I am trying to create a checkbook register from the numbers temple, the instruction says to click on register then click choose; where is choose?

Where is the choose button when trying to create a checkbook register using the numbers templete?

I assume you are talking about Numbers. If you launch you are presented with template chooser. Highlight your template and in the lower right hand corner-->Choose.
If you are past this point or closed the window you can use the command-shift-N to open the Template chooser.

Similar Messages

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

what's your home version (click help>about) and was that just a warning so you were able to open the file?

Error when trying to create a web service from a wsdl file using jdeveloper

Hello,
I'm using the latest jdeveloper and jdk 6 update 20 on solaris sparc 10.
When I'm trying to create a web service from a wsdl on the java EE 1.5 platform i get the following error:
Validation failed:
java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
I've tried the endorsed mechanism with the latest jaxws-api.jar and jaxb-api.jar packages with no help.
It works fine when i use the java EE 1.4 platform....
The full Error description:
oracle.jdeveloper.webservices.model.WebServiceException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
+     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1635)+
+     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)+
+     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)+
+     at oracle.jdeveloper.webservices.model.java.JavaWebService.setDescription(JavaWebService.java:745)+
+     at oracle.jdevimpl.webservices.wizard.jaxrpc.topdown.TDJaxWsSpecifyWsdlPanel.setDescription(TDJaxWsSpecifyWsdlPanel.java:364)+
+     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)+
+     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$5.run(SpecifyWsdlPanel.java:661)+
+     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)+
+     at java.lang.Thread.run(Thread.java:619)+
Caused by: oracle.jdeveloper.webservices.tools.WsdlValidationException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
+     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)+
+     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:515)+
+     at oracle.jdeveloper.webservices.tools.WebServiceTools.getSeiInfo(WebServiceTools.java:523)+
+     at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1741)+
+     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)+
+     ... 8 more+
Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
+     at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:664)+
+     at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createJAXWSModel(WsdlToJavaTool.java:475)+
+     at oracle.j2ee.ws.tools.wsa.Util.getJaxWsSeiInfo(Util.java:1357)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at oracle.jdevimpl.webservices.tools.wsa.Assembler$2$1.invoke(Assembler.java:218)+
+     at $Proxy34.getJaxWsSeiInfo(Unknown Source)+
+     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:505)+
+     ... 11 more+
Caused by: java.lang.RuntimeException: java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
+     at com.sun.tools.xjc.generator.bean.field.AbstractField.getMRequired(AbstractField.java:186)+
+     at com.sun.tools.xjc.generator.bean.field.AbstractField.annotateReference(AbstractField.java:209)+
+     at com.sun.tools.xjc.generator.bean.field.AbstractField.annotate(AbstractField.java:164)+
+     at com.sun.tools.xjc.generator.bean.field.AbstractFieldWithVar.createField(AbstractFieldWithVar.java:75)+
+     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:89)+
+     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:76)+
+     at sun.reflect.GeneratedConstructorAccessor53.newInstance(Unknown Source)+
+     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+     at com.sun.tools.xjc.generator.bean.field.GenericFieldRenderer.generate(GenericFieldRenderer.java:64)+
+     at com.sun.tools.xjc.generator.bean.field.DefaultFieldRenderer.generate(DefaultFieldRenderer.java:75)+
+     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateFieldDecl(BeanGenerator.java:751)+
+     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateClassBody(BeanGenerator.java:539)+
+     at com.sun.tools.xjc.generator.bean.BeanGenerator.<init>(BeanGenerator.java:241)+
+     at com.sun.tools.xjc.generator.bean.BeanGenerator.generate(BeanGenerator.java:181)+
+     at com.sun.tools.xjc.model.Model.generateCode(Model.java:286)+
+     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:251)+
+     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:85)+
+     at oracle.j2ee.ws.common.tools.databinding.jaxb20.JAXB20TypeGenerator.generateJavaTypes(JAXB20TypeGenerator.java:117)+
+     at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:186)+
+     at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:647)+
+     ... 20 more+
Caused by: java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
+     at java.lang.Class.getMethod(Class.java:1605)+
+     at com.sun.tools.xjc.generator.bean.field.AbstractField.getMRequired(AbstractField.java:184)+
+     ... 40 more+
Thanks,
Roy.

Guys,
You are asking about an issue that was a pain in the nick for me few months ago. The problem is that you won't find mych help here as I figured out that Apex geeks here either did not do much webservices or ended up hating it as i do :) . This is an error that can be due many different reason, let me ask you this:
1- Does your the other system you are trying to call through webservices using HTTPS ?
2- If yes, did you create a valid oracle wallet for that https connection ?
3- Make sure you are using the correct URL ( am sure you do, just double check )
4- If using a proxy, then you have to define that in the web service reference creation page
provide more info and I hope I can help you with this,
Sam
Please reward good answers by marking them correct or helpful!

I have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

i have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

The internet is the internet. if its not working then its something to do with your not allowing cookies from apple's site or they are having issues.

"Trying to create a journal entry of the local BP with foreign amounts" error

I have an addon that needs to set the Total (LC) field on the invoice form when a Delivery is copied to an Invoice. In this case, it's $169,978.62. The original Unit Price on the row is $7,000.00, with quantity of 5 MT (selling UoM). After populating the line total field through SDK UI, it calculated discount% to be -385.653. When I press Add, it gives me red bar error "Trying to create a journal entry of the local BP, with foreign amounts [message 3530-11]". This BP uses local currency and there is no foreign currency involved on this document. If I perform the same action through normal UI without SDK, I can add the invoice without a problem. I know it probably has to do with rounding, but how can I get past this error if I have to set the line total through SDK?

Hi Ronnie,
Glad you have found the issue
Regardss,d
Eric

Trying to create PAL SD DVD from 23.98fps 720P project

I'm trying to create a PAL DVD from a HDV 23.98fps 720P project and am having a few issues. All the footage is PAL and I am converting it to an SD file as it is for an SD DVD however exporting through FCP gives me black frames, using DVD studio pro to convert gives me a freeze frame effect (both of which I assume is through converting 23.98 to 25 fps) so I was told to use Compressor. I tried this but can only seem to render out a 23.98fps file as NTSC, whenever I switch it to PAL it automatically changes to 25fps as my only option.
Any help would be much appreciated as my deadline is looming.

Hi:
Are you sure that your footage is PAL 23.98 fps? I'm not involved with HDV but that sounds like NTSC frames.
What is the source of that footage?
Hope that helps !
Alberto

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

Only visa payment option is highlighted when I am trying to create a new account. I have a MasterCard. When I click on MasterCard, it does not select

Only visa payment option is highlighted when I am trying to create a new account. I have a MasterCard. When I click on MasterCard, it does not select

I tried logging in through ITunes. It's still not selecting other payment options.

My daughter created an itunes apple id but gave the wrong email so now I can't go to the email and verify her itunes account. I tried to create a new email with the email she put in and I can't because its already taken..,..help

My daughter created an itunes apple id but gave the wrong email so now I can't go to the email and verify her itunes account. I tried to create a new email with the email she put in and I can't because its already taken..,..help

Hi JkeeneSoldano,
Thank you for visiting Apple Support Communities.
To regain access to your Apple ID, try to reset your password using one of these methods:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
From:
If you forgot your Apple ID password - Apple Support
If you need to use the email verification method but don't receive the reset email, see this link for more help:
If you didn't receive your verification or reset email - Apple Support
Best Regards,
Jeremy

Can you create a To Do from the Subject line of an email?

Does anyone know if it's possible to create a To Do from the subject line of an email in Mail?
Here's what I'm trying to do. I open a mail message, then I can highlight any text in the body of the message. When I do this, the To Do button becomes enabled. If I highlight the subject of the message, the To Do button remains disabled.
Is there any way of doing this aside from highlighting text, then changing the text?
Thanks!

Open Mail Help from the Help menu. One of the main topics listed is how to create to-dos. Click on it to see what you are able "to do."

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

I am trying to download a free game from the app store. I have never purchased online, I don't want to enter credit card info, can't I download FREE Solitaire w/o entering credit info???

I am trying to download a free game from the app store. I have never purchased online, I don't want to enter credit card info, can't I download FREE Solitaire w/o entering credit info??

This is the only way I now how to create an account without credit card info
http://support.apple.com/kb/HT2534?viewlocale=en_AU

Anyway to create a domain file from the published site?

My friend and I both use iWeb. She created a site and her hard drive has since crashed. I am trying to see if there is a way to make a domain file from what's on the web without going through creating a page again. Any ideas?

Welcome to the discussions. No, there's no way to create a domain file from the published site. If she doesn't have a backup of her Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html
And it may be an opportunity to switch to another site building tool — see this post:
_Domain file - iWeb becoming a headache_

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

I am trying to create a checkbook register from the numbers temple, the instruction says to click on register then click choose; where is choose?

Similar Messages

Maybe you are looking for