I am trying to fit information in a text box. Is there way to move the information further up. There is a lot of wasted space on the top.

I am trying to fit information in a text box. Is there way to move the information further up. There is a lot of wasted space on the top.

Shane's psychic powers are amazing..... I would have asked 'what text box?'
...and so, yet another inquisition begins!
The Mystic North

Similar Messages

  • HT5848 Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will  forever be trying to sell me on using it. Its fr

    Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will  forever be trying to sell me on using it. Its free, I know.    Still not using it.

    Margthecar wrote:
      Apple has to stop pretending that their technology is not complicated.  It is.  Apple has to stop pretending users won’t have problems.  They will.  Apple needs to train their employees in their own technology.
    Awesome post.  This is the best description I've seen of what continually makes me angry about Apple.  I guess their attitude is, "Whoa, look at all this money!  If it ain't broke, why fix it?"  And Margthecar the I keep shoveling money into their coffers ....

  • Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets.

    Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks

    Hi
    Yes - This is important.
    Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
    My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
    This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
    So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
    • Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
    • External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
    Yours Bengt W

  • Can someone help me with pages on iPad. I am trying to group a text box with a media image and the group option is not appearing.

    I have tried all different combinations of objects to see if that is the problem but still no group options.
    I have also tried with 2, 3, 4 & 5 objects.
    I have managed this before, by obviously by chance.
    Thanks in advance

    Ok as per my previous message a few months ago, I realised I hadn't changed the Move with Text to Off.  Now It's fine!

  • Font fitting to edge of text box

    Hi all,
    Does anyone know if it's possible to force a font to go the edge of a text frame? Some fonts have generous space above the cap height of the letters inside a text frame. But I would like the text frame to be the same size (height) as the font inside the frame.
    Regards, Tim

    Check out your Text Frame Options - select the frame and go to Object>Text Frame Options
    Then go to the Baseline Tab
    Then check out the First Baseline Option - and turn on the preview to view your changes.
    That will give you the option to have X height, Cap Height, accent etc.
    If you want to get right out the edge of a frame on the left side then check out the Window>Types and Tables>Story and turn on optical alignment, that will allow punctuation to hang out side the text frame, not only that but the arms of "T" and letters like that will also extend past the frame edge, with a negative value.

  • I'm in Lightroom 4 and trying to type text into individual slides and the text box does not let me

    In help Lightroom 4 tells me to go custom text pop-up in the slideshow module and choose a metadata option. All I want to do is add some text to some of the slides in my slide show. Since text and or caption options are not avaliabe I tried using the title option which brought up a text box that I could place on the screen but NOT type into, why not? what am I missing here? Also after editing the 490 photos I want to put them onto a DVD as an OTHG 2011 file to give to my backpacking group but Lightfoom does not explain how to create these DVDs. Thanks for your help. Hart 

    When you set that popup to 'Title', say, the slides will get a label that is filled in from the 'title' metadata, which you set for each photo in the Library Module.
    Try it.
    Hal

  • HI, I am trying to connect my macbook pro,  18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector.  It all fits but the there is nothing happening? no mirroring option. Any ideas?

    HI, I am trying to connect my macbook pro,  18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector.  It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated.  Many thanks

    to get to the Detect Displays button you have to hold down the Option key and the button appears.
    SeanfromFulham wrote:
    Many thanks, however I don't seem to have any relevant options under displays.

  • No phone service; Trying to update information in repair work order

    The only thing on this website that works is posting this forum and reading my bill. I have no phone service since last week and opened a repair work order. I am now trying to check status and update my contact # in that request. I had to buy a cheap prepaid phone at Best Buy so we had phone service at home and would like to provide that number in the work order. All I get when trying to check status of repair is a gateway error as the proxy server cannot communicate upstream. So if a Verizon tech reads this forum please send me an email so I know what is going on. I do not have enough minutes on my pre paid phone to stay on hold for hours trying to get through to a human. I tried that all week using a phone at work.

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

    I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • TA21610 Trying to fit screen size when using 42" tv for Mac mini

    Trying to fit screen for Samsung tv. The current view is too large. Tried the system preference display options. It remain to large 42" screen with 1080p 60Hz

    Do you see a Scaled option next to Resolution: ...?
    If so, select Scaled and try choosing the highest Resolution in the list.

  • Some of the pictures I am trying to use don't quite fit into the pre-set frames... Is there a way to move just the photo with-in the frame so to use the best part of the picture?

    Some of the pictures I am trying to use in Idvd don't quite fit into the specified frame... Is there a way to just move the picture itself within the frame to use the best part of the pic... For example I'm trying to use a picture of my son..but his head gets cut off when I drag the picture into the place holder....

    When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
    Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
    I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
    Note: ExFAT and NTFS formats aren't supported.
    http://support.apple.com/kb/HT2426

  • Trying to fit output of XY Graph

    Hello, I'm trying to fit the output of an XY graph which is (1-D Array of Cluster of 2 Elements(2x 1-D Array of Double[64-bit Real])). It seems like instead of having one array with two columns X,Y indexed persample number, I want to have a 1-D Array of Column Y , indexed by X. Any ideas?
    Thanks.
    Solved!
    Go to Solution.

    lefterisa wrote:
    I'm getting NaN on the slope and intercept outputs, is there a way to take the output of the XY Graph Local Variable feed it into the Curve Fitting VI and then add the fitted curve back into the XY graph?
    Please attach your VI and some typical data. Most likely one of your points is NaN, in which case the linear fit will fail of course.
    You really have some misconceptions. An XY graph is a data sink, and not a data source and faking it with local variables just complicates things.
    So what you should do it take the output from the xy express VI, remove the points containing NaN, do the linear fit, and send both to the same xy graph terminal. You only need to write to the graph once.
    Message Edited by altenbach on 11-06-2008 03:37 PM
    LabVIEW Champion . Do more with less code and in less time .

  • Trying to fit a curve with restrictions

    I am trying to fit my experimental data with my own function y=a*exp(-x/b)+(1-a)*exp(-x/c) and I want the "a" paremeter to be >0 when doing the fitting.
    Is there anyway to do so?
    Thanks!

    sleepyqueen wrote:
    what if I use 7.0 vision? Is there any way to realize Constrained Nonlinear Curve Fit use Labview 7.0?
     Yes, but you have to do it all yourself from scratch.
    LabVIEW Champion . Do more with less code and in less time .

  • Hi, I updated my iPhone 5 to 6.1.3 ,and I'm trying to update my apps but it asking me to sign in to the billing information. So could you please help me . Thank You

    Hi, I updated my iPhone 5 to 6.1.3 ,and I'm trying to update my apps but it asking me to sign in to the billing information. So could you please help me . Thank You

    Take the SIM out and reseat it.  Was your phone jailbroken or unooficially unlocked?  If so then when you upgraded the phone locked again to the original carrier.  If that is the case you need a SIM from that carrier to use the phone or you could contact that carrier and have them unlock it for you

  • I'm trying to find information on a form of message I have received to my iPhone. It appears on locked screen and I must press the green Dismiss icon at bottom to get rid of the message from the unknown sender and to then enter my pass code to enter my is

    I am trying to find information about a type of message I received on my iPhone. It appears as the message only on my locked screen, I must press on the green Dismiss icon at the bottom and the message disappears and then I can unlock my phone with passcode and use phone. This message stays there until I press Dismiss. It shows no sender or where it came from but is being sent to my phone number. Only a message the sender intends me to read shows on the screen then once dismissed, it disappears and does not show up or save in any application on my phone. Any ideas?

    Click here and request assistance.
    (91679)

Maybe you are looking for