote:
Hi there. I recently downloaded Little Snitch to gauge my current outgoing network traffic. When I booted up my Macbook Pro, the program told me that "imagent" was attempting to connect to a news page that I had left open on my browser. I believe this has to do with facetime, yet i wasnt using it. Could you help me in deciphering the meaning of this? Thank y'all for your help
As you probably know, you can get FaceTime invitations even if you have quit FaceTime. That feature is provided by "imagent".
Unless you have configured the FaceTime > Preferences... > FaceTime setting to "OFF", you are still using "imagent" (and a couple of other support processes) even if you have "Quit" Facetime.
Once you set the preference to "OFF", imagent will go away, but you will not be able to receive any incoming FaceTime invitations until it is turned ON again.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

How do I stop my MacBook Pro from trying to connect to a home Server?

My Macbook Pro keeps trying to connection to an external harddrive server that I run at home when I am not home. I get an error that the server is not available. I checked the console and it gives an error of AFP_GetServerInfo - can not connect 64. I have removed from my favourite servers connections, I have deleted all programs that start automatically but nothing seems to fix the issue. Anyone have any ideas?
I'm running a 2014 13" Macbook Pro with Yosemite 10.10.3.
Cheers,

There are many possible causes for this issue, and it may be very hard to resolve. Please take whichever of the following steps is applicable that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
You may have created aliases to files or folders on the server. If you don't know whether you did that, you can find all aliases as follows.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemContentType=com.apple.alias-file
Copy the selected text to the Clipboard by pressing the key combination command-C.
In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
The search window will now show all aliases on mounted volumes. You can see the target of each alias by selecting it and opening the Info window. Delete any that refer to the server.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
Step 5
Copy the line below to the Clipboard as in Step 3:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
Try rebuilding the iPhoto library, if applicable.
If you get the alert when connecting an iOS device with iTunes, re-create your iTunes library and playlists. See also this discussion.
Step 8
Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
Step 9
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 10
Launch the Directory Utility application. Depending on what version of OS X you have, you may be able to do that by entering the first few letters of its name in a Spotlight search. If that doesn't work, triple-click anywhere in the line of text below on this page to select it:
/System/Library/CoreServices
Right-click or control-click the selected text and select
          Services ▹ Open
from the contextual menu.* A folder named "CoreServices" will open. The Directory Utility application is in that folder, or in a subfolder named "Applications".
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and /Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 11
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Need help connecting to my external HD on a PC remotely.

I'm trying to connect to my external HD over the Internet on a PC. On my Mac, everything is working fine, I'm able to connect using the "File Sharing" ports. But, even though I already activated the "Windows File Sharing" ports, I still cannot connect to the external HD on the PC.
This is what I've done:
1. Set the AirPort Extreme to share an extrenal IP.
2. Turned on all "File Sharing" options, except the Bonjour one.
3. Opened up a "Windows file sharing" port (Public UDP/TCP ports: 1111 -- Private IP Address: 10.0.1.1 -- Private UDP port: 138 -- Private TCP port: 139). I also have a "File Sharing" port opened for Macs, which works fine.
4. Set up a DDNS using dnsdynamic.org so that I don't need to remember my public IP. I use this DDNS to connect to my HD on the Mac, so I think it's working fine.
When connecting on a PC, I do this:
1. Go to Computer > Map a network drive.
2. I type \\<my ddns>:1111\Archieves
But then it says it can't connect. Any help? Did I skip any steps? The volume name "Archieves" is the name of the partition I set up for my extrenal HD, and it is the volume I want to mount on, so that's what I need to type after the " \ " (as on ":1111\Archieves"), right? Anyway, thanks for any help, and please tell me if I need to add any info or clear anything up.

Great news, thanks!
Leopard will be the last OS for PPC Macs, so eventually you'll have to, but I'm thinking Tiger should be compatible for another year or two, but in a couple of years Leopard may no longer be sold by Apple, I'm seeing Tiger Install discs go for $200+ nowadays.

Can't connect to FTP external drive - EA3500

Trying to connect to my external hardrive using FTP app from my phone to test it.
I uncheck the 'filter unwanted traffic box' and even tried switching the port from 21 to 4460.
Can't seem to connect on my iphones brower I get 'server not responding' and any app I use cannot connect.
Using UTF-8 encoding too.
Heres what I type into the browser, "ftp server ip : port"
Any help would be appreciated.

Shouldn't it be?
ftp://192.168.1.1
or
ftp://192.168.1.1:4460
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

Trying to connect external hard drive to AEBS

Hi there,
I'm working on trying to connect my Maxtor 750gb external to my airport extreme. The drive is partitioned into three NTFS segments because it was used to recover an old computer. The AEBS seems to be registering that the HDD is plugged in, however, gives me the error "disk needs repair" and is not showing up in the AirPort Base Station Agent (bottom right taskbar). I searched the forum and saw a couple users with similar errors, however they had Macs and I wasn't sure how relevant that would be to me. I'm using two windows vista PCs to try and connect, one is via ethernet, one via wireless. I've tried connecting the HDD to both computers and repair all three partitions, and none of them have any errors after several repairs. If anyone has any tips on how to get this working, I would greatly greatly appreciate it.

Hello NukeDaFridge. Welcome to the Apple Discussions!
I'm working on trying to connect my Maxtor 750gb external to my airport extreme. The drive is partitioned into three NTFS segments because it was used to recover an old computer. The AEBS seems to be registering that the HDD is plugged in, however, gives me the error "disk needs repair" and is not showing up in the AirPort Base Station Agent (bottom right taskbar).
The problem is the partition format type. The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Unfortunately, NTFS is not a supported format.
(ref: AirPort Extreme (802.11n): USB storage device supported formats and protocols)

Hi, my iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there eny way I can get rid of this?

Hi,
My iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there any way I can get rid of this annoying problem? The bottom line is that I'll stay away from apple, because they basically make it so the devices control you, and you don't control the devices. I've even jail broken to try and fix this. I need my USB drives to work as they have many folders. Formatting doesn't work, so it is definetly down to the software and it's restrictions.
Please help.

The camera connection kit is to be used to connect a camera or an SD card and transfer photos/video. You can't fault them for something that happened to work and doesn't any longer. There are drives like the seagate available if you need access to extra storage
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/goflex -satellite/

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Hi, i tried to connect my mac book pro on my tv. I can't clci kon mirror displays

Hi, i tried to connect my mac book pro on my tv with my hdmi cable but when i click on displays, "arrangement" doesn't appear . Even if i click on detect displays, it doesn't work. Mirror displays doesn't appear on my screen. Does anybody get any idea ?
Thanks a lot for your help
Victoria

Hello Victoria,
It sounds like you are connecting your MacBook Pro with your television, but you are not getting additional options for your external display.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to the internal display. I recommend reviewing the section titled "No video or no signal, image distortion, 'snow,' or flickering" in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

I am trying to connect to an external projector

Similar Messages

Maybe you are looking for