I am trying to delete the data from the info cube.

Hi All,
i am trying to delete the data from the info cube.in cube reporting symbol is availble.when i click on delete button delete symbol is coming again when i click on refresh button request is not deleting .please give me solution .
Thanks,
chandu

Hi,
Also try to delete in Data Mart Status.
R u deleting particular request or the entire data in cube, if entire data then right click on Cube select Delete Data, it entirely deletes Data.
Hope it helps you...Let us know if you still have any issues.
Reg
Pra

Similar Messages

After last icloud backup, unrequested by me public holidays in the UK have been marked on the calendar and I can't find how to delete this. Also, I have been trying to delete a birthday from the same calendar for months and it keeps reappearing.

iPad 2 with iOS 7.01 After the last backup to Icloud, unrequested by me, my calendar has been filled with public holidays of the UK which there doesn't seem to be any way of deleting. Also, I have been trying to delete a birthday from the calendar for months, this time using all variations of 'delete' and it keeps popping up again!

Are you also restoring from your backup? That sounds like what is happening or someone else has your Apple ID.
A backup to iCloud would have no way to add UK holidays to your calendar. Open Calendar, tap on Calendars at the bottom middle of the page and untick the ones you don't want.

Can I restore the deleted statistical data from the database tables?

Hi all,
I have deleted the statistical data from the database tables like(Ex: RSDDSTAT, RSDDSTATWHM,..) by mistake through RSA1> Tools> BW Statistics for Infoproviders--> Delete.
Is there any way to restore the deleted data back? Thanks in advance.

Now I'm really confused-
Your first post said
"I have deleted the statistical data from the database tables like(Ex: RSDDSTAT, RSDDSTATWHM,..) by mistake through RSA1> Tools> BW Statistics for Infoproviders--> Delete."
but your last respsonse said
"I have deleted the BW Statistics data, not the actual data in RSDDSTAT tables through
RSA1 -> Tools -> BW Statistics for InfoProviders -> clicked 'Delete' bin to delete data."
If you used the RSA1 -> Tools -> BW Statistics for InfoProviders -> clicked 'Delete' - then you deleted the data from the RSDDSTAT tables. This assumes you accepted the default date range that would have popped up after the clicking on the Delete button which specified to delete thru the current date. If this is what you did, the data is gone. Your only hope is be to recover from a DB backup.
The data in the RSDDSTAT tables is what is used to feed the BW Statistics cubes, generally on a daily basis.

Regarding Loading the data from DSO to cube.

Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
Thanks

Hi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date date;
v_end_date date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
 a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id stage_bill.batch_id%TYPE;
v_beginning_service_date stage_bill.beginning_service_date%TYPE;
v_bill_id stage_bill.bill_id%TYPE;
v_bill_method stage_bill.bill_method%TYPE;
v_bill_number stage_bill.bill_number%TYPE;
v_bill_received_date stage_bill.bill_received_date%TYPE;
v_bill_status stage_bill.bill_status%TYPE;
v_bill_type stage_bill.bill_type%TYPE;
v_change_oltp_by stage_bill.change_oltp_by%TYPE;
v_change_oltp_date stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code stage_bill.client_datafeed_code%TYPE;
v_client_id stage_bill.client_id%TYPE;
v_created_date stage_bill.created_date%TYPE;
v_date_of_incident stage_bill.date_of_incident%TYPE;
v_date_paid stage_bill.date_paid%TYPE;
v_deleted_oltp_by stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill stage_bill.duplicate_bill%TYPE;
v_ending_service_date stage_bill.ending_service_date%TYPE;
v_event_case_id stage_bill.event_case_id%TYPE;
v_event_id stage_bill.event_id%TYPE;
v_from_oltp_by stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status stage_bill.oltp_bill_status%TYPE;
v_review_status stage_bill.review_status%TYPE;
v_schema_name varchar(50);
v_Load_date date;
v_Load_user varchar(50);
v_Row_Effective_Date date;
v_Row_End_Date date;
Begin
if p_data_load_date is null then
 select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
 select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
 raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
 LOOP -- cursor c_get_data loop begin
 FETCH c_get_data
 INTO
 v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
 v_Load_date,
 v_Load_user,
 V_Row_Effective_Date,
 v_Row_End_Date;
 EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
 v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
 END LOOP;
 CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date DATE;
v_end_date DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
 NVL (p_data_load_date, SYSDATE) - 1
INTO v_start_date,
 v_end_date
FROM DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING (SELECT *
 FROM stage_bill
 WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
 INSERT (batch_id,
 beginning_service_date,
 bill_id,
 bill_method,
 bill_number,
 bill_received_date,
 bill_status,
 bill_type,
 change_oltp_by,
 change_oltp_date,
 client_datafeed_code,
 client_id,
 created_date,
 date_of_incident,
 date_paid,
 deleted_oltp_by,
 deleted_oltp_date,
 duplicate_bill,
 ending_service_date,
 event_case_id,
 event_id,
 from_oltp_by,
 oltp_bill_status,
 review_status,
 schema_name,
 load_date,
 load_user,
 row_effective_date,
 row_end_date
 VALUES (a.batch_id,
 a.beginning_service_date,
 a.bill_id,
 a.bill_method,
 a.bill_number,
 a.bill_received_date,
 a.bill_status,
 a.bill_type,
 a.change_oltp_by,
 a.change_oltp_date,
 a.client_datafeed_code,
 a.client_id,
 a.created_date,
 a.date_of_incident,
 a.date_paid,
 a.deleted_oltp_by,
 a.deleted_oltp_date,
 a.duplicate_bill,
 a.ending_service_date,
 a.event_case_id,
 a.event_id,
 a.from_oltp_by,
 a.oltp_bill_status,
 a.review_status,
 'HRI',
 SYSDATE,
 'ETLPROCESS001',
 v_start_date,
 NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

Error while retriving the data from the database

morning we shutdown and start up the server.after that when i am retreving the data from the database it is giving the following error.
ora-04030: out of process memory when trying to allocate 64512 bytes(sort subheap,sort key)
pga_aggregate_target details are as follows
value=2147483648
display value=2g
is default=false
is sesmodifiable=false
hash=2184567208

Please look at the following link :
how solve ORA-04030: out of process memory when trying to allocate
Cheers!

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

Hi,
I'm doing a internship in a production line.
My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
I would like to know who can give me an idea of how I could plot as much data and analysis.
Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
How could I compare, analyze and graph for example:
Five columns of production (input) with five (5) columns tested (data output).
After graphing.
Someone can give me a technique to analyze data? ie I compare column by column?
or some other technique? as a conglomerate could analyze data?
o give you an idea of the contect, now I perform an internship in a manufacturing turbines.
My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't take all the data from the source table.
I appreciate your advice
Thanks

You can declare as PT source whole Columns [$A:$E], without rows number.
Then You'll have all actually data.
Oskar Shon, Office System MVP - www.VBATools.pl
if Helpful; Answer when a problem solved

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

I am trying to delete the data from the info cube.

Similar Messages

Maybe you are looking for