I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

i don't know what i am doing wrong and have tried to follow instructions on the discussion page , set up extend network and shareing on, but i still don't have a green to go on the base station, and either have to be on my 4G telstra network , or back into wi-fi and tick time capsule network. one or the other. i don't understand a lot of this stuff .

leanne5725 wrote:
I have a telstra modem/wireless thingy. Unsure what you mean by using the Apple router as AP only (what do you mean by AP).
AP is access point.. ie wireless point to access the network.. also called WAP.. wireless access point.
Also I keep getting a message saying (PROXY error - the proxy server received an invalid response from an upstream server. The proxy server could not handle the request) - then I go back out, then back in a few times and it works. Also, a box keeps coming up saying (bad gateway), but Ive never had a problem before I had this apple computer.
It is just today.. some proxy has been fixed.. openssl updated?? Anyway.. it is fine now. I could not get on this site at all for the last few hours.. same issue.
What Apple routers do you own now??
You can plug it into the TG797N (wan on apple router.. to LAN on Telstra router) and run it in router bridge..
And create a wireless network..
Then connect your clients to the Apple wireless instead of the TG797N wireless.

Similar Messages

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

This is more about your modem then anything. Sometimes you'll need to unplug and plug back in your modem. Consider it a glitch from the ISP or just the modem in general.
when I need to turn something off then on I try the modem first. This when I'm not doing any ware and tare to the device.

I am trying to connect an airport extreme to extend my wifi coverage and it doesn't work

I hope someone can help me.
I have an Apple Airport extreme gen 5. I have a BT router/modem that I connect to my broadband and its signal is OK but not great. I have multiple apple devices, a windows PC, and a Panasonic smart TV.
I also use Belkin poweline adaptors to attach the TV and apple TV to my network - its flaky.
I was trying to attach the airport extreme to a powline adaptor in the lounge to extend my wireless network - it was green for a while but then flashed orange and stopped working.
I have now reattached it directly to my router in the same room with an Ethernet cable and still get the orange light and the airport utility keeps asking to attach to the WAN port but then nothing works - I can still acccess the internet through my existing bt modem/router.
Any ideas please?

Click the Wireless tab just below the row of icons
Make sure that the setting for Wireless Mode is set to Create a wireless network
The Wireless Network name would be the same name as the BT network
The Wireless Security would be the same setting that the BT router is using....should be WPA2 Personal or WPA/WPA Personal
The Wireless Password would be the same password as the BT network
Verify Password
Click the Internet icon
Click the Internet Connection tab just below the icon
The setting for Connect Using should be Ethernet
The setting for Connection Sharing should be Off (Bridge Mode)
Click the Update button at lower right of the window and allow a full minute for the AirPort to restart
Power off both the BT modem/router and the AirPort
Wait a minute
Power up the BT device first for a few minutes
Then, power up the AirPort
Everything above is a "quick fix". If that does not work, we will have to start all over again from scratch.

My ipod won't sync and it keeps coming up with an error message saying "internal error" or it tries to get me to restore from a backup. All of my music and movies have been wiped from my ipod and the apps don't work. The backups don't work either. help.

I plugged my ipod touch into my computer to sync it and it came up with an error message saying that it encoutered an internal error and it refused to sync.
I then unplugged it and plugged it back in and this time it told me that I needed to restore from a backup or set it up as a new ipod. I tried to restore from a backup but it came up with the error message "Backup session failed" every time. I then looked on my ipod and all of my music and movies are gone though it still says that they are on the ipod in itunes. I decided to use the restore function and let that finish. After restoring it still doesn't allow me to sync or back up and The music and movies can still not be seen. I am currently attempting to copy the music and movies to my ipod though this did not work with my apps as they transfered but when I attempted to open them they just crash... If someone could please help me it would be great. It is driving me crazy.

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

I'm trying to get all of my information from my iPhone to my new iPad and I have both synced with I could but I am unable to get my apps/music/photos ect on my iPad

I am having trouble getting my apps/photos/music from my iPhone to my iPad. I have both synced to my I cloud but I cannot get anything to appear on my iPad

What exactly did you try? You have to restore the iPad from the phone backup and download the apps again if you are using iCloud. If you are using iTunes, the process is basically the same but you have to sync the apps back to the iPad.

HELP! Problem with setting up Airport Extreme in "extend wireless network mode"!

So I am trying to put my AirPort extreme in extend a wireless network mode. So I factory reset it, plugged it in, and went into Airport Utility to set it up. So it finds the device, and I set it up to extend the network. It does everything, and it gets set up. But there is an error message that says it was unable to extend the wireless network. Then 1 minute later, the Airport Extreme drops out, and the Airport Utility says device not found. I tried this multiple times, and it keeps happening. What should I do?

Unfortunately, the AirPort Extreme will not be able to wirelessly extend a Netgear product. That feature will only work if you are connecting the AirPort Extreme to another Apple router.
If you want the AirPort Exteme to provide more wireless coverage, you will need to plan to connect it to the Netgear router using a permanent, wired Ethernet cable connection.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

I'm trying to access my airport extreme to make port forwarding changes by using the default IP 10.0.1.1 but I get no login menu. Where is my login menu?

I'm trying to access my airport extreme by using IP 10.0.1.1 but I get no log in screen. Where is my login screen?

Download and install......
AirPort Utility 5.5.3 for Windows - Support - Apple.......assumes that you are running XP SP3
or
AirPort Utility 5.4.2 for Windows - Support - Apple......assumes that you running XP SP2
and
Bonjour Print Services for Windows v2.0.2 - Support - Apple
Expect the Windows Firewall to block the connection attempt between the application and the AirPort, so you will likely have to turn it off to configure the AirPort.
The anti-virus program and Microsoft Security Essentials can do the same thing.

Help! - I can't get my airport extreme 802.11n to work

Hi everyone,
So yesterday I purchased and attempted to set up my new 802.11n AirPort Extreme, however I could never seem to get it to establish a connection (even though the ethernet clearly works, as I am typing this message with it now connected directly into my imac). The airport said that it created a network and the light was on a solid green, indicating that it was working properly.
So, in my infinite wisdom I tried to monkey with all of the settings in the AirPort Utility. In the process of doing this, I tried to click the "join a network" instead of "create a new wireless network." Now when I try to find my wireless airport, it can't even locate any AirPort devices
I have tried to "reset" my AirPort Extreme by inserting a pen into the reset button and holding it down, but it does not seem to work. Is there any other way to reset this device back to it's initial factory settings so that I can try to set it up again?
If anyone has any ideas, I could certainly use the help.
Thanks,
Sean

Sean, hold in the reset button on the AirPort Extreme until you see the amber light begin to blink more quickly. Keep holding another 3-4 seconds when you see this and then release the reset button.
That should allow Airport Utility to "see" the device so that you can reconfigure it.
When you say that the ethernet works, I assume this the connection from your modem. If you have a cable modem, you will need to completely reset it so that it will associate with the AirPort Extreme.
Push the reset button on the cable modem
Power it off
Pull the battery if it is easily accessible
Leave it off at least 20-25 minutes or longer before you power it back up
This information above assumes that you have a cable modem. If you have a different type of connection, post back on your progress.

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

Trying to set up airport extreme. Blinking amber light but airport utility says no configured base stations have been found. Have unplugged base and reset.

I have tried to set up airport extreme base stations but keep getting blinking amber lights. Have unplugged and reset. No base station prompt noted in the airport utility window. Internet connetion noted (Green light under globe icon)

Are you using 6.0 here?
What kind of AEXT are you using?

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

I cannot get my Airport Extreme to talk to my cable modem

I cannot get my Airport Extreme to talk to my cable modem. Cable modem is a Cisco, new, Charter cable company. New wires throughout. Connected to internet currently hardwired to cable modem. So I have internet service to the modem.

The modem needs an extended power down period in order to reset, as it is "remembering" your computer and thus will not associate with the AirPort Extreme.
See this User Tip from forum expert Tesserax:
AirPort - Complete Power Recycle

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

Similar Messages

Maybe you are looking for