I am trying to create within my modules a place for learners to contact me

I am trying to create within my modules a place for learners to contact me to ask questions as well as submit long answers to questions, preferably through email. I could not get the email function on the button to work. I have Captivate 6. I even tried to open a file as well as open a document (such as Notepad) and that did not work either for me. Does anyone have any ideas how I can create this form of contact (it does not necessarily have to be through email) for my learners? I am just learning Captivate (I have taken boot camp but it was almost a year ago). Thanks in advance for any and all help!

I would simply use a Click Box to achieve this. Create a piece of graphics or a text caption with your text such as "Click here to email me". The place a Click Box on top of this and set the On Success action (in the property inspector) to "Send e-mail to" and enter your email address in the Address field.
That should do the trick.
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more..

Similar Messages

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

I am trying to find a function module or BAPI for internal order change. I

I am trying to find a function module or BAPI for internal order change. I did come across a function module ALE_INTERNALORDER_DB_CHANGE which directly updates the internal order using insert statements. Can i use this for internal order change or this is any other Function module for updating the internal order.
I dont want to use BDC as a option. Please suggest.

This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials

I am trying to create a polygon shape and place an image inside of it.

I am trying to create a polygon shape and place an image inside of it similar to this: http://media-cache-ak0.pinimg.com/originals/1f/47/51/1f4751aeb7c30099e4caf61393990fca.jpg
How do I go about doing it? Thanks!

Hi
You would need to design the image outside of Muse using any image editor like photoshop , where apply polygon frame on top of the image and area outside shape should match the color of the image of page, then insert the image on Muse page, it would be same effect. Currently we cannot create any shape in Muse , but you can try some customization using custom code.
Thanks,
Sanjit

Trying to create and save a new site for the Bayside Beat tutorial but am having trouble

trying to create a new site as explained by David Powers in this tutorial but I am already getting hung up.
It tells me to go to site and then to New Site. I do that and type in Bayside Beat on the first line. (as soon as I do that you notice a red X on the right side of Bayside Beat.)
I'm told to Browse for my folder which is on my desktop and click ok. When I press SAVE another window pops up.
This time it tells me another site is named Getting Started and I'm asked to enter a different name.
Question, where is this other site that is named Getting Started? What name do I call it now!?
So I rename the site name San Francisco and press SAVE and another window pops up.
This time it tells me I may have further problems still...What am I suppose to do?

Do you mean, are the contents still in the original folder or was it transferred to a new folder?
Does it make a difference if it’s in the original folder?
Ralph Fujiwara
Graphic Designer
5 Revere Drive, Suite 206 | Northbrook, IL 60062
Direct: 847.849.2968 | EFax: 847.897.0768
[email protected]

Trying to create new pencils in Adobe Brush for use in Adobe Sketch

I'm really impressed with Adobe brush. I figured I would create some new pencil thicknesses for Adobe sketch. They've come out ok but only really work with long straightish lines. If I try and do smaller curved lines I have a couple of issues. Sometimes the lines just don't come out at all or they're super faint. Other times the line starts off where I want but sort of 'corrects' itself to a different line as I draw.
I've tried changing brush settings but not really seeing much difference. Do you have any tips on sorting this out? A tutorial showing how to make pencil/crayon type brushes would be amazing

In Adobe Brush:
Properties:
Try to make the spacing smaller.
I find smaller sized brushes make for better resulting curves in Sketch.

Creating an application module in a Java class

Hi everyone,
I'm trying to create an application module from a normal Java class where I don't have access to any HttpSession objects.
I tried to use the method in the documentation
appMod = Configuration.createRootApplicationModule(
                    "full.class.Name",
                    "ConfigurationName");
It's not working though, complaining that it can not find the configuration file which it's trying to locate at full/class/common/bc4j.xcfg.
This file exists at the same path in the BC4J project which this project has a dependency on in the Project Settings dialog.
Is this the right way to create an application module? Can someone please provide a reference to an example.
Thanks

Thanks Frank, but this example is about a stand-alone application, my problem occurs with an application hosted on the application server.
I did more experiments and came up with some ideas but unfortunately, I hit a dead end.
I thought that in order to work around the fact that I cannot set the class loader of the timer, I could change the class loader of the running thread before I create the timer as follows:
Thread.currentThread().setContextClassLoader(
          this.getClass().getClassLoader());
I thought this would give me a SecurityException for sure, but strangely enough it worked perfectly.
Now, all I needed was to move this code from the JSP to my listener. Unfortunately, it didn't work in the listener, also a test that I did in the JSP to make sure that the classloader before and after the above statment is different, showed that in the listener, the classloader of the thread is the same as the one used to load the listener class:
System.out.println(Thread.currentThread().getContextClassLoader()
          .equals(this.getClass().getClassLoader()));
I thought, maybe this is a listener thing, but if I do it in the init() method of a servlet that I could specify to load on startup, it could work, but still, it didn't.
I cannot understand, why is it that the only correct class loader is the one used to load the compiled JSP class?!
Does anyone have any other ideas?
Thanks

I am new to using Oracle, and I am trying to create an add/insert stored pr

I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
Table definition:
CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
USERID VARCHAR2(40) NOT NULL,
PROD_CD VARCHAR2(9) NULL,
PLAN_CD VARCHAR2(9) NULL,
STATE_LST VARCHAR2(2) NOT NULL,
STATE_NM VARCHAR2(40) NOT NULL,
LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
-- Grant/Revoke object privileges
grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
Stored Procedure Definition:
procedure setUserPlanPref (
userid in varchar2,
prod_cd in varchar2,
plan_cd in varchar2,
state_lst in varchar2,
state_nm in varchar2
is
currentTimestamp timestamp := current_timestamp;
begin
insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
commit;
exception
when dup_val_on_index then
begin
update user_plan_preference up set
up.userid = upper(userid),
up.prod_cd = upper(prod_cd),
up.plan_cd = upper(plan_cd),
up.state_lst = upper(state_lst),
up.state_nm = upper(state_nm),
up.lst_update_ts = currentTimestamp
where up.userid = upper(userid)
and up.prod_cd = upper(prod_cd)
and up.plan_cd = upper(plan_cd);
commit;
exception
when others then
rollback;
end;
when others then
rollback;
end;
end;
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

938319 wrote:
I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
commit;
exception
when others then
rollback;
end;
when others then
rollback;Remove it all.
Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

"application descriptor not found" when trying to create .ane file

I have been trying to create a very simple native extention for the better part of a week now and I just can't seem to figure it out.
Using tutorials and guides from the following sources:
http://www.adobe.com/devnet/air/articles/extending-air.html
http://www.adobe.com/content/dam/Adobe/en/devnet/devices/pdfs/DevelopingActionScriptExtens ionsForAdobeAIR.pdf
http://custardbelly.com/blog/2011/09/21/air-native-extension-example-ibattery-for-ios/
I managed to get up to the point where I need to create the ane file, but I am getting "application descriptor not found".
So, here is the detailed explanation of everything I have done to date. Can someone tell me where I have gone wrong?
1. On the mac, I created an xcode project, using the iBattery example code from the link above, I managed to create static library .a file. I am not going to discount the possiblity that there are many errors still in this file, but I am going to assume for the moment that my current problem is not related to any issues in this static library.
2. Copied the static library "DaveExtention.a" to my PC where I have flash CS5.5 installed (yes, I know there is a typo in the name)
3. In my app folder, I created a lib folder that now contains the following files:
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\DaveExtension.fla
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\DaveExtension-app.xml
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\com\extensions\DaveExtension\DaveExtension.as
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\com\extensions\DaveExtension\BatteryStateEnum.as
I set my project to compile an swc into the build folder and simply put the following code into my project:
import com.extensions.DaveExtension.BatteryStateEnum;
import com.extensions.DaveExtension.DaveExtension;
var ext:DaveExtension = new DaveExtension;
var batterystate:BatteryStateEnum;
stop();
I then publish the swc.
4. Once the swc is created in the build folder, I copy the libDaveExtention.a to the build folder and create the extension.xml file, which looks like this:
<extension xmlns="http://ns.adobe.com/air/extension/2.5">
<id>com.extensions.DaveExtension</id>
<versionNumber>1</versionNumber>
<platforms>
    <platform name="iPhone-ARM">
        <applicationDeployment>
            <nativeLibrary>libDaveExtention.a</nativeLibrary>
            <initializer>ExtInitializer</initializer>
            <finalizer>ExtFinalizer</finalizer>
        </applicationDeployment>
    </platform>
</platforms>
</extension>
5. I make a copy of the swc file and rename it to .zip... I then extract library.swf from it and delete the zip. My build folder now looks like this:
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build\DaveExtension.swc
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build\extension.xml
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build\libDaveExtention.a
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build\library.swf
6. I downloaded the flex 4.5.1.21328 sdk and the Air 3.0 sdk, which I copied into the flex sdk folder (which is located in "D:\SDKs\flex_sdk_4.5.1.21328")
7. In my build folder, I create a simple batch file called buildane.bat with the following command:
D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
8. I then open a command prompt to my build folder and run buildane.bat and this is my output:
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>buildane.bat
D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
application descriptor not found
No matter what I try, I can't get passed this.
Can anyone tell me what I am doing wrong?

>>D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
Either its a typo or by mistake you wrote adl in yout bat file. Change it to adt since that is the file that will package your ane. adl is just used for debugging/running on Desktop.
Hope this helps. let me know how it goes.
Thanks,
Meet

Application hangs while trying to create a socket

Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02

It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.

ORA-25175 when trying to create materialized view, organization index SOLV

Hi,
I'm trying to create a materialized view to compensate for non-normalized table.
I have table anormal, and mv is to be on distinct agency, company in that table.
Here goes:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
NLSRTL Version 10.2.0.3.0 - Production
SQL> create table anormal (company varchar2(8) not null
2                       ,dept varchar2(8) not null
3                       ,agency varchar2(8) not null
4                       ,constraint anormal_pk primary key (company,dept));
Table created.
SQL> insert into anormal values('c1', 1, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 2, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 3, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 1, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 2, 'Acme');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from anormal;
COMPANY DEPT     AGENCY
c1       1        Ajax
c1       2        Ajax
c1       3        Acme
c2       1        Acme
c2       2        Acme
SQL> create materialized view agency_comp_mv
2 organization index --primary key (agency, company)
3 build deferred
4 refresh on demand
5 as
6 select distinct agency, company from anormal
7 /
select distinct agency, company from anormal
ERROR at line 6:
ORA-25175: no PRIMARY KEY constraint found
SQL>The error tells me that there is no primary key, but is there any way to add such?
- or is my problem rather that I cannot use DISTINCT with organization index?
Regards
Peter
bump
Message was edited by:
Peter Gjelstrup
<SOLVED>
Message was edited by:
Peter Gjelstrup

Thanks William,
I tried with ON PREBUILT TABLE, just to see what happens.
Building on my OP:
SQL> create table iot(agency varchar2(8) not null, company varchar2(8) not null
2                  ,constraint iot_pk primary key (agency,company))
3 organization index;
Table created.
SQL> insert into iot select distinct agency, company from anormal;
4 rows created.
SQL> commit;
Commit complete.
SQL> create materialized view iot on prebuilt table
2 as
3 select distinct agency, company from anormal;
Materialized view created.
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1
SQL> insert into anormal values('c3', 2, 'Foo');
insert into anormal values('c3', 2, 'Foo')
1 row created
SQL> select * from anormal;
COMPANY DEPT     AGENCY
c1       1        Ajax
c1       2        Ajax
c1       3        Acme
c2       1        Acme
c2       2        Acme
c3       2        Foo
6 rows selected.
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1
3 rows selectedNow, try to refresh and MV
SQL> alter materialized view iot refresh complete;
Materialized view altered.
SQL> select object_type, to_char(last_ddl_time, 'hh:mi:ss'), status
2    from user_objects where object_name = 'IOT';
OBJECT_TYPE         DDL_TIME STATUS
TABLE               10:40:42 VALID
MATERIALIZED VIEW   10:41:13 VALID
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1Agency "Foo" is not in MV,
Looks like that IOT select'ed from is indeed the MV:
SQL> drop table iot;
drop table iot
ERROR at line 1:
ORA-12083: must use DROP MATERIALIZED VIEW to drop "STIK"."IOT"
SQL>So, seems that Maxim is right, it just can't be done. And it seems my options are:
Create HEAP organized MV or
Create and maintain IOT
Regards
Peter

While trying to create a Quest.template in eRec portal"Internal error occur

I was trying to create a questionnaire and define scales for an application wizard in eRec portal, while trying to do I am getting "An internal error occured.Please try again.
Regards,
Selva

HI,
Sorted the issue.The questionnaire and scales were defined and then should have followed the steps:
Set up Categories
Update Categories &
Transport categories.
The above 3 should have been followed to other system in which the TR has been made.Even though when you execute TR categories you will not get the request to save but follow the steps. If these steps are followed the error will not occur.
While transporting any configuration changes wrt eRec.plz.check the above is followed and captured in the TR.
Regards,
Selva

Saving/storing/exporting bitmaps created within .swf's on the user's harddrive or a server

Hello,
I know you can store variables in shared objects. Is there a way to save bitmaps created within the swf?
So for example
var myBitmap:BitmapData = new Bitmap(... etc.);
//saveBitmap(myBitmap, "C:\...") ???
Thanks?

you're welcome.
p.s. here's a link to the as2 solution i've used before, Quasimondo - Mario Klingemann's Flash Blog: Flash BitmapExporter: Compress and Save Images
(p.s when using the adobe forums, please mark helpful/correct responses, if there are any.)

How to create a second OracleBIApplication in WebLogic for OBIEE 11g?

I want to create a second OracleBIApplication in WebLogic for OBIEE 11g. The default one is called "coreapplication". I can create a new one but it doesn't show up in Enterprise Manager. Anyone can help?

I have been trying to create a second OracleBIApplicatino in WebLogic for OBIEE 11g without success. I don't want to end up installing it twice as it is going to consume a lot of resources and also because I want to have a single WebLogic Domain. Has anyone faced the same situation?
What about deploying the "analytics" web application as a new web application with a different context-root (e.g. analytics_test)? I am also trying but I can't make it work. Anyone available to help?

Create 10 different TEXTFIELDS with a FOR statement

Hello everybody, I,ve been trying to create 10 different
TEXTFIELDS with a FOR statement, in order to apply different
properties to each one. First I tried this code:

Hi - your first one is closer; the problem is that you are
only creating one TextField and merely changing the properties of
the same one each time through the loop, and you are trying to add
the same one 10 times to the stage.
You probably want to do something closer to:

I am trying to create within my modules a place for learners to contact me

Similar Messages

Maybe you are looking for