I am trying to find a manual in Spanish for a g4 imac

I am trying to fin a manual in Spanish for a g4 imac. The apple websites list manuals for newer models but not for a g4 (bought in 2002)

Could possibly the following manual be of some use?
http://manuals.info.apple.com/MANUALS/0/MA558/es_ES/E1000.G4-ES.pdf
Other documents can be found via the link below.
http://support.apple.com/es_ES/manuals/#macdesktops
(click several times on "Cargar más resultados" for older results)
Jan
EDIT: Sorry, just noticed that you wrote iMac. This is the area for "normal" Power Macintosh computers; G4 iMac would be handled at the iMac (PPC) community. Some manuals for older/newer machines, and even other models, can often be used to a certain extent.

Similar Messages

I am trying to find a GPS Tracker/Watch for my kids, Apple compatible, any idea's?

Hello, I am trying to find a GPS Tracker/Watch for my kids, Apple Iphone 5s compatible. Any suggestions?

Hi, Please use the following link: http://support.hp.com/us-en/product/HP-Pavilion-10-x2-PC/7439381/model/7499063/manuals/ Regards.

I am trying to find a program called XMP for putting metadata in pictures. Any ideas?

I am trying to find a program called XMP for putting metadata in pictures. Any ideas?

You can either enter metadata in bridge in the bridge metadata panel, or in Photoshop by selecting the file>File Info...

I am trying to find the network security key for my airport extreme router

I am trying to find the network security key for my airport extreme so I can hook up my pc lap top.

I am afraid that the "key" will be of no use to you (it is 64 characters long).....but I hope I am wrong.
Since you indicate that you are using an iPad, I assume that you are also using AirPort Utility on the iPad.
On the iPad home screen, tap AirPort Utility
Tap on the AirPort Extreme
Tap on Edit
Tap on Advanced
Tap on Show Passwords
Tap on Main Network and "key" will be revealed

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

I am trying to find a business plan template for use in pages and numbers

Hi,
I am trying to find a template for a business plan for a start up company to allow me to submit and idea and costings to get financial investment.
There are lots available on the net but they are mostly written for WORD.

Glad someone does Peggy.
The notification system seems to be quite sporadic.
I go to get links for FAQs and occassionally spot the odd irrelevant comment and spam, but really unless it is totally off the wall I leave them be. At least for a month or two, then clean them off just so it doesn't bury the valuable stuff.
Been thinking about reconstructing the entire thing using WordPress so I can get better control over the layout and sort them imto more logical groups. I have trouble locating stuff I know is there and I pity the newcomer who doesn't even know it exists.
Peter

Trying to find Windows 7 driver / software for OfficeJet 4500 (CB867A) connected using Wired Network

Hello,
I am trying to use my Son-in-Law's HP OfficeJet 4500 CB867A (G510G). I am able to SUCCESSFULLY:
Communicate using a browser with the printer (e.g. http:\\192.168.10.139)
Print from my Samsung Galaxy S3 32GB phone using the HP Android software. If finds the printer just find and prints just fine.
Thus the printer looks to be connected successfully to the network. (Wouldn't you agree?)
The problem is installing the printer on our various Windows 7 Ultimate x64 systems. Right now I've only been trying my workstation (Dell T7500). When I follow the directions what comes down is the basic driver and software. The basic driver and software ONLY supports USB. I cam to this conclusion throgh two facts:
The documentation on the download page, when you look at the details says only supports USB. This is true for G510A and G510G. I didn't try G501N, as it is wireless. Maybe it is really Wire and Wireles . . .
I can't get the setup Wizard to try to find the printer through anything but USB.
How do I get Windows 7 to recognize this WIRED (e.g. Cat7 cable) HP All-in-One printer?
Thank you?

Hello,
Thank you for the very quick reply. I will try the download link you gave me.
As for the documentation, I looked again and what I'm seeing says Windows 7 and does say for "USB only." I page and what I'm reading are:
URL: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-4500-All-in-One-Printer-Series---G510/3...
The text I'm reading says:
Details
The Full Feature Software and driver solution is the complete software solution intended for users who want more than just a basic drivers.
IMPORTANT NOTES
For Windows XP SP 1 Starter Edition and Windows Vista Starter Edition
Only printer drivers and the Toolbox are available
Is supported for USB only
Hardware Setup Wizard is not available
After downloading and installing this software, I got two icons on the desktop. They both (in their own ways) insisted on using USB to connect to the printer. One was a HP Solution Center and the other a HP Printer Setup icon/program.
Again I'll look at your download. Hopefully, it will be what a wired printer needs to print and scan! :-)

Trying to find termplates with drop zones for FCP 6 Help please.

I'm on FCS 2 (FCP6) and I'm looking for some templates that I can use to create a short video montage. I wold like to have images moving slowly around the screen with 'firework' effects going off around them. I've seen this done with a template but that was done on FCP 7. This would take the rest of my life to do manually so the question is are the kinds of templates WITH DROP ZONES available for use in FCP6? I've searched around but can only find templates for fonts, transitions and so on. Any help much appreciated.

I've just realised that the template I was looking for in FC is actually available in Motion and I'd failed to install it, so I'm sorted. If there is a source of free templates I'd be thrilled to find them.

Trying to find if can upgrade RAM on early 2009 iMac 2.66. Has 4GB. Says has 2 slots each accepts 1067 MHz DDR3 module

I have an early 2009 24-inch iMac (2.66 intel core 2 duo) with 4GB memory and am trying to establish if I can upgrade the memory, hopefully to improve performance and prevent regular/occasional slowdown/sticking. Spec tells me I have 2 memory slots, each of which accepts a 1067MHz DDR3 memory module. It says all are currently in use and shows 2GB in each. So, question is can I upgrade or is this the max it can take? I'd like to upgrade, say, to 8GB, 4GB in each slot, if they have the capacity for that, which isn't clear.
Also wondering if this will improve performance - i.e. prevent occasional but sometimes regular sticking/slowing of performance, spinning wheel, etc. Activity monitor often shows just single or three-figure MB 'free' - mostly as a result of having multiple web pages open (have 8 saved tabs regularly open). That said, all my problems started some time ago when I 'upgraded' to Lion. But general view seems to be that memory is best bet for such problems.
If I can upgrade, am I right to understand that Mac memory is way overpriced and that it's OK/safe to use third-party memory and that a total non-expert can install that?
Any help appreciated.
geoff

Each slot can accommodate up to a 4GB module; upgrading both slots will max out your RAM at 8GB.
How much performance boost you see depends on many variables, one of which being your version of the Mac OS, which we don't know at this time. My experience is that, for the average user (word processing, web browsing, e-mail), 4GB RAM is fine up to Mac OSX 10.8 Mountain Lion. Please tell us what OS you have and how you use the computer (task-wise) and we can better suggest if an upgrade will help.
Install RAM in an iMac is an easy, 10-minute and at-home job. Video instructions here:
http://eshop.macsales.com/installvideos/imac_mid_2007_mem/
RAM is expensive if you get it from Apple. Fortunately for you, they only sell extra RAM for the latest models. For over a decade I have bought RAM from one vendor online and never had an issue. I find their Mac RAM roughly equal in price to RAM for the "Dark Side" computers. I am supporting about 25 Macs between family and friends, so have some credibility as an advanced user.
If you give us a rough idea of where you are located, we can suggest reliable vendors of Mac- compatible RAM.

HT204088 i have charges on my bank account, trying to find out what they are for so I know which kids to collet from - we have 5 apple ids so not real

I have bank referance numbers but can not find anywhere online to type them in, I have tried 5 different apple customer service numbers and either get told to go to the website or get hung up on - ??? can anyone tell me where I can go or who to call to find out what these charges are for

You can view an account's purchase history via your computer's iTunes : log into an account on your computer's iTunes via the Store > View Account menu option, and you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
Or you can view the last 90 days purchases on an account, and optionally contact iTunes Support if there is a problem with one of them, via http://reportaproblem.apple.com
There isn't a site/place where you can type in order numbers.

Trying to find a compatible hard drive for a zen touch. Anyo

Hey guys.
I'm trying to save some dats from my hard dri've, and have managed to take the hard drive apart, so that I can take out the circular disc with the data on.
The dri've is a Hitachi travelstar with model code: HTC424040F9AT00, and it's a 40gb drive. Does it have to be this exact model in order for me to put the disc into a working version of this drive, to get the data off? Can it be any travelstar?
Either way, does anybody know where I could get one of these?
Any help would be much appreciated?

I think most computer guys would say you're SOL at this point, but as I said, continue and see what happens. When I was doing research on the old Dell 20 gig Jukebox I had here, you could install up to a 40 gig hard dri've into a 20 gig unit and the unit would recognize the additional storage, but the one Hitachi guy I talked to didn't know if the unit would recognize a 60 gig HD. So from that I gathered that you could put your disc into a 20 gig unit, and it should read it.
Do a search on 'computer clean room' though, and I think your info on that disc is already bad. HD manufacturers take great pains to create clean rooms so that disc don't get dust on them, but surprise us and prove them wrong..

Trying to find a new Graphics card for G4 Quicksilver Dual 1 ghtz

Hello All,
I am looking to upgrade my video card for gaming purposes. I have been doing research and thought I had found a card I could use. Then I researched more, and confused myself. There comes a point when one must ask
So I have the Geforce 4 MX right now and want to upgrade. At first I read that the ATI 3850 AGP would be a nice card to use, though I don't think it will work in my machine. I then came across the ATI 2600 XT. I also see that the 9800 pro is good. Then I hear about flashing....help?
So my questions are:
What is the best card that I can put in my trusty ole G4 Quicksilver?
A rough price range perhaps? Would I need to add a fan, or is the fan that comes on the graphics card sufficient?
Should I look solely at flashed cards, and if so would I flash it myself or buy one that is flashed already?
I am looking at spending no more than $200 on a card, is that a good amount for a card? It seems like it it isn't the top, but will do pretty good at buying a decent card.
I really appreciate these forums, and have read quite a bit here. But once I start researching I soon find myself reading about other interesting things (since there is so much great information here) and 2 hours later I remember why I came here in the first place.
Thanks in advance,
Etin
Specs:
G4 Quicksilver Dual 1ghtz
1.5 GB ram
AGP
Apple Cinema Display
(let me know if you need more information)

Ok, no answers huh?
Well, I purchased a ATI 9800 Pro Mac Edition.
*_A warning_*, if you have an Apple Cinema Display check the connection type. If it is an older display, you probably have a ADC connection. The newer models have a DVI connection. Make sure the video card has that type of connection on it or you will have to buy a ADC to DVI converter from Apple. This costs $99.00.
When purchasing a video card keep this in mind and add this to the price you will be paying to use the video card.
Thanks for the wonderful help.
Etin the almost PC user!

Trying to find the correct Oracle version for SCO Unix 5.06

Please I will appreciate you can help me indicating where can I download the correct Oracle version for SCO Unix 5.06. I have downloaded the Tru64 Compaq version but it is not working with SCO.
Best regards
Armando Delgado
00511 8105860
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg

This is pretty old. From the certify matrix, you can see the last available versions this platform supported were 9.0.1 and 8.1.7, just for the Intel SCO Open UNIX 8 with LKP. SCO 5.0 last time I used it was with an Oracle7.3 release. In case you don't have software it'll be hard to find, unless you address this to your Oracle Representative.
Are you absolutely required to run on this version? Otherwise, you could try new software and new oracle releases, unless you want to run unsupported.
~ Madrid.

I am trying to find where my invoices are for Creative Cloud

I subscribe to creative cloud and my credit card is being billed every month. I cannot for the life of me remember how to find where my invoices are listed.
can anyone help..
regards

This forum post http://forums.adobe.com/message/4498407#4498407%234498407 should answer your question.

Trying to find a class or method for showingStatus in application StatusBar

hey ever language has a class or method to show the status of the application in the status bar but i have not been able to find one in java uptill now i am still searching for some thing to help is there any one that can help me

Implementing a status bar is up to you, but it's not
hard. Use BorderLayout as the layout manager of your
main window, add JLabel statusJLabel to
BorderLayout.SOUTH, and call statusJLabel.setText with
each status message.can you be more specific about the call thingy
let say i have manu items like
File > open
Close
Save
Print
Exit
now when i bring my mouse on it or go up and down the list the status should show like open, close, save, print, exit.

I am trying to find a manual in Spanish for a g4 imac

Similar Messages

Maybe you are looking for