I am trying to extend my WiFi network from my TC.

I have a Time Cap connected to my modem. I then have an Extreme which I want to extend the network. I then have an Express that I want to extend as well. Here has been my problem. I set up my TC to Join the network. Then When I try to set either of the other 2 extenders to "Extend Wireless Network" I cannot do it. The yellow light comes on in the Airport Utility and wants me to edit the Extreme or Exp. to "Join a Wireless Network". Can someone please help me as this has been making me pretty crazy for quite somw time. I have been using the WiFi, but once I am about 50 ft. from my modem I almost completely lose my sigmal.
Many thanks,
Bill

Bottom line......the Time Capsule must be configured to "Create a wireless network".
That means that it must connect to your modem/router using a permanent wired Ethernet connection.
Once the Time Capsule is configured to "create a wireless network", then any recent version of the AirPort Extreme or AirPort Express can be set up to "extend" the wireless network and provide additional coverage.

Similar Messages

I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network.

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

Airport utility no longer recognizes my Airport Extreme Base Station, which had been set up to extend a wifi network

Hi. In November I set up my airport extreme base station (5th generation I believe) to wirelessly extend the wifi network we use at home to see if it would increase download speeds. Before doing that, I did a factory reset of my airport extreme, and the owner of the airport extreme to which the ethernet cable is attached made changes to his network to allow it to be extended. I folllowed all the directions from the apple support pages, and finally got it to work. I could even access a portable hard drive which I attached to the airport extreme base station being used as the extension. Then a week or so ago I noticed that my laptop would no longer connect to my base station. I did not have time to look into it until this week. Airport utility, either on my Mac or iphone no longer recognizes my base station. My mac is running OS X 10.10.1 and my iPhone is running iOS 8.1.2 I have tried both hard, soft and factory resets of my base station to no avail. The only thing that has changed after doing that, is that when I do a soft reset of my base station, a neighbors airport express appears when it never did before. I can't actually connect to it, but it does try. Then after approximately 5 minutes, it disappears from my list.
Today I went and pulled out my OLD AIRPORT EXTREME base station... you know, the one that looks like a space ship and is running wifi 802.1 b/c? airport utility DOES locate and display that, but airport utility returns a message stating that it cannot be set up by this software. I am attaching an image of that.
Thank you,
John
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?

I think the initial problem is that your iPhone was connected to an open network that wasn't yours.
Go to Settings > WiFi and "Forget" the network created by that AirPort Extreme, it's older than dirt. Forget your neighbor's network also.
Perform the equivalent actions with your Mac: System Preferences > Network > Wi-Fi > Advanced... Delete every network that appears, including your own.
Then, connect to your own network on all your devices, after which you ought to be able to use any of them and configure your Extreme without any difficulty. You may need to start over with a "hard reset" on both the main AirPort Extreme and the one extending its network.
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?
Not exactly, but using iCloud Keychain will populate all your devices with the names of preferred networks that any of them connect to, no matter where they are. I don't know why Apple considers that a beneficial feature.

When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best.

I've tried everything and still am unable to join my own wifi network from my iPhone 4s

I have an AirPort Extreme running the latest software. I've tried everything and still am unable to join my own wifi network from my iPhone 4s, iPhone 3Gs, iPhone 3G, my girlfriend's iPhone 4. The only devices that will connect to the network are our MacBook Pros and iPads, (1 and 2). I have reset the airport to default settings, I've restored my iPhone, I've even disabled the password. I am still unable to join my open airport extreme wifi network. PLEASE HELP!

Saying you tried everything isn't helpful. Perhaps describing in detail what you've done would allow people to better assist you.
If you're ever experiencing strange problems connecting to any wifi point you can always try resetting your network settings on your iPhone itself. This solves the majority of wifi problems.
To do this go to Settings > General > Reset > Reset Network Settings. This will clear all of your saved wifi hotspots and passwords, and hopefully solve your issue.
Please try this and respond with your results.

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage.

HT5704 I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update

I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update?

Please download iTunes from Apple.com and then sync your ipad.After which your ipad will appear on the right hand side upper corner of iTunes.Select your ipad and click check for update,once update has been found click update and follow the steps after that.

Trouble extending my WiFi network with older Airport Express

Hi,
As the question states, I have an older Airport Express which I have dug out to try and extend my WiFi network in a new house.
I am on Virgin Media (fibre optic) in the UK and get a good WiFi service but one room in the house (which I have just turned into a cinema/media suite) has no reception.
I have successfully managed to 'create a new network' via the Airport Express and the signal strength is 100% but for some reason if I try to reconfigure the device to extend the existing network I get no improvement at all from the (zero) signal I was receiving before.
Am I doing something wrong? Or is there an additional step I am missing?
I could live with having a secondary network but what I would really like to achieve is Home Sharing from my main computer, so that I can access my photos, movies and music etc. from iTunes on the big screen. If the computer exists on another network my iPad, iPhone and AppleTV can't see/use the media from that room.
Many thanks in advance,
Colin

Are these the steps you used?
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Configuring the primary Wi-Fi base station
Power on all 802.11n Wi-Fi base stations and allow them time to appear in the AirPort Menu Extra.
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the primary Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Create a wireless network” from the Wireless Mode menu.
Select the “Allow this network to be extended” checkbox.
Enter a Wireless Network Name.
Optional: By default, Wireless Security is set to None so that no password will be required to join the network. We recommend you click on the Wireless Security menu, select WPA2 Personal, and create a password between 8 and 63 characters long.
From the Radio Channel Selection menu, select Automatic.
Click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.
You are now ready to add extended Wi-Fi base stations to your network.
Configuring an extended Wi-Fi base station
Place any extended Wi-Fi base stations within range of the primary Wi-Fi base station
Ensure that all 802.11n Wi-Fi base stations are powered on and allow them time to appear in the AirPort Menu Extra
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the Extended Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Extend a wireless network” from the Wireless Mode menu.
Choose the network you want to extend from the Network Name menu.
Enter the network and device password if necessary, then click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.

HT4259 i connected two airport extremes by extending a wifi network. wifi seems weak...help

i connected two airport extremes by extending a wifi network. all my lights are green, and airport utility confirms connections are excellent. but the extended base station hasn't improved my wifi range in the area i set it up in.

If you have a Mac laptop handy, run the test that I have outlined below to find out if the remote AirPort Extreme is really extending the signal at all.
Here, I assume that both of your AirPort Extremes are the newer "square" versions....not the older "round" version.
Locate your Mac laptop close to the "main" AirPort Extreme
Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen
Look for the BSSID and jot down the last few characters
The BSSID is the AirPort ID of the AirPort Extreme
Now, move the laptop close the "remote" AirPort Extreme and perform the same test
If you see the same BSSID as the "main" AirPort Extreme, your Mac is picking up from the main AirPort...and the remote AirPort is not configured correctly to extend.
If you see a different BSSID near the remote AirPort, that indicates that the Mac is picking up a signal from the remote AirPort....which is exending the signal correctly.

Extend existing wifi network?

Can the airport express extend an existing wifi network?
I am looking for a portable wifi router that I can use while traveling. I would like to be able to provide acces for my IPad to wired networks and extend a wireless network in the event of a poor hotel signal.
I have found many travel routers with these capabilities but most cannot be configured using only an iPad!
Any suggestions appreciated.
Willie

Can the airport express extend an existing wifi network?
The AirPort Express can only "extend" a WiFi network that is produced by another Apple router....an AirPort Extreme, Time Capsule or another AirPort Express.
So, the chances of an AirPort Express extending any given network while you are traveling would be just about zero.
If the hotel has an Ethernet port, it is possible to connect the Express that way and have it produce your own private network in the room.

How do I extend a wireless network from SA520W with AP541N ?

Hi,
I'm setting up a wireless network, based on a AP541N, and want to add one (or more) Access points to extend the wifi network.
For now, I have set-up both devices with the same SSID and keyphrase, but is this the correct way of setting up a larger Wifi network ? Note: the AP is connected via a POE connection, so it is not a wireless bridge I'm looking for.
Should I use the "cluster" features ? Not sure how it works...
All tips welcome, a step-by-step guide would obviously beat everything!
Thanks
Stef

Try temporarily connecting via Ethernet to the AirPort Express (AX). After you configure the AX you can disconnect the Ethernet connection.

HT4437 I bought a brand new iPad 3 and an Apple TV, both connected to the same wpa protected wifi network from home. It worked for a day, but when I woke up, the Apple TV couldn't be found anymore by neither iPad, MacBook or iPhone. Any clue? Thanks!

I bought a brand new iPad 3 and an Apple TV, both connected to the same wpa protected wifi network from home. It worked for a day, but when I woke up, the Apple TV couldn't be found anymore by either iPad, MacBook or iPhone. Anybody a solution for this?

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I am trying to extend my WiFi network from my TC.

Similar Messages

Maybe you are looking for