I am trying to create new webi report by using Infoview (BO3.1) I am getting error?

Plz check the screen shot
Help on this

HI Riaz Ahmed,
Please check the note 1717315, if its relevant for you.
Issue seems to be with your browser.
BR
Prabhith

Similar Messages

  • Getting an Error WIJ20002 while trying to create a webi report in infoview

    Hi,
    We are getting an error " The Webintelligence Report Panel cannot connect to the server.Close the report panel and try to connect again or see your Business Objects Administrator ( WIJ20002)" only for a single universe.
    Please suggest how can we fix this error.
    Regards
    Chaitanya

    I am giving you couple of scenario based on which this error might occur.I include below a selection of what would seem to be the more relevant ones in your case. Please review these and try the suggested solutions and then let us know the outcome in each case.
    Scenario1:
    When creating a new document based on linked universes in InfoView 6.5.x, the following error message appears:
    "The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 2002)."
    When you click on details, the following error message appears:
    "java.lang.IllegalStateException: Cannot load DS; no ID set
    at com.bo.wp.om.OMDataProvider.getDataSource(OMDataProvider.java:192)
    at com.bo.wp.tc.TCMain.newDocument(TCMain.java:807)
    at com.bo.wp.tc.TCMain.initDocument(TCMain.java:649)
    at com.bo.wp.tc.TCMain.initClient(TCMain.java:1253)
    at com.bo.w.tc.thread.InitAppletRunner.run(InitAppletRunner.java:82)
    at java.lang.Thread.run(Unknown Source)"
    Resolution:
    In Supervisor, the user does not have the Import Universe right in the designer.
    Enable the Import Universe right for the user, and ensure they have rights at the user and group level.
    Scenario2:
    In BusinessObjects version 6.5, when attempting to create a new WebIntelligence report using the Java Query Panel, one of the following error messages appears:
    "The Web Intelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your Business Objects Administrator (Error: WIJ 20002)"
    or
    u201CWeb Intelligence cannot retrieve this document due to a server problem or an error in the document structure. See your Business Objects Administrator".
    Also, the bottom of the Java applet window states Launching new document.
    Resolution:
    The error messages occur because either the universe file name contains an ampersand character (u201C&u201D) in the name or the .unv or .unw files used by the Java Query Panel have become corrupted.
    To resolve the error messages
    Navigate to <installation directory>:/Business Objects/BusinessObjects Enterprise 6/nodes/<server name>/<cluster name>/universes/.
    Remove the .unv file for the derived universe.
    Navigate to <installation directory>: /Business Objects/BusinessObjects Enterprise 6/nodes/<server name>/<cluster name>/universes/<universe domain name>/ucdz.
    Remove the .unw file for the derived universe.
    Remove the ampersand character ("&") from the universe name.
    Scenario3:
    Problem:
    Error: "The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 20002)" when you try to open the Java Report Panel.
    Resolution:
    ****CONFIGURATION*****
    WebIntelligence version 6.1b
    Windows 200 Server SP4
    IIS 5
    JDK 1.42_03
    **********SYMPTOMS******
    You try to open the Java Report Panel and you receive the following error:
    "The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 20002)"
    *********CAUSE*************
    You do not have the correct permissions to access files from the wiasp virtual directory. The virtual directory and all sub-directories were initially configured to use "Scripts only" or "None".
    *********RESOLUTION*****
    Here are the steps to follow:
    1. Open the Internet Information Services Manager Console.
    2. Expand the "Default Web Site" and "wiasp" directories.
    3. Right-click each of the following directories, and in Properties for each, set the respective value for Execute Permissions:
    scripts = "Scripts"
    viewers = "Scripts"
    bin = "Scripts and Executables"
    classes = "Scripts"
    onlineguides = "Scripts"
    help = "Scripts"
    distribution = "Scripts" or "None"
    Scenario4:
    Problem:
    Error: "WebIntelligence Java Report Panel cannot connect to the server (WIJ 20002)" when attempting to create a new report
    Resolution:
    ****CONFIGURATION*****
    WebIntelligence 6.5.x
    **********SYMPTOMS******
    You attempt to create a new report using the Java panel based on a universe. The universe list appears as expected, but upon selecting the universe you receive an error similar to the following:
    "The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (WIJ 20002)"
    *********CAUSE*************
    There is a connectivity issue to the universe and/or document domain. The universe list is still displayed because that information is cached.
    *********RESOLUTION*****
    Here are the steps to follow:
    1. Log into Supervisor as a General Supervisor.
    2. Go to Tools > Repository to open the Repository Management dialog where domain connections are listed.
    3. Test the document and universe domain connections and update where needed to establish connectivity.
    Scenario5:
    Problem:
    Error: "WIJ 20002" when launching the Java Report Panel on a Windows 2003 Server.
    Resolution:
    ****CONFIGURATION*****
    WebIntelligence version 6.5
    Windows 2003
    IIS 6
    **********SYMPTOMS******
    You launch the Java Report Panel on a Windows 2003 Server and receive the following error:
    The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your Business Objects administrator. (Error: WIJ 20002).
    *********CAUSE*************
    This error message appears because ISAPI (Internet Server Application Program Interface) extensions are disabled by default on IIS 6.
    *********RESOLUTION*****
    Here are the steps to follow to enable ISAPI extensions:
    1. Click Start > All Programs > Administrative Tools > Internet Information Services (IIS) Manager.
    2. Expand the "" beside the server name by clicking the "" icon.
    3. Select "Web Service Extensions."
    4. Select "All Unknown ISAPI Extensions" from the right pane and click "Allow."
    5. Restart the IIS web server.
    I know it's a bit long but i hope this will help you to some extent in troubleshooting WIJ2002 Error.

  • Create new webi report services

    hi, would like to know as makes to create a server of Web Intelligence Report Server, for example webir2, currently exists the DGTI-RP6755.Web_IntelligenceReportServer, would like to create one another one, alguem knows as to decide this problem?
    she is necessary to intalar a new server?
    debtor

    Hello,
    Open the Central Configuration Manager (CCM) from "Start > BusinessObjects XI Release 2 > BusinessObjects Enterprise > Central Configuration Manager".
    Click on the "Add Server" button, which will open the Server Wizard.
    Here you can add another Webi Report Server to your Enterprise system.
    Cheers,
    Fritz

  • Unable to create a new WEBi Report in XI R4

    Hi all,
         I am using BO XI R4 , where i can login to Infoview with the credentials and even i can see the home page. But when i click on Create new webi report , it keeps on loading(attached screenshot) and at the end end up saying Session Time out without navigating to New page.
    All the serveres are up and running
    Kindly let me knmow the reason for this and how to resolve the same.
    Thanks in Advance
    Arjun

    Hi Arjun,
    Good Afternoon...!!!
    Please check following things :
    - In which Viewer/Mode (Applet/Web) you are facing this issue?
    - Are you able to create new report in Webi Rich Client (2- tier Mode)?
    - Check whether you are able to see Web Intelligence tab in the BI Launchpad Preference.
    - We have seen this issue in BI 4.1 SP03, The issue occurs due the the BOE License.
    - For testing first Download the Temporary Licence key from service market place.
    - Check whether you can use the Web Intelligence Application or not.
    Hope this will help...!!!
    Regards,
    Veer S.

  • Error in Creating a WebI Report on SAP Source using Rich client in BOxi 3.1

    Hi
    I tried to create a webi report using rich client on sap source. I get a error message " A Database error occured. the Database text is 'unable to connect to SAP BW server name and password is incorrect(repeat logon) (WIS 10901) .
    SAP Integration kit installed
    BO XI 3.1 is installed on windows server 2003
    Application server - Tomcat 5.5 server.
    Any configuration or sap files/folders should be added?
    how can I move forward to solve it ?
    Thanks!
    J.M Raj

    Hi
    Ya I used SAP authentication - then also get same error.
    Connections are created with username, password to access SAP Source
    Thanks!
    J>M>Raj
    Edited by: John Milton on Jun 25, 2009 10:03 AM

  • Using 4.0.2, strange error message when trying to created a webi rep

    Hi all
    I'm getting the error message Protocol message end-group tag did not match expected tag. (WIS 00000) while trying to create a webi report using a unx (Designer Information Design tool)
    full error test below
    This unx is using a 7.1 BW cube, and from the unx toll all looks to be ok
    com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
         at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
         at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
         at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
         at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
         at javax.swing.SwingWorker$1.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at javax.swing.SwingWorker.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.businessobjects.sdk.core.server.ServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
         ... 18 more

    You can still create universe, just not UNX universe.
    If you have upgraded Bi4.0 to Sp01 or SP02 - in IDT it will not let you do that.
    As for docs :
    /people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
    http://smartdirectory.sap.corp:3080/Assets/asset.epx?id=519f2955-0b47-4a0f-81d1-84e8e5303e5e
    http://www.asugnews.com/2011/02/22/sap-businessobjects-bw-integration-to-get-easier-in-bi-4-0/
    https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/139619-38-87308/SDN%20-%20Best%
    /people/ingo.hilgefort/blog/2011/02/10/sap-integration-update-part-5--web-intelligence-40-connecting-to-bex-queries

  • Error while trying to create new assignment with supervisor through API

    Hi Experts,
    I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
    =============================================================
    ORA-20008: Error While Create new assignment..-20001
    ORA-20001: The supervisor assignment that you have entered is invalid.
    Please check that you have entered the supervisor,
    that the supervisor assignment belongs to this supervisor and that the assignment is effective.
    ORA-06512: at line 198
    =============================================================
    This is my script, (Oracle EBS 12.1.1)(DB 11):
    DECLARE
    v_user_id NUMBER;
    v_res_id NUMBER;
    v_res_appl_id NUMBER;
    v_org_now_no_manager_warning BOOLEAN;
    v_spp_delete_warning BOOLEAN;
    v_other_manager_warning BOOLEAN;
    v_tax_district_changed_warning BOOLEAN;
    v_entries_changed_warning VARCHAR(4000);
    v_person_id per_all_assignments_f.person_id %TYPE;
    v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
    v_people_group_id per_all_assignments_f.people_group_id %TYPE;
    v_object_version_number per_all_assignments_f.object_version_number %TYPE;
    v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
    v_group_name pay_people_groups.group_name %TYPE;
    v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
    v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
    v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
    v_assignment_id per_all_assignments_f.assignment_id %TYPE;
    v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
    v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
    v_job_id per_jobs.job_id %TYPE;
    v_grade_id per_grades.grade_id %TYPE;
    v_location_id hr_locations_all.location_id %TYPE;
    v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
    v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
    BEGIN
    v_user_id := FND_GLOBAL.user_id ;
    v_res_id := FND_GLOBAL.resp_id ;
    v_res_appl_id:= FND_GLOBAL.resp_appl_id;
    FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
    BEGIN
    SELECT organization_id
    INTO v_business_group_id
    FROM hr_all_organization_units_tl
    WHERE name = 'Vision University'
    AND language = 'US';
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    FOR R IN (SELECT * FROM xx_assignment) LOOP
    BEGIN
    SELECT assignment_id , ass_f.object_version_number
    INTO v_assignment_id , v_object_version_number
    FROM per_all_assignments_f ass_f, per_all_people_f p_f
    WHERE ass_f.person_id = p_f.person_id
    AND ass_f.business_group_id = p_f.business_group_id
    AND ass_f.business_group_id = v_business_group_id
    AND p_f.employee_number = R.employee_number
    AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
    AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT job_id
    INTO v_job_id
    FROM per_jobs
    WHERE trim(lower(name)) = trim(lower(r.employee_job))
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT grade_id
    INTO v_grade_id
    FROM per_grades
    WHERE trim(lower(name)) = trim(lower(r.employee_grade))
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT location_id
    INTO v_location_id
    FROM hr_locations_all
    WHERE trim(lower(description))= trim(lower(r.employee_location))
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT payroll_id
    INTO v_payroll_id
    FROM pay_all_payrolls_f
    WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT pay_basis_id
    INTO v_pay_basis_id
    FROM per_pay_bases
    WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
    END;
    BEGIN
    SELECT person_id
    INTO v_person_id
    FROM per_all_people_f
    WHERE employee_number = r.supervisor_number
    AND business_group_id= v_business_group_id;
    SELECT assignment_id
    INTO v_sup_assignment_id
    FROM per_all_assignments_f
    WHERE person_id = v_person_id
    AND business_group_id = v_business_group_id;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
    end;
    BEGIN
    hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
    p_datetrack_update_mode => 'CORRECTION',
    p_assignment_id => v_assignment_id,
    p_validate => FALSE,
    p_called_from_mass_update => NULL,
    p_grade_id => v_grade_id,
    p_position_id => NULL,
    p_job_id => v_job_id,
    p_payroll_id => null,--v_payroll_id,
    p_location_id => v_location_id,
    p_organization_id => v_business_group_id,
    p_pay_basis_id => v_pay_basis_id,
    p_segment1 => NULL,
    p_segment2 => NULL,
    p_segment3 => NULL,
    p_segment4 => NULL,
    p_segment5 => NULL,
    p_segment6 => NULL,
    p_segment7 => NULL,
    p_segment8 => NULL,
    p_segment9 => NULL,
    p_segment10 => NULL,
    p_segment11 => NULL,
    p_segment12 => NULL,
    p_segment13 => NULL,
    p_segment14 => NULL,
    p_segment15 => NULL,
    p_segment16 => NULL,
    p_segment17 => NULL,
    p_segment18 => NULL,
    p_segment19 => NULL,
    p_segment20 => NULL,
    p_segment21 => NULL,
    p_segment22 => NULL,
    p_segment23 => NULL,
    p_segment24 => NULL,
    p_segment25 => NULL,
    p_segment26 => NULL,
    p_segment27 => NULL,
    p_segment28 => NULL,
    p_segment29 => NULL,
    p_segment30 => NULL,
    p_employment_category => NULL,
    p_concat_segments => NULL,
    p_grade_ladder_pgm_id => NULL,
    p_supervisor_assignment_id => v_sup_assignment_id,
    p_people_group_id => v_people_group_id,
    p_object_version_number => v_object_version_number,
    p_special_ceiling_step_id => v_special_ceiling_step_id,
    p_group_name => v_group_name,
    p_effective_start_date => v_ass_effective_start_date,
    p_effective_end_date => v_effective_end_date,
    p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
    p_spp_delete_warning => v_spp_delete_warning,
    p_entries_changed_warning => v_entries_changed_warning,
    p_tax_district_changed_warning => v_tax_district_changed_warning,
    p_other_manager_warning => v_other_manager_warning);
    EXCEPTION
    WHEN OTHERS THEN
    RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
    END;
    END LOOP;
    COMMIT;
    END;
    Thank you & Best Regards

    I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
    SELECT person_id
    INTO v_person_id
    FROM per_all_people_f
    WHERE employee_number = r.supervisor_number
    AND business_group_id= v_business_group_id;
    SELECT assignment_id
    INTO v_sup_assignment_id
    FROM per_all_assignments_f
    WHERE person_id = v_person_id
    AND business_group_id = v_business_group_id;
    Potential Problems/Clarifications
    1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
    2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
    3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
    4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
    This would work better for you:
    SELECT paaf.assignment_id
    INTO v_sup_assignment_id
    FROM per_all_people_f papf
    ,per_all_assignments_f paaf
    WHERE papf.employee_number = r.supervisor_number
    AND papf.business_group_id = v_business_group_id
    AND nvl(papf.current_employee_flag, 'N') = 'Y'
    AND trunc(sysdate) BETWEEN
    papf.effective_start_date AND papf.effective_end_date
    AND papf.person_id = paaf.person_id
    AND paaf.assignment_type = 'E'
    AND paaf.primary_flag = 'Y'
    AND trunc(sysdate) BETWEEN
    paaf.effective_start_date AND paaf.effective_end_date;
    If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
    Does that help?

  • Can't create new Web Intelligence documents

    Hello,
    Only user Administrator can create new Web Intelligence documents on Infoview at my Installation.  I 've created a new group called GROUP1. This group has  Full Control acces level on folders, universes and conections like group Administrators. A user from group GROUP1 can't create new document Web Intellingence. Also, when I have joined this user to Administrators group, then this user was allowed to create a new Web Intellingence document.
    Could anybody help me?
    Thank you in advance,
    Jaume

    please check the rights for GROUP at application level.
    I thinck you are not are not grated the rights for the Group 1 for teh Webintelligence applicaton,

  • Error while running Webi report that uses Custom Dimension object(SAP BW)

    Hi,
    I have a universe that is based on SAP BW.I have created a custom dimension object that displays the maximum date.
    The object syntax is
    <expression>Max(@Select(CPS Online\Calendar day))</expression>
    The object parses successfully.
    The object 'Calendar Day ' is a defaultobject created during universe creation from the BW query.It is defined as [0CALDAY].[LEVEL01]
    I tried  to create a Webi report using this object and a measure .On running the query it throws the following error:
    A database error occured. The database error text is: The MDX query WITH MEMBER [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22] AS ' Max{[0CALDAY].[LEVEL01]} '  SELECT  { [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22], [Measures].[4JCOSFOKKCUR3RMBPNROFKQQD] }  ON COLUMNS , NON EMPTY [0CALDAY].[LEVEL01].MEMBERS DIMENSION PROPERTIES [0CALDAY].[20CALDAY] ON ROWS FROM [ZCCPSONL/ZCPSONLINE]  failed to execute with the error Invalid MDX command with (. (WIS 10901)
    I have tried every possible syntax I could think of but I keep getting this error each time.I have set the object type to Number (even though it is actually a Date), I have tried writing the MDX inside the Max instead of the @select , but nothing seems to work.Could anyone please let me know why this error is occuring?Is there anything wrong with the syntax or is there any setting in Webi needed before a custom dimension object can be used on it.

    Can you see data for Custom object @ BEx level??
    YES, then just try to re-create the same variable and Save the BW query.
    Now do View - refresh Strusture @ Universe. And you can see Filter for the same, just Parse it, just whether it is OK or not.
    OK -- then Export the Universe and create WebI reports, this will come as Prompt.
    Hope it will helps you.
    Thank You!!
    Sent from iPhone

  • Errors creating a Web Service Proxy using Microsoft WSDL.exe tool

    I have deployed a BPEL process using JDeveloper. This process can be invoked from the BPEL console and completes as expected. I am trying to create a Web Service Proxy using the Microsoft WSDL.exe tool so that the process can be invoked from a Microsoft Word document. This process is based on the AutoLoan example in the Developer's Guide for Microsoft Office Interoperability B25781-01.
    WSDL.exe returns the following error message
    Error: There was an error processing 'http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl'.
    - The document at the url http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl was not recognized as a known document type. The error message from each known type may help you fix the problem:
    - Report from 'WSDL Document' is 'There is an error in XML document (19, 7).'.
    - A schema with the namespace '' has already been added.
    - Report from 'DISCO Document' is 'Discovery document at the URL http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl could not be found.'.
    - The document format is not recognized.
    - Report from 'XML Schema' is 'Expected Schema root. Make sure that the root element is <schema> and the namespace is 'http://www.w3.org/2001/XMLSchema' for an XSD schema or 'urn:schemas-microsoft-com:xml-data' for an XDR schema. An error occurred at , (2, 2).'.
    How do I resolve this error?

    The WSDL file is below.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <definitions name="HonorariumSmartDoc" targetNamespace="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/HonorariumSmartDoc">
    - <types>
    - <schema xmlns="http://www.w3.org/2001/XMLSchema">
    <import namespace="http://xmlns.oracle.com/HonorariumSmartDoc" schemaLocation="HonorariumSmartDoc.xsd" />
    </schema>
    - <schema xmlns="http://www.w3.org/2001/XMLSchema">
    <import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://erp.template.co.uk:8889/orabpel/xmllib/ws-addressing.xsd" />
    </schema>
    </types>
    - <message name="HonorariumSmartDocResponseMessage">
    <part name="payload" element="tns:HonorariumSmartDocProcessResponse" />
    </message>
    - <message name="HonorariumSmartDocRequestMessage">
    <part name="payload" element="tns:HonorariumSmartDocProcessRequest" />
    </message>
    - <message name="WSARelatesToHeader">
    <part name="RelatesTo" element="wsa:RelatesTo" />
    </message>
    - <message name="WSAReplyToHeader">
    <part name="ReplyTo" element="wsa:ReplyTo" />
    </message>
    - <message name="WSAMessageIDHeader">
    <part name="MessageID" element="wsa:MessageID" />
    </message>
    - <portType name="HonorariumSmartDocCallback">
    - <operation name="onResult">
    <input message="tns:HonorariumSmartDocResponseMessage" />
    </operation>
    </portType>
    - <portType name="HonorariumSmartDoc">
    - <operation name="initiate">
    <input message="tns:HonorariumSmartDocRequestMessage" />
    </operation>
    </portType>
    - <binding name="HonorariumSmartDocBinding" type="tns:HonorariumSmartDoc">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <operation name="initiate">
    <soap:operation style="document" soapAction="initiate" />
    - <input>
    <soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
    <soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
    <soap:body use="literal" />
    </input>
    </operation>
    </binding>
    - <binding name="HonorariumSmartDocCallbackBinding" type="tns:HonorariumSmartDocCallback">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <operation name="onResult">
    <soap:operation style="document" soapAction="onResult" />
    - <input>
    <soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
    <soap:body use="literal" />
    </input>
    </operation>
    </binding>
    - <service name="HonorariumSmartDocCallbackService">
    - <port name="HonorariumSmartDocCallbackPort" binding="tns:HonorariumSmartDocCallbackBinding">
    <soap:address location="http://set.by.caller" />
    </port>
    </service>
    - <service name="HonorariumSmartDoc">
    - <port name="HonorariumSmartDocPort" binding="tns:HonorariumSmartDocBinding">
    <soap:address location="http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0" />
    </port>
    </service>
    - <plnk:partnerLinkType name="HonorariumSmartDoc">
    - <plnk:role name="HonorariumSmartDocProvider">
    <plnk:portType name="tns:HonorariumSmartDoc" />
    </plnk:role>
    - <plnk:role name="HonorariumSmartDocRequester">
    <plnk:portType name="tns:HonorariumSmartDocCallback" />
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>

  • Webi report issue(BO Infoview)

    Hi Gurus,
    I created a webi report in BO infoview using an universe. But when I run the report it does not display any data , it shows only blue and yellow color table in the report display panel. Any help I would appreciate it.
    Thanks
    Liza

    It appears to be a java version issue:
    The specified item was not found.

  • Create a Webi report using QAAWS as a data source

    Hi Experts,
    I am on BO 4.1 SP 3, and using the Webi Rich Client to create a WEBi report using a QAAWS url as a data soruce.
    This is the first time I am trying this, so any tips/helpful links are welcome.
    I get the below error, when I try to map the fields. But I do not have any personal data files involved.
    Thanks,
    Vasu Natari.

    Hi Vasu,
    We can create webi report with QAAWS.When creating the report on webservices /Personal data providers we'll not get prompt/query filters option .
    Are you trying to change source ? Instead create new source and get data.

  • Error when trying to display a Webi report through the Folder iView

    Hi all
    I am getting the following error when Im trying to display a Webi report through the SAP Portal. We have installed the SAP Integration Kit and are able to see the content of the Infoview. However when we click on a Webi report, we receive the following error:
    Could not get page number. (Error: RWI 00223) (Error: INF)
    Have anyone else encountered this problem? Please assist! Any help will be rewarded.
    (We are running XI Rel 2).
    Addition from trace file (tomcat):
    com.businessobjects.rebean.wi.CommunicationException: Could not get page number. (Error: RWI 00223)
         at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.setBlobKey(OccaReportComAdapter.java:542)
         at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:376)
         at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:297)
         at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:384)
         at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:407)
         at org.apache.jsp.viewers.cdz_005fadv.viewReport_jsp._jspService(viewReport_jsp.java:1182)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
         at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:670)
         at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:637)
         at org.apache.jsp.viewers.cdz_005fadv.report_jsp._jspService(report_jsp.java:325)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    Furthermore I'd like to see an example of the cms_name entry. The documentation states: In addition, specify the Application Parameter for each iView. For this property, enter cms_name=[cms] for the fully qualified server name., but I have doubts as to what format to use.
    Kind regards,
    Martin Søgaard

    Hi Jim Ji
    The report can be displayed from the java infoview, no doubt, so the report itself works.
    But the report cannot be seen from the "SAP Infoview" (:/businessobjects/enterprise115/sap) which is the infoview, I reference from the Folder iView (through the system in the SAP portal). And since the SAP Portal Integration Kit seems very old - the Folder iView was created 12-08-2004 by Ingo Hilgefort - there might be an old version of the jar-files somewhere in the installation.
    I guess I should check the version of the jar-files in WEB-INF/lib of our web application (Tomcat) folder, and see if they have been overwritten by the SAP Portal Integration Installation or are an older version of the files in Program FilesBusiness Objectscommon3.5javalib? And also check if somewhere in the .../sap installation there are some old jar-files?
    Kind regards,
    Martin Søgaard

  • Error in Creating New Web Application SharePoint 2013

    Everything was working fine but today when i try to create  a new web application i am getting the following error.It's happening whenever i am trying to create a new web application.
    The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is already being used by another IIS Web Site.  Choose a different root directory for your new Web application. 
    But this port 26060 was not being used before and if i try to create new web application again then the error message occurs with the port number of the new web application. 
    Please help.

    Hi HelloFragrance,
    Are you using a host header when creating these web apps? If so have you tried creating without a host header? Also are you logged in with the Server with the Admin account? Check this out: (taken from Jeremy Taylor's
    blog)
    " 1. Ensure you have a proper dns name / entry in the hosts file of your server for the new url you are wanting to create.
    2. Ensure you have typed in the ‘host header’ typed in when creating the new web application.
    3. If this doesnt work, open IIS Manager – Start>run> inetmgr> and verify the home directory – it could be located on a different drive."
    Also have you tried creating through Powershell and see if you run into the same issue or not?
    http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx
    Hope this helps!
    Thanks!
    BlueSky2010
    Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
    "Mark As Answer"

  • Unable to create a webi report and 3 times it prompting for logon credentai

    Hi,
    We have a issue,
    1.We are  unable to create a webi report and 3 times it is prompting for logon credentials.
    3.After giving the logon credentials 3 times then it is working fine.
    4.We are  using IIS Jakarta redirector .
    5.We are  able to view the webi documents successfully ,the issue occurs only when we  create a new webi report.
    Any one please help me on this issue.
    Thank you in advance.
    Environment u2013
    BOXI3.1,
    SSO,
    IIS Jakarta redirector.
    Thanks & Regards,
    Powell.

    bypass IIS and jakarta (go to tomcat directly with an enterprise account like administrator), does the issue still exist?
    Regards,
    Tim

Maybe you are looking for

  • Cannot update data from DSO to Cube with further update in process chain

    Hi Guys,               This is the message am getting when am trying to update to cube by process further update with process chain.Process fails at further update with the following below message. However at DSO level i can see the data mart status

  • FAGLGVTR

    Dears        I need your help regarding the following issue; I used transaction FAGLGVTR  to carry fwd balance, the system stated that balance carry forward completed successfully, however, when I went to Tcode FBL3N, I found the balance of the RE  a

  • Using of zero balance a/c ?

    Hi all, i am workig on ECC 6.0. my question is " why should we usd 'ZERO BALANCE G/L ACCOUNT' in ECC 6.0. what is the purpus and impartence of that in this version. Thanku

  • Need help with datepicker

    Hello, For my application i need to take the dates a user enters in a form and set reminders for it i.e in a calendar that date should be highlighted and here i have a calendar program where the calendar is implemented in the form of tables i.e the d

  • No surround mixer support for Audigy 4

    I have spent about 3 hours trying to find ways to get surrond mixer to work, and i dont have the cd. It looks like creative didnt even put any support on their downloads for managing speaker channels. Which makes the card useless for people who want