I am trying to do the iOS 7 update on my ipad2 and the software update feature isn't there, help?

I have an ipad2 and in order to update to iOS 7 I must be able to go to the software update under setting but the feature is not there. My iTunes is also not recognizing my iPad when I connect it so I am unable to go that route either.

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.0.x
iPhone 4S                                    iOS 7.0.x
iPhone 5                                      iOS 7.0.x
iPhone 5c                                     iOS 7.0.x
iPhone 5s                                     iOS 7.0.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.0.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.0.x
iPad 3                                          iOS 7.0.x
iPad 4                                          iOS 7.0.x
iPad Mini                                      iOS 7.0.x
iPad Air                                        iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Similar Messages

HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

My iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

my iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device

I am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to ope

i am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to open the 'compact disc' preset from a trial version?

Are you sure, Eugene? I have this option:

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

Trying to use the new file features in Flash 10

Hi there, I'm now trying to use the new file features in Flash 10 but I'm getting this error when I try something like
fileRef.load();
ReferenceError: Error #1069: Property load not found on flash.net.FileReference and there is no default value.

It's tough to tell without seeing more of your code, but it might be that you're missing these lines of code at the top of your actions window:
import flash.net.FileFilter;
import flash.net.FileReference;

TS3694 errorcode 11 appears when I was trying to upgrade the software for my iPhone 3GS

While the upgrade to ios6 went on smoothly for my iPhone 4 and my iPads, while upgrading the iPhone 3GS, I came across this error message. Can some one help me how to get this sorted out ?Now the phone shows that I should connect it to my computer through USB although it remains connected and the error message comes only after the phone is connected and it tries to extract the software and update.
regards
Rao

How EXACTLY was it "unlocked"?
ONLY the carrier it is locked to can authorize unlocking it. Anything else is a hack.
If it was hacked/jailbroken to unlock it, you can't get help here per the terms of service. It is most likely now bricked.

Trying to restore the software locks up the iphone and renders it unusable

Trying to restore the software locks up the iphone and renders it unusable

Thanks for your reply.
When connected to the PC the screen on the phone showed the apple logo and stayed frozen with that image. The only way to get rid of the image was to hold both the power and home buttons. The message on the iTunes app said: iTunes is restoring the software on this iPhone. I left it like that overnight, but there was no change in the morning. Took it to the Telstra Shop in Melbourne, and they tested and said it was 'broken'. They gave me a new phone, but I had to recover all my contacts, agenda, etc from backup on the PC.

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
I need to install this so that i can transfer my contacts and calendar to my laptop

Hi and Welcome to the Community!
Sorry to be dense, but what happens when you do exactly as the message instructs?
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Iv been trying to sync new apps I downloaded on my ipad2 and it isnt syncing. when I connect my ipad to itunes on my PC and click on the APPS tab I can see the apps on the PC but they are greyed out

Iv been trying to sync new apps I downloaded on my ipad2 and it isnt syncing. when I connect my ipad to itunes on my PC and click on the APPS tab I can see the apps on the PC but they are greyed out

Do you have restrictions enabled on your iPad? Go to Settings>General>Restrictions and see if you have it turned on. If so - see if you have installing apps turned off. If you do, turn restrictions off on your iPad and that may do it for you.

I try to play a video through itunes but everytime it tries it causes the software to crash with windows 7.

Has anyone had this problem? I've tried to play a video through itunes but everytime it tries it causes the software to crash with windows 7. I have the newest updates.

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

HT4623 What if the "software update" button isn't there?

Does anyone know what to do if the "Software Update" button isn't there? I probably sound really lame, but I want to update to the iOS 5.0 for the iPad 1.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best.

I am trying to do the iOS 7 update on my ipad2 and the software update feature isn't there, help?

Similar Messages

Maybe you are looking for