I am trying to edit my website using the copy and paste function and am getting an error message that says my browser will not allow this function.. what do I do? thanks!
I am trying to do a simple copy and paste function while editing my website and I am getting an error message that says that my browser will not allow this function.. how can I override this?
thanks
Doug Snyder
You need to set Copy'n'Paste security policies for that domain in Firefox.
AllowClipboard Helper will help you do that. <br />
https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/
Similar Messages
-
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
I keep getting an error message that says "The administrator has set policies to prevent this installation" when I try to install iTunes. I have tried everything on the website. When i try to remove the components of iTunes I get the same message. How can I download iTunes?
Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you? -
When I tried to download the new version of firefox I get an error message that says "your computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment. When I try to uninstall in the control panel, the same message pops up.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1
Is your AirPort Express an older 802.11g model? If so, you will need to install v5.6 if you are running OS X Lion or 5.6.1 if running OS X Leopard or Snow Leopard. Unfortunately, the iOS version of the AirPort Utility cannot administer these older base stations.
-
I am trying to activate a first gen iPad with WiFi and 3G. When I go to Settings, Cellular Data, and View Account to activate the iPad, I get an error message that says, "SIM is Invalid. Pleae use a different SIM."
There is a SIM PIN option, and when I click that it asks for the PIN. I don't have a PW for the SIM (the iPad was a slightly used gift, and none of the paperwork came with the iPad).
Any ideas on how to activate the iPAD?
Thanks!Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.
-
When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you
Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support. -
Trying to uninstall itunes 11.0.4 in order to update to the most recent itunes. I get an error message that say..."This installation package could not be opened. Contact the application vender to verify that this is a valid windows installer package.
Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?
-
Hello all, I thought I would never be here, but I am. After updating iTunes and Memory Clean in App Store (nothing unusual) my MAC stopped booting properly. MBP / early 2011 / Mountain Lion It shows the Apple logo flashing twice the prohibiting sign
-
i have 20 Text fileds in my form and this may vary when the database data is changed so i want to use index property to that. how can i achive in the staruts i have declared in struts-config.xml as my property <form-property name="captionId" type="ja
-
Tp executes 10 second sleep function for every transport step
I am currently working on a problem related to performance of transports. In all of the environments i work with (about 50 in total), be it DEV,ACC,QAS,SBX or PRD, i have noticed considerable delays when tp is performing an import. This delay is occu
-
Do co-authors need to have an adobe cc account to access the form?
I have an Adobe CC account. I created a survey form from a template, and added 3 co-authors. Does each one need to have a CC subscription too? Do my recipients need to LOG IN to fill out this form once I have distributed it? Are the recipients of the