I am trying to find a performance meter widget that responds positively or negatively based on user selections in an interactive, decision-making learning game.

See the proposed image of what I'm looking for in the bottom left of this concept draft. Based on how the participant selects to answer, this meter would go up or down, recording their performance throughout the module. I know it's possible in ZebraZapps. I would think there would be a way in Captivate. Fingers crossed!

This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with  SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials

Similar Messages

  • I'm trying to find a word processing app that is comparable with Microsoft word, that supports drop down menu's for filling out forms. Any recommendations?

    I'm trying to find a word processing app that is comparable with Microsoft Word, but can use drop down menu's to fill in forms? Any suggestions

    Microsoft Word for Mac
    OpenOffice
    NeoOffice
    LibreOffice

  • Can't find my icon Dashboard widgets that are preinstalled

    can't find my icon Dashboard widgets that are preinstalled

    you don't see this in your Dock?  That's where all the widgets would be.  Click on the "+" in the bottom left hand corner when dashboard is open to add widgets.

  • Trying to set attribute value based on user selection of another attribute

    I am trying to set an attribute value based on the user's selection of another attribute using JSP EditCurrentRecord. When the user chooses the AreaId from the combo box I want to look up the value of the RgnID, preferrably without the user seeing this field at all. Below is my code which does not work. When I run it I get Error Message: null. Any suggestions are appreciated!!
    <jsp:useBean id="RowEditor" class="oracle.jbo.html.databeans.EditCurrentRecord" scope="request">
    <%
    RowEditor.initialize(pageContext, "MyProject2_package1_SRSecurityModule.UsrAreaWhView");
    RowEditor.setTargetUrl("UsrAreaWhView_SubmitInsertForm.jsp");
    RowEditor.createNewRow();
    RowEditor.setDisplayAttributes("OracleId, RgnId, RegionKey, AreaId");
    RowEditor.useEditField("OracleId");
    RowEditor.getFieldRenderer("OracleId").setPromptText("Oracle ID");
    RowEditor.useEditField("AreaId");
    RowEditor.useComboBox("AreaId","AreaWhView","Area","AreaKey");
    RowEditor.getFieldRenderer("AreaId").setPromptText("Area");
    RowEditor.useEditField("RgnId");
    RowEditor.getFieldRenderer("RgnId").setPromptText("Region");
    RowEditor.getRowSet().getViewObject().getCurrentRow().setAttribute("RgnId",RowEditor.getRowSet().getViewObject().getCurrentRow().getAttribute("RegionKey"));
    RowEditor.setReleaseApplicationResources(true);
    RowEditor.render();
    %>
    </jsp:useBean>

    ok, sorry everyone for making it confusing; this is what I am
    trying to acheieve;
    I would like the user to populate my database with thier
    username AND userID. I have a dropdown box with thier username
    dynamicly populated already, what I am trying to achieve, is a way
    of when the user selects thier username either another dropdown or
    a hidden field is automatically populated with the appropiate
    userID (to match thier username). Now I could just have two
    dropdowns and they select both, but i'd rather avoid the
    possibility of mismatches, and that is why I would like it to be
    automatic and based on thier username selection...
    Does that make sense....?

  • I'm trying to find a simple countdown widget.

      I had one, but I can't find it in Trash.  Any ideas where to find it or a replacement?

    Thanks for the response. The widget you reference looks useful, and I'll check it out.  The one I'm looking for, however, has six triangles to increase/decrease the hours, minutes and seconds.  It also has a "start/stop" button.  Once running, the widget counts down to 0 and then climes a bell.  It's very simple useful to be reminded to do a future task in say five minutes.
    It's possible the widget was bundled in OSX.

  • I am trying to find a photo shop program that allows cropping by hand so I can crop a head and put in another of my pictures

    i used to make greeting cards by cropping faces and putting them on funny pictures that i would download from the web.  i recently purchased a macpro and was disspointed to  learn that i cannot cut out a face by hand on iphoto.  Do you know of any ..other program that I can use with my macpro to accomplish this.  Thank you in advance for any help you can give to me.

    Go to Picture editor, edit pictures | Adobe Photoshop Elements 12 and click on this video tutorial:
    You can download a demo version of PSE 12 here: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe
    OT

  • Hi, I'm trying to write a code in Labview that will run a scara robot, Its gonna be 2 axis, one linked to a gam

    matic motor and the other to a mutshibishi motor, I already have the code for the gammatic motor, I need an other one for the mutshibishi one....guys, I come from a production management engineering backgound and I sack in programming, would anyone help methe idea behind is to see an accuracy between the data entered in term of positon, speed motion of the 2 axis of the scara robot and the data received

    Hi Mark,
    What do you mean by integrated trajectory planning functions?  Could you give an example of what you would use these functions for?  Our SoftMotion toolkit can do path planning and trajectory generation, is that what you are talking about?
    Thanks,
    Maclean G.
    Applications Engineering
    National Instruments

  • In UK - trying to find somebody to do the mod for me (Upgrade X1 carbon screen into my T430)

    I am based in the UK and have researched the T430 screen issue. I am trying to find somebody in the UK that will do the Mod for me - fitting an X1 Carbon Screen into my T430.
    Can anybody help me?
    Many Thanks

    Hi,
    Welcome to Lenovo Community Forums!
    First, you will void your warranty. If you have a warranty, this could be a very bad plan. Also, I’m not pretty sure how compatible the X1 carbon screen will be with the T430. I doubt an authorized Lenovo technician will not be ready to do such a replacement. You may have to find a third party technician.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How I can find all the entities bol that contains a field.

    Hello, I'm trying to find all the entities bol that contains the field account_group, in the model_browser but in Tx "GENIL_MODEL_BROWSER" I have to see all bol entities if contains this field.
    My question is:
    Is there a transaction or other method where I introduce the field and appear all the Bol entities that contains this field????
    Thanks in advance

    To delete network locations:
    System Preferences / Network
    On the locations drop down menu, select Edit Locations, choose the location you want to remove and click on the minus sign.

  • I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either.

    I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either. I am a newbie at this and don't know what I'm doing wrong or if I can even use an external drive for my photos and catalogs (I did enable smart previews so I do know how to do that part). Help!

    You can use an external drive with LR but I recommend only using it for
    image file storage while keeping your catalog on your internal HD for
    performance. If you moved files outside of LR (Finder or Explorer) you will
    have to clue LR in on where they are now. Use the left-hand folder panel in
    Library mode to navigate to the location on your external drive and use the
    find photo option get LR to reconnect them. If you moved the catalog and
    now LR can't find it you should get a window allowing you to select a new
    one where you can navigate to the new location and select it. You can also
    just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
    and start LR.

  • Performance meter in weblogic console

    All,
    Semi new to memory analysis on the server side (distributed garbage
    collection and all). I was rather used to doing client application memory
    leak analysis. Are there any good starter guides for memory analysis when
    doing load testing?
    I am currently working on a project where we do severe load testing against
    servlets that hit session level EJB and then entity EJB. We see the heap
    (Server->monitor->performace) sawtooth slowly up until the server throws out
    of memory exceptions and starts to fail. We have already fixed a few
    glaring problems with our code, but the sawtooth remains.
    What is the garbage collection routine under WebLogic? Does it run
    periodically? Does it run during high/low activity? Should it not be
    called before any OutOfMemory exception is throw?
    If you set the ejb's to keep too many ejb references in the cache, will the
    server sanity check this and bump some out of the cache when memory gets
    tight? Basically, I'm asking could I shoot myself in the foot in
    weblogic-ejb-jar.xml or will the server help me out?
    Finally, if you start mydomain as shipped and go to the performance graph it
    slowly sawtooths up at a very slow pace. If you let it run over night it
    eats up 10 megs or so. Why is this? It looks rather bad, but I can't
    assume this is as it looks on the surface.
    Sorry for all the questions, but maybe this will start a good thread.
    Andrew Spyker ([email protected])
    Software Engineer
    http://spyker.dyndns.org

    JVM heap usage will grow and shrink throughout the life of the server. Even an
    idle WebLogic server is allocating and freeing object instances. Therefore,
    when looking for a "leak", make sure that you account for the state of the JVM
    garbage collection and compare "apples" to "apples".
    I find that it is best to compare the heap usage after full garbage collections
    (GC[1]). Try enabling -verbose:gc and comparing each of the full GC results.
    Provided that your server is handling a constant and steady load (or is
    constantly idle), you should see little change in heap usage after each full
    GC. However, if your your server is idle you may need to force GC to run every
    hour or so. By default, you need to use nearly all of the allocated heap
    before full GC will kick in.
    -Charlie
    Andrew Spyker wrote:
    "Mike Reiche" <[email protected]> wrote in message
    news:[email protected]...
    The garbage collector is a function of the JVM, not of WebLogic. Look atthe JVM
    documentation for an explanation of garbage collection.Gotcha.
    Weblogic, without any application code runs fine. When you add YOURapplication
    code, then you might run into problems. Hence it is your code that ischewing
    up (and not releasing) the memory. JProbe is good at find this kind ofproblem.
    You can also narrow things down - for instance - hit only one servlet andsee
    if the memory grows. Or remove references to session beans, and hit theservlet.
    I should be more specific. I installed WLS SP2 on Redhat Linux 7.1 and ran
    startWeblogic.sh from the default mydomain. I didn't make any
    modifications. I ran the performance meter and the memory did grow over
    night significantly. This suprised me. Do I attribute this to Linux? Our
    production environment is definately Solaris, but I'd like to be able to
    diagnose memory leaks on Linux. I don't want this false positive in the
    tests. Am I missing something here?
    OutOfMemoryExceptions occur when the JVM attempts to allocate more memorythan
    is available - even after running garbage collection. The JVMoption -verbose:gc
    will also shed some light on GC.
    The Java Heap is not the only part of the JVM that requires memory. Inrare cases,
    much memory is consumed by classes and methods in memory, heap (not javaheap)
    used by native code.
    Mike ReicheThanks for the response ...
    "Cameron Purdy" <[email protected]> wrote:
    It is not easy. Optimizit and JProbe can help, as can a well-architected
    application with classes that support dumping debugging information (to
    evaluate object graphs) and serialization (to guage sizes).
    Typical leaks are in session objects, static fields, and database driver
    usage without proper closing of objects.
    Peace,
    Cameron Purdy
    Tangosol Inc.
    << Tangosol Server: How Weblogic applications are customized >>
    << Download now from http://www.tangosol.com/download.jsp >>
    "Andrew Spyker" <[email protected]> wrote in message
    news:[email protected]...
    All,
    Semi new to memory analysis on the server side (distributed garbage
    collection and all). I was rather used to doing client applicationmemory
    leak analysis. Are there any good starter guides for memory analysiswhen
    doing load testing?
    I am currently working on a project where we do severe load testingagainst
    servlets that hit session level EJB and then entity EJB. We see theheap
    (Server->monitor->performace) sawtooth slowly up until the server
    throws
    out
    of memory exceptions and starts to fail. We have already fixed a few
    glaring problems with our code, but the sawtooth remains.
    What is the garbage collection routine under WebLogic? Does it run
    periodically? Does it run during high/low activity? Should it notbe
    called before any OutOfMemory exception is throw?
    If you set the ejb's to keep too many ejb references in the cache,will
    the
    server sanity check this and bump some out of the cache when memorygets
    tight? Basically, I'm asking could I shoot myself in the foot in
    weblogic-ejb-jar.xml or will the server help me out?
    Finally, if you start mydomain as shipped and go to the performancegraph
    it
    slowly sawtooths up at a very slow pace. If you let it run over nightit
    eats up 10 megs or so. Why is this? It looks rather bad, but I can't
    assume this is as it looks on the surface.
    Sorry for all the questions, but maybe this will start a good thread.
    Andrew Spyker ([email protected])
    Software Engineer
    http://spyker.dyndns.org

  • HT5429 I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

    I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • I cannot uninstall or install itunes.  error is 'trying to use on a network resource that is unavailable'.  I cannot find a pth to any folders containning installation package itunes.msi.  Unable to download itunes since 2 updates ago and crashed com

    I cannot uninstall or install itunes.  error is 'trying to use on a network resource that is unavailable'.  I cannot find  path to any folders containing installation package itunes.msi.  Unable to download itunes since 2 updates ago and crashed computer.    Windows update as suggested in some posts does not assist either.
    Can anyone assist me?  Thank you so much

    Should the advice above not fix things for you...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Unable to find/read file META-INF/ra.xml

    When using the oc4j_admin_client to deploy an ear to a oas cluster I get this error, but only sometimes. I cannot find anything on the web that explains what might be causing this to occur. I'm guessing it might be with the configuration of OAS but even so I have no idea where to look. If anyone out there can give some advice it would help. Thanks,
    [Summary] There are total 1 instances in the operation.
    [Summary] Operation failed on applicationServerName/instanceName
    [Summary] Operation on cluster FAILED since 1 instanced failed!
    FINE: CoreRemoteMBeanServer.release call release on CoreRemoteMBeanServer: oracle.oc4j.admin.management.mejb.MEjb@5c1ae90c
    FINE: CoreRemoteMBeanServer.release Call remove on MBeanServer EJB
    FINE: CoreRemoteMBeanServer.release Call close on RMI Context: javax.naming.InitialContext@1629ce8c
    SEVERE: J2EEDeploymentManager.deploy Deploy error: Operation failed with error:
    Unable to find/read file META-INF/ra.xml in D:\oracle\u01\oas\10.1.3\j2ee\instanceName\connectors\AppName\AppName archive (IO Error: D:\oracle\u01\oas\10.1.3\j2ee\instanceName\connectors\AppName\AppName (The system cannot find the pat
    h specified))
    oracle.oc4j.admin.deploy.api.J2EEDeploymentException: Operation failed with error:

    Hi forum-hog,
    I think this is due to a known product defect. The patch is available and can be downloaded and installed.
    Please try the following:
    1) Download and apply patch 9073284
    2) Perform the deployment again
    Hope this helps.
    Thanks,
    Cris

  • Process Manager Vrs Performance Meter

    Does anyone know the differences between the Process Manager and the Performance Meter. I am running both at the same time on the same system and I am getting completely different values for CPU% usage. The Performance Meter always seems to be much higher than that of the Process Manager. 40% to 10%. I have the time sample set to the same amount of time for each, and I am completely stumped as to why there is such a differnce. I wich I knew what the Performance Meter was measurring, and why it is so much higher. Any ideas? Thanks

    Well I didn't post an exhaustive list of possibilities.  Here's the macupdate link for Renicer.  Look further down the page at the Similar Software section.  There are other possibilities there.  Maybe you find a free one you like.
    Note, you could always encpsulate the renice terminal command if you have the knowledge to do it that way.

Maybe you are looking for