I am trying to find the network security key for my airport extreme router

I am trying to find the network security key for my airport extreme so I can hook up my pc lap top.

I am afraid that the "key" will be of no use to you (it is 64 characters long).....but I hope I am wrong.
Since you indicate that you are using an iPad, I assume that you are also using AirPort Utility on the iPad.
On the iPad home screen, tap AirPort Utility
Tap on the AirPort Extreme
Tap on Edit
Tap on Advanced
Tap on Show Passwords
Tap on Main Network and "key" will be revealed

Similar Messages

  • Finding the Network Security Key

    I bought an HP laptop in August and I have a wireless router at my home. The problem is, when I stay at my father's house every other weekend, I need to access his wireless router in order to gain access to the internet to complete my school work. My older brother, who set up the router, refuses to tell me what the network security key is or where to find it. I need to know, so that I can access the internet to get work done. I haven't been able to find it by myself.

    Unfortunately there will be no way to connect wirelessly to this network without having the access key.
    But, you should be able to simply use a network cable to plug directly into the router.  Provided no other access restrictions are in place, no wireless key is needed to access the network.

  • HT201514 My Smart TV is asking me for my security key for my airport extreme, wher do I find this?

    My Smart TV is asking for my Airport extreme security key, where do I find this?

    You can find this via the AirPort Utility, as follows:
    Run the AirPort Utility.
    Select your AirPort Extreme, and then, select Edit.
    From the utility's menu bar, select Base Station, then Show Passwords...
    The security key will be the second item, labled: WPA Pre-Shared Key for "<your network name>"

  • I tried to find the reset security questions button on manage apple id but couldn't find it. Please help me reset my security questions?

    I tried to find the reset security questions button on manage apple id but couldn't find it. Please help me reset my security questions?

    The reset link, as described in steps 1 to 5 on this page, will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have one then go to (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • How to find my network security key

    I recently installed Windows 7 on my MBP (OS Mavericks). I am trying to make a connection from Windows to my home network (Airport Extreme). When I do so, I'm asked for the "network security key." How do I find that? I've searched everywhere I know how, to no avail. My network works fine w/ my MBP running Mavericks. Can someone help me?

    The "key" is another word for your normal wireless network "password", sometimes called a "pass phrase".
    The password generates a 64 character code of random letters and numbers. I doubt that this would be of any use to you, but if you want to see it.....
    Open AirPort Utility on your Mavericks Mac
    Click the AirPort icon, the click Edit
    Click the Base Station icon at the top of the screen
    Click Show Passwords
    More likely, you have a Windows Firewall issue, or Microsoft Security Essentials...if installed....is blocking the connection.  The anti-virus program can do the same thing.

  • How do you find wifi network security key?

    How do you find the wifi network Security Key?  Not password --- KEY?

    The "key" is probably totally useless to you, since it is 64 characters long and very few things will accept an item of this length.
    If you have an Apple AirPort router, we can tell you how to find the "key" for the network that it is creating, if you can tell us what operating system your Mac is using.
    Most manufacturers use the term "key" to mean the normal wireless network password, which is also known as passkey.

  • Need to find the latest security update for firefox browser

    Due to PCI SOX compliance i need Firefox should be updated with latest security updates.
    Please let me know the way from where i can get the latest security update for different version of Firefox.

    Hello,
    If you update Firefox and its plugins to the last versions you will have the last security updates:
    *[http://www.mozilla.org/en-US/firefox/new/ Firefox]
    *[http://www.mozilla.org/en-US/plugincheck/ Check Plugins]

  • How can I force my Second Generation Airport Extreme to use 2.4GHz when extending the network of my Fifth Generation Airport Extreme?

    Hi,
    Would be great if anyone can help.  I have setup my Second Generation Airport Extreme to extend the network of the Fifth Generation Airport Extreme.  The 2nd generation Airport extreme seems to automatically get set to use 5GHz vs 2.4GHz.  I would like to force it to use 2.4GHz so my older devices can connect to it.  Any help would be appreciated.
    Thanks,
    Mike.

    Enable the option to assign a different name to the 5 GHz network on your 5th Gen AirPort Extreme.
    Then, the 2nd Gen Extreme will only "see" the 2.4 GHz network, and extend that signal.
    If you are not sure how to do this, post back to tell us what operating system you are using on your computer so we will know what version of AirPort Utility you are using....so we can provide the correct steps for the setup.

  • Trying to get my air video app and my airport extreme router to work.

    Hi there. I am getting really frustrated and desperate. I just purchased the app "air video" on my iPad. Installed the software on my mac. Works awesome when I'm on MY WIRELESS NETWORK. I didn't think it would be an issue once I left the house and tried to go on someone else's network to connect, but it just won't work. It keeps giving me the error "host not reachable". I tried opening up the air video troubleshooting info and tried everything but nothing seems to work. I tried under the "remote" tab in the air video server preferences. I clicked both "enable access from Internet" and the "auto map port" options. In the box below I just see the word status and the spinning wheel along with "looking for UPnP or NAT-PMP compatible devices" but the wheel has been spinning for about 15 mins. It doesnt appear to be finding anything.
    I've also clicked off the "auto map port" to see if that would do anything. I got the pin and tried that. Still nothing. I tried to look for some information on port forwarding for my airport extreme but everything I'm googleing seems to be years out of date.
    I am currently on Mac snow leopard 10.6.3 I believe. Everything is latest version. Using comcast modem with apple airport extreme router. Latest version of Air video app and software. On iOS 4.3.1.
    Anyone that can try to help me out, I would be eternally grateful.
    Thank you so much
    Keith

    * need to edit to" trying to get my iPhone not iPhoto**"

  • Where can I find the latest security hotfix for CF 9.0.2?

    ZDNet announces there is a security hotfix for ColdFusion but provides no link to where I can read about it or download it. I go to the Adobe site and look for it by browsing and searching and can't find it. It's been hidden well.
    Maybe the ZDNet announcement was made prior to Adobe updating their website? Or maybe I just can't find what is obvious for others.

    Adobe published it yesterday, you just have to know where to look: http://helpx.adobe.com/security.html is always updated with the latest from the Adobe Security team. More specifically you are looking for this: http://helpx.adobe.com/security/products/coldfusion/apsb14-23.html
    Pete Freitag
    Foundeo Inc. - Makers of HackMyCF 

  • Trying to find the correct Oracle version for SCO Unix 5.06

    Please I will appreciate you can help me indicating where can I download the correct Oracle version for SCO Unix 5.06. I have downloaded the Tru64 Compaq version but it is not working with SCO.
    Best regards
    Armando Delgado
    00511 8105860
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    This is pretty old. From the certify matrix, you can see the last available versions this platform supported were 9.0.1 and 8.1.7, just for the Intel SCO Open UNIX 8 with LKP. SCO 5.0 last time I used it was with an Oracle7.3 release. In case you don't have software it'll be hard to find, unless you address this to your Oracle Representative.
    Are you absolutely required to run on this version? Otherwise, you could try new software and new oracle releases, unless you want to run unsupported.
    ~ Madrid.

  • How to find the right primary key for DSO from Business Content

    According to best practice design, it is reccomended to make a  DSO where all fields from Business COntent Datasources are transferred.
    But, how to find the right primary indeks ?
    Any good suggestions ?
    For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
    best Regards
    Ingrid

    Hi Ingrid,
    Your question will be perfect in case if you are going for a Custom cube.
    You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
    Only point that you want to know how to design my Key fields in ODS.
    This will be purely depends at what level that you want to bring the data.
    Egg:-
    If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
    In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
    This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
    If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
    For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
    I think this will clear your doubt.
    Best Regards,
    VNK.

  • Where can I find the Wi-Fi Specifications for my Airport Express?

    When I open up the airport utility is shows my airport extreme base station is 802.11n but that information does not show up when I click on the airport express. I would like to make sure my airport express is also 802.11n as I bought this in the first wave released.
    thanks for your the help.

    If your AirPort Express Base Station (AX) is Part# MB321LL/A or Model# A1264 then it is an 802.11n model.

  • I can't find an ac power adaptor for my AirPort Extreme base station.

    I was given an AirPort Extreme base station, the square model, I just need an ac power adaptor. I can't seem to find one that will definitely fit. Help please?

    It is easier and better to give the model number from the base.. A1143 is the oldest Airport Extreme that is N wireless.
    http://en.wikipedia.org/wiki/AirPort_Extreme
    All the models from Gen1 to Gen5 use the same power supply.. 12v 1.8A
    But it can be replaced with any standard 12v supply.. of sufficient current rating.
    The real thing is expensive. It still doesn't have the Apple cord.
    http://www.ebay.com.au/itm/New-Genuine-A1202-12V-1-8A-Power-Supply-AC-ADAPTER-fo r-Apple-Airport-Base-/290923848575?pt=US_Power_Supplies&hash=item43bc69a37f&_uhb =1
    Buy a power supply rated at 12v 3a 4a or 5a .. any of those ratings will work well.
    I generally buy 4a or 5a. as they tend to be a bit better. Although if you check they all seem identical to each other..
    Check in your local market if you want one fast.. just do ebay search for 12v 4a power supply..
    http://www.ebay.com/itm/I-MAG-Electronics-IM120EU-400D-Genuine-OEM-12V-4A-AC-Pow er-Supply-Adapter-/380641968538?pt=Laptop_Adapters_Chargers&hash=item58a007819a
    Power cord is probably a standard IEC computer cable.
    Cheaper from HK but if you want reasonable quality pay around $10US.. cheaper can be rubbish.

  • Trying to find the Network Activity number from the CATSPS table

    Hi Experts
    I am trying to build a report to show unprocessed time on Network Activities. The time is entered via CAT2 and transferred to CATSPS via the CATA job.
    Once the data hits the table, an internal system number is given to activity.
    I have the following example:
    Say I have three Network Activities all linked to the same Network and WBS as follows:
    Network   Activity #
    43000121  0001
    43000121  0002
    43000121  MTS
    When I post time against the 2nd and 3rd NWAu2019s, CATSPS has the following entries:
    RNPLNR               RAUFPL                RAPLZL
    000043000121    0000000182         00000002
    000043000121    0000000182         00000003
    Now the RAPLZL field has no visual link to the NWA.
    Does anyone know of the Internal table that holds the link between the RAPLZL field and the Activity that is represents.
    I have already looked at PLPO (no entries).
    Any other suggestions would be appreciated.
    Thank you in advance

    Match the entries RAUFPL, RAPLZL of CATSPS with AUFPL, APLZL of AFVC table, you will get the activity number(VORNR)

Maybe you are looking for

  • Run ARM when turned on

    Hi all, When I upload a VI in to my lm3S8962 board, it run as long as  it is connected to the PC. If I disconnect the PC, turn off the board the turn it on without connecting to the PC it doesn't run. Is there a way to let the VI run automatically by

  • What is a Frame work

    Hi i am a new bie to java Programming. what is collection frame work and where they are used like whatis vector,hashmap,hashtable. in which contect each one used. I was wondering if some give me some examples or link to any of the sites which explain

  • Cant accept shared scripts

    Every time I try to accept a shared script I get an error saying I already have the script in my projects, but I dont.  Anyone else have this problem or a way to fix this?

  • Consolidate YTD Member in Scenario Dimension

    Hi All my Peers, What Exactly the Purpose of " Consolidate YTD Member in Scenario Dimension. my Analysis is as bellow, please Guide me if my Thinking is Wrong and also is this Member Focus and Refer or Check or Cross Check with any other Member to St

  • Serious Boot Issue,What Is This?

    So,my G3 Blue and White i had bought it off ebay and the Hard Drive was full,so i installed a DVD ROM Drive to install Mac OS X 10.3,the Hard Drive had 10.4 Already installed but i formatted the Hard Drive. So I reboot the machine and it gives me thi