I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???
I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...
Try this article (disable firewall)
http://support.apple.com/kb/TS2799
Similar Messages
-
I installed the latest version of flash player and it said installed successfully and i can use it just fine, but when I checked system requirements it didnt seem to match. it needed 2.33 ghz and I have 2.13ghz. can this cause problems to my computer? i have an intel i3 proccessor, windows 7, internet explorer.
Since all Intel i3 processors have at least 2 cores, your specs are well above the requirements; see http://ark.intel.com/products/family/75025#@All
I have some computers with far slower processors, and Flash Player 14 works perfectly well on them too. -
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a normal display even after shutting it off and restarting. Has anyone seen this and how did you resolve?
Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
Thank you,
Deb -
what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?
Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
I signed up for iCloud and downloaded everything for it. According to my iTunes account, everything should be swell, but when I try to sign into the Cloud, it tells me my Apple ID is valid but it's not an iCloud account. What do I do??IC
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB -
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
The error
Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
Ever since I downloaded the new iOS 7 my screen will not turn up and down and it rotates on its own side to side.it will not face the way I want it to go. How do I fix it?
I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!
-
Using airplay, with Iphone5 latest os, appletv3, I can play videos from youtube and internet just fine, but when I try to play videos bought from Itunes in my "videos" file, it only plays sound, no video. Please advise,,,
I am also having this issue. Hear but not see. I am using the iTunes video app on my iPad to play a show I bought on iTunes. A little pop up box comes up on the lower left of my tv showing the show , I can hear it but not see it. Rebooted Apple TV and iPad. No help.
-
My cover albums o iTunes are just fine But when i sinc my iPhone the covers get All wrong and mixed up. What can i do?
Perhaps you should ask over in the iPad community, you may get better answers there.
It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
psoon, here's a link to the iPad community:
Using iPad -
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?
cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions... -
Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
When I try and log into iclouds on my iphone it comes up with the max free accounts have been used on this device. How do I reset this
See this previous discussion.
icloud: The maximum number of free...: Apple Support Communities
Maybe you are looking for
-
My iPad 2 will not download to my mac computer
My iPad 2 operating system 8.1.2 will no longer download to my mac computer
-
IP Address would not open in Browser!!!!
I have an applet-servlet communication. I have setup everything... When i open my applet in browser using http://localhost/scanapp It works fine... i get the applet on the screen and then i am opening another frame from that applet's button actionper
-
Hello, I would like to register my skype Finland number for disclosure. That if I am going to call my customer then he sees my finland number, which is actually bought from skype and I am calling from estonia trough skype. When I try to confirm my nu
-
Problem with lookup xref not happening Properly
Hi All, we are facing an issue in lookup xref. Sometimes the lookup xref happens correctly and sometimes we get empty value from lookup xref even if the xref table has data properly populated. Check the below 2 cases. CASE-A: This mainly happens in t
-
Elements 10 Scanner Plugin is missing
I just upgraded from Elements 8 to 10. After installing Elements 10 my scanner doesn't show up in the Import screen in the Edit mode. It did in Elements 8 and prior Elements. I have Windows7, and an HP C309a scanner. The scanner works with the HP