I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.

Format is found in the Erase Tab:
The Disk Image is found on the Restore Tab:

Similar Messages

HELP!!!! I have spent hours trying to find out how to embed an image with a link or a Microsoft Word document with a hyperlink built within the document -- not as an attachment! Does ANYONE know the secret? Can it be done, or not! My PC clients do it.

HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!

Don't know if this applies to Lion, but read here:
http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/

2 weeks trying to find out how to use the media live encoder in multi stream. And I can not find an

2 weeks trying to find out how to use the media live encoder 3.2 in multi
stream. And I can not find any clear instructions guide. Please from
my soul, taught me clearly, how I can stream to 2 different site
using live media encoder. what I do with ftml values and the other
one , wich everyone site give me, where should I put them, in what
order ... everything I tried, I got an error. I realy please you,
please !!!! thanks in advance !!

[Moved to Flash Media Live Encoder forum.]

Trying to find out how to get the smallest value in a 2-D array

I figured out how to get the largest and smallest in a 1-D array, but I'm having trouble with the for loop for the 2-D array
I can't seem to figure out how I can get it to check every element in the 2-D array
Lets say I have this array
int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};and I want to find the smallest value, I think I can figure out what goes in the box of the for loop I just need help with how I can check every element..
Thanks all

Ok so here's what i've got so far and my brain is starting to hurt,
My output right now is "2".. i'm almost there :/ aren't I?
public class bladddhd
     public static void main( String [] args )
     int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};
          int length2 = aRay[0].length;
          int temp = 0;
          for(int i = 0; i < aRay.length; ++ i)
                    if(aRay[0] > temp)
                         temp = aRay[0][i];
                    for(int j = 0; j < length2; ++j)
                              if(aRay[1][j] < temp)
                                   temp = aRay[1][j];
               System.out.println(temp);

HT204409 Can someone please help me.....I am trying to find out how you get the pass word for joining a Wi-Fi when asked to join and then told to put in a password. How do you get that?

ok

Thank you roaminggnome. All that I don't know. I know nothing about all this stuff. I am on a pc here at home that has a cable hookup to Roadrunner internet. Some kind of modome with a buch of lights sit on top of my computer that hooks me up. So I don't guess I have wi-fi here. Ever since I got my iphone 4, I have been trying to use FaceTime here and it always tell me that I need a wi-fi connection I think. Also wanted to update to iso5 again it tells me the same. Every now and then a thing will pop up on my phone asking if I want to join a certain Wi-Fi that has the littlck on it and when I click join it tells me to put in the pass word to join. NO GO! Thanks again for your help. I do appreciate it. I guess I will have to find someone that lives around me that can explain this stuff to me and show me what is needed.

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

My iPhone 4S is not showing up in iTunes. I've never had this issue before, but I'm finding it a little frustrating trying to figure out how to rectify the situation. Any suggestions would be greatly appreciated.

My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.

Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Trying to find out how to edit artwork, keywords, titles, and descriptions

Trying to find out how to edit artwork, keywords, titles, and descriptions for my own video podcast that I have created for the iTunes store. My podcast shows on the first page in the itunes store (podcasts) for "forex" "forex training" and "forex education" under the name "fastpips", however I can't seem to find out how to change the title, for each podcast, the description, and keywords. I also want to add artwork to my podcast. I know how to do it under options for my own iTunes on my personal computer, but don't know how to edit it for others to see in the store itself. Thanks so much for any advice. By the way, I upload all my video podcasts to iTunes via ScreenCast.com I'm not sure if this will help, but here is the domain for the screencast files: http://www.screencast.com/users/ForexProFund/folders/FastPips.com%20Forex%20Trad ing%20and%20Forex%20Education

I have a similar question, I would like to edit the artwork for EACH episode in the podcast, as well as have one artwork for the entire podcast series. Any suggestions? This is a podcast that I've created -- I did the same thing for a TV Show where I was able to do custom artwork for each episode, but not one single artwork for the entire series. Does anyone have suggestions of how i should proceed?
Recap:
One image for entire Podcast Series (or TV show)
Different Set of Images for each episode in Podcast. (Understand how to do this in TV show)
Thanks!

HT4528 im trying to find out how u delete a song that u added from the itunes radio...from iphone???

i am trying to find out how u delete a song that u added from itunes radio....from iphone????

HI nhenson04,
If you are looking to delete downloaded content on your iPhone, you may find the following article helpful:
Apple Support: How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Regards,
- Brenden

Here's a dumb ? I'm trying to find out how I can print from my ipad. I read about air streaming printers. so is a wireless printer considered an air streaming printer. i have 1 pc, my mac

here's a dumb ? I'm trying to find out how I can print from my ipad. I read about air streaming printers. so is a wireless printer considered an air streaming printer. i have 1 pc, my mac

If you already have a printer, you can probable use a program like, printopia to let your mac share your printer with the iOS device like your iPad. The catch being your computer has to be on, and not asleep, for the printer to work with your iPad.
If you need a printer that is airprint ready, you can find a list on AirPrint, wireless printing straight from your iPad. Check out the bottom of the page where it says works with airprint enabled printers. There are even links on the page so you can buy the printers right from Apple's website.

Find out how many times the application was touched by a particular user

Hello,
can anyone please help me out with this issue.
I want to find out how many times the application was accessed by a particular user,their session IDs for each of the applications in a particular workspace. I am using a role based authorization scheme for my application. I am using Oracle APEX 3.2 version. Are their any underlying APEX tables/Views to find out the above details.
thanks,
Orton

Hi,
Have you check views APEX_WORKSPACE_ACCESS_LOG and APEX_WORKSPACE_ACTIVITY_LOG
Regards,
Jari
Edited by: jarola on Oct 20, 2010 7:37 AM
This might help also
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/advnc.htm#CHDDHGJI

I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17 by 11 paper with the sections in the right order. Any help?

I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17 by 11 paper with the sections in the right order. Any help?

If all you are going to do is print double sided and them make
a single fold reducing the page to 8 1/2 x 11, one side of the
original 17 x 11 page will be page 4 on the left as you hold
the page facing you and page 1 on the right, reverse side
should be printed so top is same as top on the the first side
and will be page 2 to the left and page 3 to the right. Pick
up the double sided document with pages 2 and 3 facing you, fold
left edge to meet right edge; you should now have fold on the left
with page 1 facing up toward you, turn the page as you normally
would and pages 2 & 3 should be in order, and one more turn brings
you to page 4 and the fold should know be on the right. I hope this
explains clearly enough - if not, post back and some one should
join in with a better explanation.

HT2931 I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

Hello Mattxy2,
Thank you for the question. It sounds like you would like to add some Apple Loops to your project. I recommend reviewing the following sections in Garageband Help:
GarageBand Help - Search for Apple Loops
http://help.apple.com/garageband/mac/10.0/#gbnd3002ab64
GarageBand Help - Add Apple Loops to your projects
http://help.apple.com/garageband/mac/10.0/#gbndc1d3db81
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

Similar Messages

Maybe you are looking for