I am trying to find out the proper graphic card for mac.

I am trying to find out the proper graphic card for imac. The graphic card which is mentioned in the web sit, that Graphic Card is not available in the open market. In open market NVIDIA GeForce GT 750M and NVIDIA GeForce GT 755M is available and this card is not mentioned in web site. So please help to select a proper suitable GPU.

Are they supportable for After Effects ray-traced 3d renderer.
I am confused because adobe recommended on the following graphic card.
Mac OS
GeForce GTX 285
GeForce GTX 675MX
GeForce GTX 680
GeForce GTX 680MX
GeForce GT 650M
Quadro CX
Quadro FX 4800
Quadro 4000
Quadro K5000

Similar Messages

HT5035 i have a gift card , trying to find out the balance i have the card number but don't have a pin number

i am trying to find out the balance of a itunes gift card but it is asking for a pin number but there doesn't appear to have one on the card.
i entered the number on the back of the card but it keeps saying to enter a pin number
can you help?

Hello Kelleyfromon
Look for the area to scratch off for the pin number. If you do not see it, then check out the article below for some troubleshooting options to help you out.
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
Regards,
-Norm G.

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
      vl_char(6) type c,
      vl_qty type INRI-QUANTITY,
      vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = '01'
    OBJECT                        = 'ZRG0000001'
   QUANTITY                       = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
   NUMBER                        = vl_num
   QUANTITY                      = vl_qty
   RETURNCODE                    = vl_rc
EXCEPTIONS
   INTERVAL_NOT_FOUND            = 1
   NUMBER_RANGE_NOT_INTERN       = 2
   OBJECT_NOT_FOUND              = 3
   QUANTITY_IS_0                 = 4
   QUANTITY_IS_NOT_1             = 5
   INTERVAL_OVERFLOW             = 6
   BUFFER_OVERFLOW               = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

Is there any way I can find out the service record on this mac ?

I purchased a used QS from an authorized apple dealer at their after boxing day sales event. This QS is extremely quite compared to my polar express MDD.
Is there any way I can find out the service record on this mac ?
Somewhere away back when I heard that by knowing the serial number the details of the service record on the given mac could be found. However in those days I only bought new. These days with mac's inability to run applications that require the for real OS 9 ( not classic ) I have to scour the used market. I have some high end audio midi programmes ( for example emagic, cubase VST score ) that do the job and sometimes better then then the OS X versions.

Hello,
You can use System.getProperty("SAPSYSTEMNAME"); in your UDF as specified in this thread.
Get name of XI System in mapping
Hope this helps,
Mark
Edited by: Mark Dihiansan on Apr 27, 2011 7:51 AM

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

How to find out the last time login for a locked login account?

In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?

Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time?

Sub:find out the user exit report for any tc

Hi,
i want to find out the user exit report for any tc
Thanks,
jayaraj

Hi,
Pls go through it the following coding. It will helps u.
*& Report YMS_USEREXITTEST *
REPORT YMS_USEREXITTEST no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR' and object = 'FUGR' and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR' and object = 'SMOD' and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt where sprsl = sy-langu and name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
-End of Program-
Thanks,
Shankar

HT4664 What is the best graphics card for FCPX?

In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
"Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
Apple lists this card on its support page: http://support.apple.com/kb/HT4664
So,
What is the best graphics card for FCPX?

Ben,
Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

What's the best graphic card for FCP X and a Mac Pro (early) 2008?

I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
Thx,
Phil

You can get a 5770 radeon ATI MAC card
Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards.
Buy it from Apple online store or B&H photo or Macconection
And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

Intel HD Graphics 4000 IS THE ONLY GRAPHICS CARD FOR MINI?

Intel HD Graphics 4000 IS THE ONLY GRAPHICS CARD FOR MINI? OR APPLE SELLS Minis WITH A REAL GRAPHICS CARD?

lse123 wrote:
BOTH MINIS AND APPLE EXT OPTICAL DRIVE are dual band 110V/240V correct?
how much size has the box of mini and the optical drive?
Look here for what you want:
http://www.apple.com/mac-mini/specs.html

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

In DBI , how to find out the Source Query used for the Report

Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj Shrivastava

Hi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

Hw to find out the Print program name for SF?

HI Guys,
I have a Smart form in SRM system. i wanted to find out the print program for this. i know we can find out with Table TNAPR, But this table is not existed in SRM System for my client. Any alternate solution for this..?
Pls let me know.
Akshitha.

Hi
Byusing the Tables Tnapr & TTXFP u can get the details of driver program of your script or smartform
Or
Goto NACE->select the Application type(EF-purchase order)->select output types->NEU for new PO printout->double click on process routines_> sscroll right->specfiy ur form and print proggram there(instead of MEDRUCK give ZMEDRUCK)->save
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Regards
Pavan

I am trying to find out the proper graphic card for mac.

Similar Messages

Maybe you are looking for