I am trying to edit footage in PE12 from 2 different cameras and the output looks terrible
I am trying to edit footage in PE12 from 2 different cameras. One is a canon HD video camera taking AVCHD at 1440x1080 at 29fps. I am also using a canon 70D DSLR taking a MOV at 1920x 1080 at 29FPS
I want to make a 2 camera angle video. When i import both videos into PE12 and edit them together (i am dropping in footage and editing them back to back on video/audio 1) and start rendering, the output video is horrible. there are no straight lines and its blurry. the source video looks great...I am wondering if the difference in size of the 2 videos are messing up the project. is there anything i could do to make the final video look better?
I am very new at using this program and any information would be helpful...
thanks in advance,
jason
jason
Both 1440 x 1080 HD anamorphic 16:9 (pixel aspect ratio = 1.33) and 1920 x 1080 16:9 (pixel aspect ratio = 1.0) have the same
display, that is, 1920 x 1080. Whether you use a project preset for either, the space established by the project preset in the Edit area
monitor is 1920 x 1080 for editing. So, we achieve the goal of a 1920 x 1080 Edit area monitor space in selecting the project preset cited
above, that is
NTSC
DSLR
1080p
DSLR 1080p30
On the export side of things, it has long been suggested that 1440 x 1080 HD anamorphic content be exported with preset for 1920 x 1080 16:9
instead of 1440 x 1080 HD anamorphic 16:9 since both give the same display (1920 x 1080) and the choice 1920 x 1080 16:9 avoids the use of
a format that depends on a 16:9 flag to stretch the 1440 x 1080 for display after encoding. The latter has implications regarding issue of the player and recognition
of the 16:9 flag.
So, we should be OK on the import and export choices.
What about what happens between import and export. You wrote
I tried this solution and it seemed like it helped at first but when the final project was done, it looked bad again.
How did the final product look bad....was it the 1440 x 1080 HD anamorphic 16:8, the 1920 x 1080 16:9, or both that presented poorly in the export
which I am assuming was Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p30?
Depending on your further details, I have some suggestions for the Timeline content prior to export to file.
Please review and consider.
Thanks.
ATR
Similar Messages
-
In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?
Thank you for your attempt to help me. I appreciate that.
I think I figured out how to fix it-
I found that if I only delete a small amount at the beginning and at the end of the section that I want to remove - and then highlight that section - Then (and only then) does the "Delete and Move" function work to remove the unwanted section and automatically close the gap between the surrounding sections. I was trying to select a whole section and could only delete it - and then manually move it.
Problem solved. -
When im trying to edit a screen shot, my ipod crashes and turns back on. help!
so i was trying to edit a screen shot from instagram, and my ipod decides to randomly shut off and turn back on. it happens on about every 5th photo and is extremly annoying. help!
That is a bug in iOS 5.1.1, Restoring the iPod might prevent those crashes
-
Trying to edit my payment info. I keep getting the message that my number is not valid for the type of card I have selected. I have a VISA card. I have typed in the number 4 times, but same message pops up.
Thoughts?You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541 -
Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!
http://support.apple.com/kb/HT1296
-
I have been transfeing my DVD footage to I movie using handbreak and the spinning wheel of death has arrived and locked up I movie as I tried to import footage. The message says, "Optimizing movies, processing event DVD" but I can't get out of it.
Yes I held them down till the apple logo appears, then spinning wheel and repeated boot up process. I only knew it was going round in circles because the charging sound kept repeating every so many seconds.
I am downloading iOS.5.0.1 now to do a complete factory restore. I hope this works. I have been looking online for hours for fixes and I have very little batter on it as its been spinning for hours now.
Why do things like this happen? I am sat there watching tv and one minute the settings folder is there then its not! How does that happen? It just disappear? I hadn't moved it to another folder or deleted it, it just.... went! -
I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
RJ@Try to connect on Live chat one more time.
Still not connected , better to contact Adobe Phone Support
Click on Phone option and check once :
Contact Customer Care -
i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
-
my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?
You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB -
We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.
Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1) -
Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks
Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.
-
I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this
What's the model number of your Lexmark printer?
-
I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got. -
i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015.
Maybe you are looking for
-
Problem with image returned from getGeneratedMapImage method
I'm a newbie as far as map viewer and Java 2D goes.... My problem is the java.awt.Image returned from the getGeneratedMapImage method of the MapViewer API. The image format is set to FORMAT_RAW_COMPRESSED. The image returned is of poor quality with c
-
Hello Gurus, I hope you can help me with a problem. We use BI7 and at the moment we have 3 authorisation relevent objects Sales Office, Cost Centre and Sold To. We load this data via spreadsheets for each user, some will have a * and some will
-
Aspell-0.60 Binary and Aspell-0.50 Dict Compatibility
I recently updated aspell-de, aspell-fr, aspell-el dictionaries, all of which are in 0.50 edition. I didn't update the aspell binary to 0.60 edition as I thought there would be a conflict. Now the relation between the binary and the dictionaries is b
-
Event structure does not capture mouse click event on toolbar activeX control
Hi We have a toolbar activeX control on FP. It works perfectly on my computer, but on my coworkers deskyop, somehow the event structure doesn't capture mouse click event. Any idea? Thanks a lot for any help. Anne
-
Interactive pdf - Buttons within multi-state objects
Hi, I seem to have a problem. I dont know if it is even possible, but I made a button that goes to a status of 2 multi-state objects. Within one of those multi-state objects is a button that closes that multi-state object. So now I am wondering if it